Best Germer in 2026

100% brand new and high in quality

It can change the rotation direction of servo. Just install it in series in servo channel

High precision PCB ensures stable performance and excellent function

【LIGHTWEIGHT】Very good mechanical properties, light weight and superior quality. Adopting exquisite workmanship, beautiful appearance design, providing you great using experience.

【ADJUSTABLE】The windsurfing mast extension rod can be extended by 0-35cm, which is convenient and practical, and the length can be increased enough to meet your use needs.

【HIGH STRENGTH】High strength, sturdy and durable, corrosion resistance, durable. This windsurfing mast extension rod is common to SDM standard mast, please pay attention to the use.

▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof

▶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V

▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell

High performance standard digital servo

Torque 500 OZ / Speed 0.100sec @ 7.4V

Torque 565 OZ / Speed 0.085sec @ 8.4V

20kg High Torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

Fully sealed waterproof rubber seal ring, can effectively resist moisture.

Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.

1. USES: Main Parts for Vehicles & Remote Control Toys

2. Performance:： Stable High performance digital standard servo

3. quality :High-precision metal gears with hard anodizing

▶New Model: DS3225MG More torque higher speed

▶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm

▶Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V.

Aluminium Case and full metal gear enhance the heat dissipation, ensure that servo motor can work well

Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.

High precision RC Servo -- Upgraded version digital servo for RC model.

Large torque -- Maximum torque of this RC Servo can up to 26kg/cm. (6V)

Good Quality -- Made of high quality material, reinforced metal gears, stable and low-noise.

Upgrade version: programmable, 8.4V high voltage application

Stall Torque: 3.8 kg-cm (52.77 oz-in)  @ 6.0V; 4.5 kg-cm (63 oz-in) @ 8.4V

Operating Speed: 0.13sec/60° @ 6.0V; 0.10sec/60° @ 8.4V

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor.

【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction.

【Angle】Stall Torque: 2.0kg/cm(4.8V); Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180.

20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

Full metal gear. it's better for accuracy, service life has been greatly increased

Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well

Specification ： Size: 40x20x40.50mm ；Weight: 75g(without servo horn) ；Motor Type: Brushless Motor

Waterproof IP67 Servo: Excellent waterproof performance, can adapt to Rainy day and Play in a Humid

High Torque ：Torque/Speed: 18kg-cm/0.06sec/60°6V; 25kg-cm/0.04sec/60°8.4V

The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).

MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.

MG996R servo torque is 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.15s/60 degrees. Recommended voltage: 5V, current use: 3A.

SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of RC Toys and also make electronics DIY compatible with Arduino, Raspberry Pi

Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.

Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum angle: 120°

Servo case/gaskets

For 2056 and 2075 waterproof servos

Includes exploded view sheet

Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments

High Torque Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/cm@8.4V,controllable angle range from 0 to 180 degrees

Full Metal Gear Steering Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control

Combines leading edge technology with super high 12 bit (4096) resolution

Coreless motor provides high speed, incredible efficiency, and low power consumption

Extremely strong steel gears ensure long-life and durability

PERFECT Upgrade Steering / Throttle Servo For Almost Any 1/10-1/8 Car, Truck Or Buggy.

DEAD BAND: 2us 1520us/330hz / MOTOR: High Quality Core Motor

SPEED (4.8v): 0.09sec 60deg / SPEED (6.0v): 0.07sec 60deg

High Touque Servo：This 35kg RC servo maximum torque is up to 35 kg/cm@7.4V high torque, Compatible with servo RC for 1/10 1/8 1/12 RC Car

Metal Gear Steering Servo：Equipped with full CNC aluminum case and stainless steel Gear servo for RC car,less noise, light weight, higher operating accuracy

Waterproof Servo：Waterproof performance IP67. Controllable angle range from 0 to 180 degree, Excellent linearity, precision control

RC Brushless Servo:This 35kg rc steering servo uses all CNC Aluminum case has stronger anti-collision performance,full metal gear rc servo is more durable,prevent tooth sweeping

High Torque Servo:This 35KG servo is high precision and accuracy,low noise,IP67 waterproof,dust-proof.The max torque of this rc car servo is up to 35 kg/cm @ 8.4V and this rc 1/10 high speed servo speed up to 0.07sec/60°@ 8.4V

IP67 Waterproof Servo: When your rc crawler cross the mountains and pass the charming stream,the rc servo 1/10 has IP67 grade Waterproof performance can prevent it from humid environment or rainy day

High Torque Servo：Betu 35kg Servo's maximum torque is up to 35 kg/cm@7V, the steering servo Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.

Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control.

All metal servo: Equipped with full aluminum case and stainless steel Gear, higher operating accuracy, less noise, light weight.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!

This product is made from high quality materials, and designed for lasting performance.

This is for use on Traxxas 2018 Servo, consult your user's manual for exact parts listings.

Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles

This product is made from high quality materials and designed for lasting performance

This is for use on RC vehicles, consult your user's manual for exact parts listings

High torque servo： 46kg brushless servo's maximum torque is up to 46kg/cm@8.4V, high torque, compatible with 1/5，1/6, 1/8, 1/10, 1/12 RC Car / Robot / Boat.

Waterpoof servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, excellent linearity, precision control.

All metal servo: Equipped with full aluminum case and stainless steel gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.All metal servo: Equipped with full aluminum case and stainless steel gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy.

High Torque Servo:Sincecam Brushless RC Servo,55kg Digital High Torque Servo Motor,Can Reach the Maximum Torque of 58kg-cm(805oz-in)@8.4V,Speed up to 0.12sec/60°@8.4V,Ultra Fast,Extremely Strong,Low Noise

Waterproof Rc Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Control Angle 180°

Metal Steering Servo:Equipped with Patented Reinforced Steel Oblique Gears,All CNC Aluminum Housing for Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control

1, 4 Cell AA Battery Holder Case is a good option to supply the power for RC models such as for 1/8 1/10 1/16 RC Cars Trucks Crawlers only if it has interface for JR connector, very easy and convenient to use it. AA batteries are not included, you need prepare 4pcs AA Batteries by yourself.

2, 4 Cell AA Battery Holder Case with Servo tester can be widely used to test the RC digital servos which is with JR plug as well, such as for model 9g micro servo, tiny 1.5g linear servo, FS90R servo, DS3225 digital servo, DS3218 digital servo etc.

3, The red wire of the holder is to connect with "+" of "IN" of the servo tester, and black wire is to connect with "-" of "IN". The other side which marked "OUT" is to connect with servo, normally red wire is with "+", black or brown wire is with "-", and the rest wire is with "signal".

Multifunctional servo tester, aluminum shell, durable and lightweight, easy to operate buttons

3 modes to check servos or ESC: Manual mode, Neutral mode, Automatic ''window wiper'' mode

Can connect 1-3 servos simultaneously and test such as 1-3 servos consistency, can also connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos

High Speed & High Torque:The Fastest Speed of This Low Profile Servo is 0.03sec / 60° @8.4V,The Maximum Torque can Reach 18kg-cm (260oz-in) @8.4V,Control Angle 180°.

High Quality & Performance:High Performance Brushless Motor, 32bit Controller and 14bit Four Wire Digital High Precision Magnetically Encoded Angle Sensor Instead of Ordinary Potentiometer, Extremely Accurate and Stable,Never Wears.

Oblique Gear Servo:Equipped with Patented Reinforced Steel Oblique Gears,More Linear and Smooth Torque Transmission,Full Ball Bearings and All Aluminum Case,Enhance Heat Dissipation,Thereby Reducing Power Consumption.

High Speed Servo:37kg RC Servo,Digital High Torque Brushless Motor Servo,Can Reach the Maximum Torque of 37kg-cm(514oz-in)@8.4V,Speed up to 0.07sec/60°@8.4V,Ultra Fast,Extremely Strong,Low Noise

1/10 Waterproof Servo:IP67 Waterproof Design,Dustproof,Servo Can Still Work Normally When Immersed in 1 Meter Deep Water for 30 Minutes,Control Angle 270°.

All Metal Steering Servo:Equipped with Patented Reinforced Steel Oblique Gears,Full CNC Aluminum Housing for Fast Heat Dissipation,Light Weight,All Ball Bearings,Excellent Linearity,Precise Control，7075T6 Metal Servo Horn