Best Boat Load Mate in 2026

WHAT IS BOAT-LOAD-MATE? It’s an auto boat latch that secures your boat to your trailer & allows you to launch and load your boat in seconds with absolutely no effort. When launching your boat, unhook your tie-down straps, back the trailer into the water and the boat will float over the latch. When loading, back your trailer into the water to the correct depth then float your boat onto your trailer until the spring loaded latch is engaged.

QUICK: Launch your boat in just seconds! Spending less time on the boat ramp reduces your chance for accidents, injuries, and damage to your equipment. Boat-Load-Mate enables you to get your boat in & out of the water in just seconds.

EASY: Boat-Load-Mate is the easiest way to trailer a boat. No more struggling on the ramp with your tow strap, dock line, or other boat trailer straps. Relieve yourself from cranking on a boat winch or tinkering with tie down straps while on the ramp. Boat-Load-Mate requires absolutely no effort to use. This is the only hassle free boat trailering system on the market.

For brackish or saltwater environments

Anti-corrosive construction

Standard S-hook protects boat's finish

Compared with other products, the magnet we use has a larger surface area, providing suitable magnetic force, which is stable and reliable, convenient to install and disassemble. It is not as difficult to take down as neodymium iron boron magnet

You can pull the webbing to remove the locking key easily without worrying about breaking it. It is held in place by stainless steel rivets. The webbing is made of UV and rain-resistant material

Made of high quality steel, the surface is covered with a bright orange nano-coating to make the surface smoother, less scratch-resistant and more eye-catching. You can see from a distance if it's still on the trailer or truck, so you won't forget to remove it.Key Is Intended For Off Road Use and Boat Yard Use Only

Reliable Performance -Width :2 in Length: 48 in, Rated Capacity: 1200 lb/544 kg Safe Working Load: 400 lb/181 kg

Ideal State-The buckles have padding, so they don’t scratch gel-coat surfaces or paint. What is more, the S-hooks are coated with vinyl, so they do not hurt smooth boat surfaces as well

Superior tie down straps - The Seamander belts are resistant to chemicals and rotting,marine grade

Application: Universal for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc

15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; Passenger Side Serves 6 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector;

19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Driver Side Serves 7 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator;

Trailer ball coupler Fits 3" wide straight trailer tongues and 2" trailer balls,5000 LBS load capacity with Chain

Easy-lock latching system for simple operation.

Features holes to accept a safety pin or coupler lock.

TOUGH AND DURABLE: Prevent up to 20,000lbs for trucks and trailers from unintentionally moving, rolling or overturning even on sloped surfaces

WORKS IN ALL CONDITIONS: All-weather construction makes for reliable performance in any climate and treaded grips works on slippery surfaces.

CONVENIENT TO USE AND NO SMELL: Predrilled hole for securing in pairs by rope or chain or pry off from tire and molded grab handle for easy positioning.

HEAVY DUTY MARINE GRADE: Our winch strap with hook is designed to withstand the harshest conditions whether as a boat trailer winch strap in salt water or jet skis as a lake boat strap or in snow for snowmobile trailers or other off road vehicles.

INCLUDES ZINC COATED WINCH HOOK: Our winch replacement includes an upgraded rust resistant zinc coated steel hook already attached & sewn secure to the heavy duty replacement strap. The bow winch strap has a heavy duty boat hook with spring closure.

UNIVERSAL FIT: Use our winch strap for boat trailer replacements or many other trailer strap winches including snow mobiles & jet ski trailer winch. The replacement winch strap easily installs with almost all system winch towers with a pre-sewn end.

magnetic lock,replacement of silver factory key 34557 - For A60, A70 Actuators perfectly , no more need tape, rubber band, c-clamps or make the someone help you to avoid factory key falling out and down

Magnetic ring with larger surface area to provide suitable magnetic force, Easy to install, stable and reliable, and also easy to remove. We did not use neodymium iron boron magnets because it will cause would be very difficult to install and remove.Key Is Intended For Off Road Use and Boat Yard Use Only

lock out key easy to be remove because come with webbing(Fix with stainless steel rivets).the webbing Made of high-tech materials with UV resistance, Can resist sun exposure and rain corrosion.

PREMIUM TIE DOWN KIT: Our New heavy-duty, 2” wide adjustable boat straps trailer tie down are strong, durable, and reliable. These secure tie-downs allow you to travel with peace of mind with a working load of 300lbs and a break strength of 900lbs.

EASY & QUICK SETUP: The boat tie down straps to trailer include 2 straps each 2" by 48" (4 Foot) long or make them small & short. Quickly hook a black soft touch end to a trailer & the other to your jet ski, transom, gunwale, pontoon, or motorboat.

SECURE & GENTLE: Prevent damage to your watercraft by reducing movement during transit. Our stainless buckle is backed by an oversized 3” protective nylon shield, each hook is PVC coated, and a secure strap holds the clasp locked without a ratchet.

COMPATIBILITY - Magnetic lock replacement of silver factory key 34557 - For A60, A70 Actuators perfectly , no more need tape, rubber band, c-clamps or make the someone help you to avoid factory key falling out and down

EASY TO INSTALL - Compared to the silver brake lock key, the surge brake lockout key is easier to install on the trailer without the tape and C-clamp

DESIGN - Highly visible bright orange key lockout with short webbing loop,you can see from a distance whether it is still on the trailer or truck,so you won't forget to remove it

LOW PROFILE SUBMERSIBLE - Our trailer light has everything you need to get your lighting system up and running. Each kit includes two 12V LED tail and turn signal lights and stainless steel hardware for easy fastening. All of our lights are built with corrosion resistant materials.

LONG-TERM USE - Do you know that our trailer lights are completely sealed and submersible? Its acrylic len are engineered to block water out and ensure the circuits are protected. Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term.

FULLY COMPLIANT - Our lights are 100% compliant with DOT FMVSS108 standards. This ensures that your lights are federally compliant for visibility, durability and reliability, which in turn secures the safety of others. Additionally, DOT compliant lights reduce the risk of liability in the event of property damage or personal injury.

Multi-function Led Trailer Lights: Left and Right LED trailer tail Lights have 6 functions in common: Stop/Turn/Tail/Rear reflector/side reflector/side marker light. 1 additional function for left trailer light: license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat, trailer, truck, snowmobile, etc.

All diodes are LED, NOT incandescent bulbs: 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime. The waterproof trailer tail lights comply with DOT standards which is tested by US lab

Excellent Waterproof/Submersible Lights for Trailer: Sonic Welding Whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens. 18 gauge pure copper wires ensure trailer lights LED do good job underwater

◆RELIABLE PERFORMANCE-Replacement Winch Strap and Safety Hook.Working load at 3300 lbs, breaking strenght at 10,000 lbs

◆UNIVERSAL-Appropriate for most cars, off-road vehicles, vans, Pickup Truck and other models. But it does not apply to heavy goods vehicles. Please do not exceed

◆HEAVY DUTY- Drop forged and heat treated solid metal hooks with safety buckles for extra secure towing and easy hook up

Multi-functions: Combined functions of tail, brake/turn signals, side marker, license plate light. Perfect for 12V DC vehicles with a maximum width of 80 inches. Such as most of trailers, boats, trucks, RV, Marine, Pickups, camper, tractors etc

Excellent Brightness: Left lamp has 27 diodes including 9 diodes for license plate light, right lamp has 12 diodes. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety

Entirely Submersible: The inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection

6" Submersible LED Tail Light Kit with Electrial Connectors and Mounting Hardware - Lifetime Warranty on LED Lights

Reliable performance over 100,000 hours | IP68 Rated - Dust and water proof with hermetic seal

Functions include: Stop Turn Tail Clearance Side marker License (left) Side/Rear reflector

Capacity: 1500 pounds

Wind: side

Swing back dual wheel

over 12 LED super diodes for each light. Wiring Information: 8" submersible lights have 3 wires (one with ground ring).

Included: 2 Red Submersible Trailer Lights. .

Function: Stop, Turn, Tail Light, License Plate Illuminator

WIDE USAGE: The kit includes 2 side marker lamps and 4 mounting screws, can be widely used as side marker lights, clearance lamps, reflector ligths and also replacement for trailer running light. Each light has 4 LED, 2 more than normal similar lights. Brighter & Safer.

SUBMERSIBLE: The side marker lights adopt ABS housing and PMMA lens, with sonic sealed for submersible. Waterproof rate IP68.

FITMENT TYPE: CZC AUTO amber side clearance lights is very suitable for marine boat trailer truck RV and all 12V vehicles.

Kit includes 2 combination Submersible running/stop/tail/turn signal lights,license plate bracket and Mounting Hardware， 25ft length of 4 pin wire Harness for enough use.UPDATE ON 9TH,JUNE,2019.FOR BETTER SERVICE ON OUR CUSTOMER,WE IMPROVED THE WIREHARNESS TO 18GAUGE 100% COPPER WIRE FOR WATERPROOF USE

Waterproof and Submersible Feature and Testing（2nd Image）：We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater

Left light have 22 diodes which include 4 diodes for lincense plate light function,Right light have 18 diode. Super bright LED quality ,Complies with DOT standards

NO TOOLS NEEDED - Easily adapt your 7-WAY RV BLADE vehicle socket to 5-WAY FLAT connector used on lightweight trailers.

NO MORE UGLY DANGLING CONNECTORS - Our 7-way blade to 5-way flat adapter eliminates the need of converter wiring harnesses and is compact enough to be stored in any of the vehicle's storage compartments.

RUGGED NYLON HOUSING - Water, temperature, and shock resistant to provide years of reliable service.

Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition.

BENEFIT of its new design - With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel’s diameter, the range of length is 23 - 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats.

The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.

UPGRADE TRAILER LIGHT: Come with additional atomization strip, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights. No glare LED, maximizing light output and giving motorists behind you a better indication of when you're braking, turning or reversing and thus boosting their response time.

SEALED WATERPROOF TRAILER LIGHT: No screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible. Also, it can effectively resist damage of sand, dust, dirt, snow and other horrible weather.

SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use.

HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.

IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.

Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT approved standards

SUPERIOR BREAK STRENGTH. Breaking strength is 5000lbs per strap, 10000lbs per pair. Made from thicker nylon webbing, 1.6 inches heavy duty ratchet metal buckle and heavy S hook, Ayaport boat trailer transom tie down straps are over 2 times stronger than 1" ratchet tie down straps, 4 times stronger than traditional marine tie down set. Make you peace in mind that your boat, jet ski, kayak or canoe are secured safely to your trailer during traveling.

EASY AND SAFETY. As simple as hook and tighten. They enable a range of distance between the attachment points on your Boat, Jet ski or PWC and your trailer of between 18” and 48”.

FUNCTIONAL SAFETY LOCK CLIP. Durable coated “S" hook with safety lock clip to ensure your boat equipment is safe during transportation.

Made to last - The boat trailer carpeting is made of contractor marine grade carpet. Bunk carpet for boat trailers is tear and UV resistant. SturdyShape marine bunk carpet will resit over time and provide protection for your boat

Wide applications - Boat carpet can be used on decking, boat carpeting pontoon to reduce slips & trips. Bunk covers for boat trailers to protect your boat / ski jet. Other applications as Van Conversion marine carpeting lining & Garage floor lining

Boat trailer bunk carpet kit - Marine carpet for boats kit will provide you with Extra products that you need to do the job. The bunk trailer carpet kit includes 1 bunk rail carpet - 1 Adhesive spreader - 2 Carpet Templates

SUPERIOR VISIBILITY - When it comes to visibility and safety, more is better. With a total of 34 powerful LEDs, an internal chrome reflector to maximize light output, and high visibility reflective lenses, these tail lights don't settle for less.

WATERPROOF & DOT APPROVED - Built with epoxy encased electronics and a sonically sealed body to prevent water intrusion, our lights have earned their DOT certification and IP67 rating.

ONE AND DONE - Combining turn signals, brake lights, tail lights, a license plate light, side marker lights, and reflectors, into one unit, these lights meet all of the rear light requirements of DOT FMVSS-108 for trailers less than 80" wide.

【HEAVY DUTY 】These dust caps are made of high quality carbon steel and rubber, surface zinc plated, strong and durable, not easy to deform, corrode or rust.

【WITH EXTRA 2 SEALS】 2 caps meet your daily use and extra 2 seals will be a reserve in case you get into trouble.

【DIMENSION】OD: 1.98 inch/ 50.4 mm.Please check the size information and compatibility carefully before placing an order.

Perfect for backing up or maneuvering your trailer, can replace factory silver key 34557; compatible with A60, A70 actuator. Intended for off road use and boat yard use only. Remember to remove the key while towing (forward motion) to ensure trailer brakes are active

Premium Quality & Design, Highly visible bright orange lock key with short webbing loop, so you can see it from a distance whether it is still on the trailer or truck, so you won't forget to remove it.

Easy to Install: Compared to the silver brake lock key, the lock key is easier to install on the trailer without the tape and C-clamp.

2PK 2''x4' Transom Tie Downs; Rated Capacity: 1200 lb/544 kg Safe Working Load: 400 lb/181 kg

Quick-release (Over-Center) buckle, strong and secure, yet easy to use and quick tightening

2-Inch-wide webbing, resists rot, oils, gasoline and most chemicals