Best Ecuobd in 2026

Keeps your car in full cylinder mode all the time, no more shuddering or dropping cylinders.

Compatible with V6 / V8 General Motors (GM) active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.

No installation required, simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM/ DFM system.

Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.

Works with engine off and pulse timer may be used with fuel pressure gauge.

Large LED display/4 Pulse Modes. Test Lead: 41. 5cm / 16. 3 inches.

Best tool to use when removing filters from fuel injectors and performing rebuild.

Remove Any type of Top of Side Feed Fuel Injector Filter

Easily Screws into the Basket Filter and Removes it by Turning the Tool Knob

AFM/DFM Disabler keeps you in full power 100% of the time. Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system

Leaves no Trace - Unplug it to return to factory settings. This AFM Disabler does not reprogram your factory ECU. Full power delivery all the time without factory warranty concerns

Fits all V6 & V8 General Motors (GM) active or dynamic fuel management vehicles, includes cars, trucks & SUVs

Feature: 1.Stable characteristics, high reliability. 2. Easy installation and replacement. 3.Molding make, Perfect match for the original car.

Length: 83cm (32.6 inch), 23cm (9 inch) Package included : 1 set Air Injection Pump Hose (2pcs)

Manufacturer Part Number: 8L0 133 817, 06A 133 817 Q

Save Time and Money -This Job Can Be Done with The Cylinder Heads On

Small - Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine

High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available

(2) CONNECTOR ORINGS

(2) INJECTOR BODY ORINGS

(1) COPPER GASKET

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

[COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters.

[PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal.

Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm)

Keeps your car in full cylinder mode all the time, no more shuddering or dropping cylinders.

Compatible with V6 / V8 General Motors (GM) active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.

No installation required, simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM/ DFM system.

【HIGH QUALITY】Long life-span matters, that is why our injector o-ring kit are made from wear resistance rubber to ensure it can work a long time

【PREMIUM QUALITY】Fuel Injector sleeve removal kit is made of strong and tough quality materials, which enhance the durability and superior reliability

【FITMENT】Removal tool & install kit replacement for 1994-2003 Ford 7.3 Powerstroke丨Navistar T444E, DT466E丨Caterpillar 3126 3126B 3126E Diesel Engines丨F-Series丨E-Series丨Excursion

This injector clean kit includes many different adapters, thus covering almost all the EU, Asia, USA cars and light trucks.

The system not only features with high and low pressure cleaning function. At the same time it could also clean the whole fuel system including throttle valve, fuel nozzle and combustion chamber.

Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast-connection and anti-friction oil tubes for all cleaning fluid， clean liquid is not included in the package.

Sniper Self-Tuning Shiny Throttle...

3.5" Touch...

Fuel System Kit For Troubleshooting Tips setting up your New Holley Sniper EFI System, please see this helpful video from Holley...

Matches OE form, fit and function

Made with high quality material and componentry

High quality construction for durability

➤REPLACEMENT FOR : It can Replacement For Volkswagen Eos Tiguan GTI CC Passat Beetle Jetta Audi A3 A4 Q5 A6 A6 Quattro

➤SUPERSEDED PART NUMBER:06H998907A ,06H 998 907,06 H 998 907A,06H998907A,06G 998 907,06G998907,06J 998 907,06J 998 907,06J 998 907A,06J998907A

➤HIGH-QUALITY MATERIALS：Perfect Performanc.Easy Installation.High Reliability.We use high-quality rubber O-rings It can improve the performance, and easy to install, high reliability Our Products are 100% Perfect Match for the Original Car.

FITMENT - 6pcs 4 Holes Fuel injectors set for 2001 2002 2003 2004 2005 Ford Taurus 3.0 v6,2001 2002 2003 Ford Ranger 3.0 v6,2001 2002 2003 2004 2005 Mercury Sable 3.0 v6,2001 2002 2003 Mazda B3000 3.0 v6 compatible with 1F1Z9F593DA

PREMIUM FUEL INJECTORS - Smaller fuel atomized particles improve engine fuel economy; Additional fuel filter removes impurities, optimizes engine performance, stops vehicle vibration and accelerates more smoothly

LONGER LIFE - New, upgraded fuel injector made of environmentally friendly metal and composite plastic, protected from fuel, minimizing "sticking" in use, resisting wear and corrosion and extending service life

【Function】- Calibration Tool Compatible with Detroit 50 & 60 series engines.

【Applications】- Similar to J-1242/J-1853/J-35637-A/J-39697/J-42665/J-42749/J-45002.

【Specifications】- 78.2mm, series: 60, engine: 1986-1993 DDEC I; 78.2mm, series: 60 and 50, engine: 1986-1993 DDEC II; 78.8mm, series: 60 and 50, engine: 1994-1997 DDEC III; 80.3mm, series: 60, engine: DDEC III at the end of 1997; 80.3mm,Series: 60 and 50, Engine: 1997-1998 DDEC IV; 81.0mm, Series: 60 and 50, Engine: 1998-1999 DDEC IV; 81.0mm, series: 60, engine: 2000-2003 Marine; 82.1mm, series: 60.

Bright dip, black anodized finish with laser etched EFI logo for long lasting good looks

5/8” diameter fuel passage provides the flow capacity for high horsepower applications

Fuel rails are machined to accept -8 (3/4-16) O-ring fittings

[COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.

[PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal,1 micro filter removal tool.

[DIMENSION] Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm), 1pcs x Removal tool - (105 mm).

Brand New Holley Sniper EFI Self-Tuning Kit - Black Ceramic Finish, 4 Barrel Fuel Injection Conversion - Self Tuning Kit plus Handheld EFI Monitor. (Part #550-511)

Holley just brought EFI within range! Introducing Sniper EFI! It's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!

Specs: CFM: 800 | Coast Guard Approved: Yes | Finish: Black | Flange Style: Dual Bolt Pattern | Fuel Pressure: 58.5 PSI | Height: 3.28" | Injector Size: 100 lb./hr @58.5 PSI

√【Replace Part Number 】: Replace MA558-465, 558-465, TERMX-Y6, TERMX-Y-6

√【Compatible with 】: Holley EFI Sniper Terminator X Dominator

√【High-quality 】:Shielded 4 wire.When Updating Your ECU Firmware, You Must Unplug The CAN Splitter From Main Harness，and plug the device updating the ECU Firmware Directly Into The Main Harness.

Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine

Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda

Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer

AFM/DFM Disabler Compatibles with most V6 & V8 GM Motors.

Keep your V6 or V8 GM motors to run in full cylinder mode at all times.

Just plug it into your vehicle's OBD-II port and it will immediately start working to eliminate the AFM/DFM system.

Recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability

Manufactured to GM OE specification for fit, form, and function

Brand New Holley Sniper EFI Self-Tuning Master Kit, Shiny Finish Holley Sniper 4 Barrel Fuel Injection Conversion - Self-Tuning Master Kit plus Handheld EFI Monitor (Part #550-510K)

Holley just brought EFI within range, introducing Sniper EFI master kits! It's economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride! Perfect for street rods, muscle cars, off road trucks or nearly any carbureted vehicle. The Sniper EFI master kit contains the most complete EFI fuel system on the market.

Everything is included to completely plumb your fuel system including; 20 feet of 3/8" EFI Hose, in-line fuel pump, post and pre fuel filters, return bulkhead, and all of the necessary fittings and hardware. Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today!

Brand New Holley Sniper EFI BBD Master Kit, Shiny Finish, Holley Sniper 2 Barrel Fuel Injection Conversion (Part #550-858K)

Introducing the Sniper EFI BBD Master Kit, for Jeep CJ's! The Sniper EFI BBD will be right at home on any 258ci powered trail rig, or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding.

Upgrade to Sniper EFI and get the tactical accuracy of EFI today! This master kit includes 20" of fuel hose, two filters, one high pressure EFI fuel pump, and all of the required fittings for a complete EFI fuel system conversion!

Brand New Holley Super Sniper EFI 4150 650 HP Forced Induction Sniper EFI 4 Barrel Fuel Injection Conversion, Self-Tuning Kit & Handheld EFI Monitor, Classic Gold (Holley Part #550-520)

Specs: Brand: Holley Sniper EFI | CFM: 800 | Emission Code: 3 | Finish: Classic Gold | Height: 3.28" | Injector Size: 100 lbs./Hr at 58.5 PSI | Inlet/Outlet Size: 9/16-18 Female O-Ring (AN 6) | MAP Sensor: 2.5 Bar | Max Horsepower Rating: 650 Forced Induction | Product Type: Sniper 4BBL TBI Kits | Transmission: 700R4/200R4, TH350

Introducing Holley Super Sniper EFI! Looking to convert your blow thru carbureted turbo engine to EFI? Look no further. Holley offers a 650 HP four injector version for lower horsepower applications with a power adder or someone just needing additional sensor inputs. Did we mention the Super Sniper also has full nitrous control built-in?

【Multi-functional Fuel Injector Cleaner Kit】The fuel injector cleaner kit features high and low-pressure cleaning function for the whole fuel system, including throttle valve, fuel nozzle, TWC, intake manifold and exhaust pipe, etc. It can quickly and completely remove carbon deposits in about 20 minutes, efficiently restoring the vehicle's power and driving performance, and greatly reducing fuel consumption and exhaust emissions.

【Easy Operation】The non-disassembled fuel injector cleaner kit has a special handling check valve for releasing gas and adding liquid. Adjustable pressure gauge up to 150PSI. The injector cleaning kit is made of high pressure quality stainless steel, scratch and corrosion resistant, safe and reliable. Cleaner canister capacity up to 1000ml to ensure pour enough fuel injector cleaner. NOTE：This fuel injector cleaner kit does not contain cleaning fluid. It is only suitable for gasoline injectors, not for diesel injectors.

【Complete Adapters for Widely Applications】The fuel injector cleaning kit includes a variety of different adapters, which can be used in almost all European Union, Asian, American cars and light trucks. Its main components and joints are made of brass, and the connecting tube is made of high quality rubber material, which has strong toughness and corrosion resistance, and the structure is more stable without oil leakage. The oil tubes are suitable for all cleaning fluid.

Package includes: Fuel Injector Kit with Retaining Bracket & Screw.

Fitment : for Chevy C2500/C3500, Express 2500/3500, K1500/K2500,Suburban C2500/K1500/K2500; GMC C1500/C2500, K1500/K2500/K3500, Savana 1500/2500, Suburban C1500/K2500, Yukon. (For detailed models, please refer to the product description).

Function :It has a central pump and six thin tubes connected to it. Atomizes fuel into the engine's intake manifold or cylinders, as part of the fuel and engine management system, reduce pollution and increase the performance of your car. Allows for a quick throttle response. Assists in cold engine starts.