Best Dirty Dingo Motorsports in 2026

Powder coated black texture

Laser cut

1,000 lb capacity

SBC to LS

BBC to LS

For installing 1997-2015 Gen III/IV LS series engine

Powder coated

Fits Sanden SD7B10 Compressor

Passenger Side Low Mount

Powder coated black texture

Laser cut

1,000 lb capacity

DESIGN & APPLICATION: Designed to support vehicle components only and ideal for applications completed “waist and chest high” on a two-post vehicle lift.

EASY TURNING & HEIGHT ADJUSTMENTS: Bearing mounted spin handle and self-locking Acme threaded screw provide easy turning and height adjustment under load.

STABILITY: The 12” diameter base provides extra stability.

DESIGN & APPLICATION: Designed to support vehicle components only and ideal for applications completed “waist and chest high” on a two-post vehicle lift.

EASY TURNING & HEIGHT ADJUSTMENTS: Bearing mounted spin handle and self-locking Acme threaded screw provide easy turning and height adjustment under load.

STABILITY: The 12” diameter base provides extra stability.

💪ENGINE LIFT BRACKET - 7100 Lifting Bracket Set Engine Lifting Bracket Can Be Used to Lift Engines or Other Heavy Parts, and Help Transform Heavy Equipment and Engines, They Are Ideal Tools for Workshops and Garages

💪INGENIOUS DESIGN AND USE - The Engine Support Bar Can Be Directly Bolted to the Lifted Part. This Component Should Be Used with Load Levelers and Lifting Slings to Assist in Lifting Most Engines and Heavy Parts. It Can Also Be Used for Other Purposes.

💪QUALITY METAL MATERIAL - The Lifting Bracket Kit is Made of Quality Steel Material, Strong and Durable.

Don't Let Your Expensive Engine To Fall Off The Stand And Get Damaged

Compatible With All Chevy Small and Big Block, LS LT Engines

Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum

Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs

Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations

Features (4) 14" length chains, each equipped with an L-bracket assembly

HEAVY DUTY STEEL CONSTRUCTION with 750 lbs capacity

STORAGE HARDWARE INCLUDED so you will always have the needed bolts

INCLUDES 3” STEEL CASTERS that swivel 360-degrees for easy maneuverability

𝗘𝗡𝗚𝗜𝗡𝗘 & 𝗧𝗥𝗔𝗡𝗦𝗠𝗜𝗦𝗦𝗜𝗢𝗡 𝗦𝗪𝗔𝗣: Our hoist sling can handle a 2000 lb. capacity and has a 3-to-1 safety rating (tested to 6,000 lbs.) Mounting cleats fasten to any engine allowing for quick and easy engine AND transmission swaps!

𝗧𝗜𝗟𝗧 𝗔𝗖𝗧𝗜𝗢𝗡: The Oberg Tilt Lift Engine Sling allows you to progressively tilt and lift the engine up to 45 degrees in either direction.

𝗟𝗢𝗖𝗞𝗜𝗡𝗚 𝗧𝗔𝗕: Our hoist sling comes with lever locks that hold into place at exact angles needed to lift or lower your engine in as little as 1/4" increments, using a 1/2" ratchet or breaker bar. This makes it easy for one-handed adjustment!

💪ENGINE LIFT BRACKET - 7100 Lifting Bracket Set Engine Lifting Bracket Can Be Used to Lift Engines or Other Heavy Parts, and Help Transform Heavy Equipment and Engines, They Are Ideal Tools for Workshops and Garages.

💪INGENIOUS DESIGN AND USE - The Engine Support Bar Can Be Directly Bolted to the Lifted Part. This Component Should Be Used with Load Levelers and Lifting Slings to Assist in Lifting Most Engines and Heavy Parts. It Can Also Be Used for Other Purposes.

💪QUALITY METAL MATERIAL - The Lifting Bracket Kit is Made of Quality Steel Material, Strong and Durable.

Engineered to fit all GM LSx engines

Manufactured with high quality 1" x 2" steel tubing for rigidity

Supports complete engines as well as engines with an attached transmission

Product 1: Rotating engine stand is constructed with heavy-duty steel, providing long term durability with an industrial luster; An extra-wide base provides maximum stability

Product 1: Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine; Securely holds most foreign and domestic engine blocks

Product 1: Engine stand features a 3/4 ton (1,500 lb) load capacity and is equipped with (2) fixed casters and (3) 360-degree swivel casters for smooth maneuverability

Rotating engine stand is constructed with heavy-duty steel, providing long term durability with an industrial luster; An extra-wide base provides maximum stability

Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine; Securely holds most foreign and domestic engine blocks

Engine stand features a 3/4 ton (1,500 lb) load capacity and is equipped with (2) fixed casters and (3) 360-degree swivel casters for smooth maneuverability

【1,100Lbs Weight Capacity】This engine support bar has a 1,100 pounds capacity and it weighs 32Lbs.

【Durable Construction】The main construction is made of heavy duty steel with powder coat paint finish which ensures long term durability. The end of the long handle is made of plastic which make it more comfortable to use.

【6 Sizes of Punches to Choose】It has 6 dies and punches of different sizes to meet different needs for different engine sizes.

Excellent quality: Copper (T-2)

Length : 11.8 inches

High quality pure copper material, durable to use.

STURDY & DURABLE - The SPECSTAR engine support bar is made of high-quality steel with a protective powder-coated finish, which is in high rigidity and wear-resistant; The heavy duty materials are reliable that can decrease the loss and ensure safe operation and prolonged usage

STRONG LOAD CAPACITY - This transverse bar can carry up to 1100 lbs. that is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on; It can precisely locate and support the engine, making repair and clean become easier

ACCURATE FINE-TUNING HEIGHT - The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.9 inches, and it is available to maintain altitude for a long time; Equipped with a knob and stable triangular base on each side, the range between the 2 bases can also be changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch

Can be used with almost all vertical-type single cylinder 2- or 4-stroke motorcycle engines (will not work with lay-down engines/ horizontal cylinders)

PREMIUM QUALITY STRUCTURAL STEEL: Made from rugged top quality structural steel, this 2-ton engine hoist is durable, sturdy, and ready to take on the toughest projects inside the garage.

HEAVY-DUTY FOR JOBS UP TO 2 TONS: This garage hoist is built to handle the most heavy-duty jobs. From small engines up to a load capacity of 2 tons, the sturdy chains will keep your engine balanced and intact.

EASY TO USE CRANKSHAFT: Easy to mount and even easier to use. Perfect to use as a reliable shop crane or in your home garage for that classic Shelby you’ve been working on for months. Simply attach the chains to the engine, crank the threaded shaft, and balance the load with ease.

ROTATE YOUR ENGINE to any position for low and top end engine assembly and disassembly

HEAVY GAUGE SQUARE STEEL TUBE CONSTRUCTION disassembles effortlessly for storage or transport

CONVENIENT ball-bearing swivel casters allow you to move the stand around the work area with ease

Rolling engine cradle stand is engineered to fit small block and big block Chevy engines

Built in hardware storage for engine mount bolts while stand is not in use ensures you will always have the proper hardware when needed

Premium steel construction for superior strength and maximum hold

HEAVY DUTY: 1, 500 lb. working load capacity accommodates most engines.

SUPPORT CHAINS: Two chains at each end support the load and help to transfer the weight safely.

ONE HANDED CRANK: Allows you to easily reposition and redistribute the load.

【1100LBS LOAD CAPACITY】- Holding capacity: 1100 lbs. This engine support bar can precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.

【HEIGHT ADJUSTABLE】- The maximum lifting height of the engine transverse bar is 7.87 inches for easy repair and clean the engine. Turn the handle to raise or lower the motor at the proper height according to your requirements.

【TWO TRIANGLE SUPPORTS】 - Two black triangular supports on the beam are adjustable. You can place them in the appropriate position. The width of the beam is 59.06 inches, so the engine support bar is suitable for vehicles with a width of fewer than 59.06 inches.

MECHANIC'S BEST FRIEND - The VIVOHOME Heavy-Duty Hoist Load Leveler allows for easy engine handling and positioning; It attaches between the engine block and the crane to let you lift the engine safely and easily; With this handy tool, reinsertion of motor and transmission will also be perfectly balanced

HEAVY-DUTY MATERIALS - Made with high-quality steel that is highly resistant to wear and corrosion, it ensures safe operation and prolonged service life; The maximum lifting capacity of 4000 lbs. provides you with enough power to lift a variety of engines or other heavy items

EXCELLENT SUPPORT CHAINS - Designed to easily attach to the engine, 2 supporting chains offer added strength and allow for accommodating engines of different sizes; They help share the heavy load and keep the engine steady so that it won’t sway or fall off during the process

Sturdy design prevents tipping

Front swivel castors

Allows you to easily move and position the engine

Constructed with heavy-duty steel, coated red and black finish on the surface, providing long term durability with an industrial luster

Built-in steel tray helps you to keep essential tools and parts nearby and organized

The weight capacity of this engine stand is up to 5/8 ton (1,250 lb),which can securely holds most foreign and domestic engine blocks

Rotating engine stand is constructed with heavy-duty steel, providing long term durability with an industrial luster; An extra-wide base provides maximum stability

Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine; Securely holds most foreign and domestic engine blocks

Engine stand features a 3/4 ton (1,500 lb) load capacity and is equipped with (2) fixed casters and (3) 360-degree swivel casters for smooth maneuverability

NEAR UNIVERSAL ENGINE SUPPORT: Good for engine and transmission repairs on nearly any passenger vehicle; Holding capacity: 1, 100 lbs. / 500 Kg.

ENGINE OR TRANSMISSION REPAIRS: Precisely positions and supports engine while working on the transmission, or holds transmission in place while removing engine for rebuilding

ADJUSTABLE MOTOR SUPPORT: The threaded chain hooks and the position of support feet adjust to fit all automobiles

Move boat engines up to 15 HP and 85 lbs for maintenance and repairs

Solid wood hanger block

Includes large flat-free wheels