Best Ez Stud Out in 2026

Compatible with Ford 4.6L/5.4L/6.8L 2v, 5.4L/6.8L 3v, Ford Small Block, Ford 6.0L/6.4L, Ford 7.3L

EZ Stud Out allows you to quickly replace broken studs with no drilling or tapping

Master Kit comes with 5 plates, 25 EZ Stud Out Thin Nuts, carbide burr and a rugged and durable plastic case

SAVE TIME, FRUSTRATION AND MONEY -There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 fastener remover to facilitate your needs when repairing.

PREMIUM GRADE NYLON -This tool set made of impacted resistant nylon fiber material with high level craftsmanship, tougher than common nylon one, it’ s non-toxic and eco-friendly designed.

ERGONOMIC DESIGN - GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming.

【For Car DIYers And Beginners】This plug-and-play Autel scanner MS300 can pay for itself in the first use. It communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly (no battery needed). It capable of scanning vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy should be a member of your toolbox, always in your car and ready to be taken out and used.

【Read Codes & Clear Codes In Seconds】Getting diagnostic codes(DTCs) should be the start of all repairs if you don't want to be ripped off. You can use MS300 to read the codes in seconds and look them up to quickly locate the problem areas, then determine if you can do the repair yourself or go to a mechanic, and clear the codes to get everything back to normal.

【Turn Off Check Engine Light】The check engine light is always annoying you, most of the time because of a little thing, isn't it? Maybe it's just a gas cap that's not tightened but you paid hundreds of dollars for it? With Autel MS300 scan tool, you can read code to quickly find out why the check engine light is on and reset it.

This tool separates the rubber supports from exhaust hanger brackets.

The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

A simple way to expand a warped manifold so all bolt holes are accurately aligned

Helps prevent cross-threading of manifold bolts

Works best when used in pairs or install before removing manifold to prevent misalignment

Heavy Duty Durability - Made of No.65 Manganese Steel bar, it's much tougher than common carbon steel pliers,

Ergonomic Design - Poly Propylene Ethylene (PPE) handle, anti-skid and no grinding to hands, comfortable handheld for a breeze removal of staples, plastic bolts, door panels, dashboard and other upholstery

Effective Effort Saving - Adopts Labor-saving Lever and Spring loaded design of the plier with 5.5" long handle, simply get all stubborn clips removed without damage, A Real Time and Effort Saver!

No longer do you need to fight trying to install this fragile exhaust seal

Never worry about an exhaust leak again

Can be used with exhaust flange nuts, sold separately.

Stretches Pipe up to 4-1/4" Including Stainless Steel.

Use with an impact wrench to quickly stretch pipes.

Collet sets expand pipes from 1-5/8" to 4-1/4".

Rounds pipes in or out

Come in box

Range is 1 1/2" - 3 5/8" (38.1 - 92mm)

Applicable Engine : Four-cylinder EA888 petrols: 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI. compatible with VAG series 2006-2018 TSI, TFSI EA888 engine(1.8L, 2.0L).Engine Code: BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB

Applicable Vehicle: Replace OEM: T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40098, T40267, T40271. Compatible with VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC. Compatible with Audi A3 A4 A5 A6 Q5 TT/ TT Quattro 2.0T

More Tool: This timing tool kit have 23pc, used for correct the camshaft and crankshaft timing position, include camshaft intake and exhaust adjusting tool, had everything you needed to do a timing chain replacement, also is a must tool for timing chain replacement job, 23pc complete tools let you more efficient

Function：This tool separates the rubber supports from exhaust hanger brackets.

Applicable models：This tool is suitable for all imported and family car and truck exhaust systems supported by rubber hangers.（Works on all vehicles with rubber exhaust hangers.）

Operation The：operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

For removal of rubber exhaust system hangers (i. e. tailpipe, exhaust piper and muffler)

Self- locating forcing pin

Cushioned slip-resistant handles at a 25 degree offset for easy access in restricted areas

SPECIFICATIONS Our Exhaust Hanger Removal Pliers are designed to separate rubber supports from exhaust hanger brackets with 25 degree offset handles for work in hard to reach areas.

DESIGN CONSIDERATIONS: The 25 degree offset handles feature slip-resistant comfort grips, so all you have to do is squeeze to remove a rubber support from an exhaust hanger. Thanks to the self-locating forcing pin, it's even easier to apply the pressure you need.

COMMON APPLICATIONS: These Exhaust Hanger Removal Pliers are designed to work on all import and domestic car and truck exhaust systems that use hanger supports and are great for work on tailpipes, mufflers, and more.

▲ 𝐅𝐈𝐓𝐌𝐄𝐍𝐓- Driver's Side Rearmost Bolt, Passenger Side Frontmost Bolt;For 1999 & Newer GM Trucks & SUV's With a 4.8, 5.3, 6.0 or 6.2 L.engine size.(Fits these GM Vehicles:Silverado, Sierra, Yukon, Denali, Escalade, Hummer )

▲ 𝐍𝐎 𝐍𝐄𝐄𝐃 𝐓𝐎 𝐑𝐄𝐌𝐎𝐕𝐄 𝐁𝐑𝐎𝐊𝐄𝐍 𝐁𝐎𝐋𝐓𝐒 - Bracket replaces broken exhaust manifold bolts and clamps the exhaust manifold down securely to the cylinder head to eliminate exhaust leaks. It is NOT necessary to remove the cylinder head or drill out the broken bolts!

▲ 𝐇𝐈𝐆𝐇 𝐐𝐔𝐀𝐋𝐈𝐓𝐘 - 100% brand new and high quality, It is easy to install and uses high-quality materials that meet or exceed OEM standards. Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold

Impact driven Heavy-Duty expander allows for fitting smaller exhaust piping and making exhaust seals

28mm size bolt head drives the tool and collet sets to expand pipes from 1-5/8" to 4-1/4"

Apply included grease to threads before use, impact wrenches rated for 800 ft-lbs tightening and above recommended to do most jobs

CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters; Keep well oiled, not for use on stainless steel

EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm); Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item

EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps; Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut

Cut pipes 3/4 to 3" and 19mm to 76mm in diameter"

Fifteen blades effectively cut pipe so only a 100 degree rotation is needed for a complete cut

Serviceable tool works in hard-to-reach areas

SPECIFICATIONS: Our Exhaust Pipe Cutter is designed to cut 3/4-inch to 3 1/4-inch tailpipes and exhaust pipes and features a cutting wheel blade on each of its 15 rollers.

DESIGN: Made of Chrome Molybdenum Steel, the adjustable chain uses up to all fifteen of its blade wheels to quickly and easily cut pipes. Thanks to its low-profile design, this tool is suitable for both on-vehicle and off-vehicle use, and with its ergonomically designed cushioned handles, you'll be able to maintain a safe and comfortable grip while cutting.

COMMON APPLICATIONS: This exhaust pipe cutter is perfect for work in tight and confined spaces and can be used on-vehicle for ultimate convenience, but works just as well off-vehicle for better leverage. If you're working on a tailpipe or exhaust pipe between 3/4-inches and 3 1/4 inches in diameter, this exhaust pipe cutter is right for you.

CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters; Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness

ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas; Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts

DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic; Each exhaust tube cutter wrench tool features 15 cutter blade wheels

AUTO PIPE EXPANSION KIT: This mechanic’s tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops.

WIDE EXPANDING RANGE: The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet.

EASY OPERATION: Choose the proper collet, clamp the pipe, and then expand the pipe—operation of our stretcher kit is really that simple! Use a 1/2" or 3/4" impact wrench to save even more effort. Our helpful user manual is included to guide you through the process.

Fit: 49cc 60cc 66cc 80cc 2-Stroke Engine Motor Motorized Bicycles Motorized Bike

Package Includes: 1*Muffler Exhaust+1* gasket

Hole distance: 40mm

To make safety and quick work on cutting exhaust pipe, SMOTIVEPRO Automotive Tool exhaust pipes and tailpipe cutter is simply the best solution for you. NOT FOR USE ON STAINLESS STEEL OR DOUBLE-WALL PIPES.

This item features a cutting wheel on each of the rollers for smooth tracking and a cushioned grip handle for comfort,besides muffler pipe cutter minimizes noise. With the unique design, you won't have to remove the exhaust from the car for cutting.

The Tailpipe Cutter is a very useful tool designed especially for both on and off the car cutting of tailpipes and exhaust pipes with diameters ranging from 3/4 inch to 3 inch (19-76 mm). Each roller has a cutting wheel that provides smooth tracking.

For expanding and reshaping exhaust pipe ends and junctions

Heavy duty steel construction

17mm hex shaft for use with a socket and ratchet

SPECIALTY TOOL: The Small Tailpipe Expander Set expands exhaust pipes, rounds pipe ends, and removes exhaust clamp grooves

WORKS ON: The small expander works on pipes with internal diameters of 1-1/8 inch to 1-3/4 inch

EASY TO USE: The tailpipe expander is simple to adjust to get the correct diameter, set the lock nut and place the clip, then use a ratchet to turn the heavy duty hexed bar

* Small expander 1-1/8" to 1-3/4", medium expander 1-1/2" to 2-1/2", large expander 2-1/8" to 3-1/2"

* Drop forged, heat-treated steel 

* Designed to quickly and easily straighten out clamp dents in mufflers

Compatible with Cummins ISX Engines. Alternative to 3163530 Jake Brake Tool (7mm) feeler gauge.

Material：Advanced heavy duty steel process and black non-slip PVC coated handle, durability and anti-corrosion. High precision and hardness to provide a much longer service life.

Fast, easy and accurate way to check the valve clearance with this feeler gauge. Getting the clearance adjusted is crucial not only for great performance but also to avoid any unwanted catastrophic failures or engine blows.

【STRONG APPLICABILITY】The exhaust hangers tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

【MORE CONVENIENT】 This rubber bracket exhaust pliers, with support points and removal holes.The operator simply squeezes the pliers handles to force the rubber.The exhaust hanger makes it easier to remove the rubber bracket from the exhaust hangers, saving time and effort.

【MATERIAL & SIZE】Exhaust Rubber Hangers made of quality impact grade steel material.Size:30*7.5cm /11.81*2.95 inch.

This Pipe Expander Muffler Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.

This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks.

Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence.

For use on GM small-block V8's

Spreads warped manifolds so bolt holes line up correctly

Should be used in pairs, place spreader between manifold flanges

FUNCTION 🚗: Impact driven Heavy-Duty expander allows for fitting smaller exhaust piping and making exhaust seals.

SIZE 🚗: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet.

UPGRADE 🚗: Many users tell us that the rubber ring is easily damaged during use. We upgraded the rubber rings on the Collet to three, and added a pack of spare rubber rings for maximum longevity.