Best Horizon Ventures in 2026

4 ft. x 5 ft. Step pad.

Protects your liner from your ladder tearing it.

Comes in blue only.

POOL LINER PROTECTION: Heavy-duty vinyl acts as a barrier to keep your liner safe from ladder scuffing and standard wear-and-tear.

EASY AND SIMPLE: Simply lay on your pool floor surface under your ladder.

STATIONARY: Innovative ribbed base construction ensures that your ladder mat will not float away after installation.

POOL LINER PROTECTION: Heavy-duty vinyl acts as a barrier to keep your liner safe from ladder scuffing and standard wear-and-tear.

EASY AND SIMPLE: Simply lay on your pool floor surface under your ladder.

STATIONARY: Innovative ribbed base construction ensures that your ladder mat will not float away after installation.

POOL LINER PROTECTION: Heavy-duty vinyl acts as a barrier to keep your liner safe from ladder scuffing and standard wear-and-tear.

EASY AND SIMPLE: Simply lay on your pool floor surface under your ladder.

STATIONARY: Innovative ribbed base construction ensures that your ladder mat will not float away after installation.

POOL LINER PROTECTION: Heavy-duty vinyl acts as a barrier to keep your liner safe from ladder scuffing and standard wear-and-tear.

EASY AND SIMPLE: Simply lay on your pool floor surface under your ladder.

STATIONARY: Innovative ribbed base construction ensures that your ladder mat will not float away after installation.

pool liner clips new

Pool ladder for 42" wall height

Coated steel frame

Hi-impact composite steps

RUBBER LADDER BUMPER FOR SWIMMING POOL LADDERS - Protect your pool’s vinyl lining with a reliable rubber bumper that will last for many pool seasons to come. There’s no need to wait to replace cracked, brittle, and loose bumpers! This 1 piece rubber ladder bumper is perfect for emergency repairs and preventive maintenance

2.75” OUTER DIAMETER AND 1.875” INNER DIAMETER - The outer diameter of 2.75 inches is for the wider base of the rubber ladder bumper, while the inner diameter of 1.875 inches is for the interior part that caps into the ladder tubing. A slight taper provides structural integrity and also allows for easy removal as needed

MOLDED RUBBER BUMPER - High-quality, thick, and durable molded white rubber ensures that this pool ladder bumper will be serviceable for longer without cracking, deforming, or loosening. This rubber ladder bumper can withstand changes in temperature, pool water chemicals, and rough handling

FIT: Pool ladder works best on pools with a 36-inch wall height

RECOMMENDED USE: It is recommended that this ladder be used with Quick Set or Frame pools

HEAVY-DUTY: Features durable corrosion-resistant metal frame with heavy duty slip-resistant plastic steps

RUBBER LADDER BUMPER FOR SWIMMING POOL LADDERS - Protect your pool’s vinyl lining with a reliable rubber bumper that will last for many pool seasons to come. There’s no need to wait to replace cracked, brittle, and loose bumpers!

2.25” OUTER DIAMETER AND 1.80” INNER DIAMETER - The outer diameter of 2.25 inches is for the base of the rubber ladder bumper, while the inner diameter of 1.80 inches is for the part that plugs into the pool ladder tubing. A slight taper ensures a snug fit and also allows for easy removal as needed

MOLDED RUBBER BUMPER - High-quality, thick, and durable molded white rubber ensures that this pool ladder bumper will be serviceable for longer without cracking, deforming, or loosening. This rubber ladder bumper can withstand changes in temperature, pool water chemicals, and rough handling

EXTEND POOL LINER LIFE - Prevents excessive stretching and premature wear on above ground pool liners. The underlayment helps eliminate sand from washing away and keeps your vinyl pool liner in place.

FOAM POOL COVE - Made up of durable foam and its designed construction floor protection, plays an important role in owning a swimming pool. The pool cove keeps the weight of the water inside the pool and prevents the liner from ballooning out from under the bottom of the pool wall.

SIDE WALL SWIMMING POOLS - Each piece comes with an adhesive backing. Before you install your pool liner, simply peel and stick each cove to the inside bottom of the pool wall. It doesn't get any easier than that!

STABLE AND STURDY - Much easier than using a standard pool ladder, this in-pool step features double handrails and extra-wide, slip-resistant steps for sturdy support when swimmers are entering or exiting your pool. Two deck mounting brackets offer even greater stability and safety. 350-lb weight capacity.

ANTI-ENTRAPMENT BARRIER - Side panels with spindles were designed to prevent entrapment underwater, meeting all NSPI standards for safety. They also reduce algae build-up by allowing water and chemicals to circulate freely.

FITS MOST POOLS - Created to fit above-ground pools up to 54-in deep with flat bottoms. Mounts easily to any deck with included brackets (hardware not included). Please note: this step should not be used with inflatable or soft-sided pools.

Pool ladder for 48" wall height

Coated steel frame

Hi-impact composite steps

For 48-Inch Wall Height

For 52-Inch Wall Height

With barrier

PROTECT YOUR LINER - This pool liner pad is made from a special cloth fiber that is thick and durable. Defend your liner against cuts and punctures from rocks, roots, glass and other harmful debris found on the ground. It will provide a flat base that gives an extra layer of armor for your swimming pool floor bottom prior to liner installation.

ABOVE GROUND POOL PAD – The liner guard creates a vapor barrier on the bottom of the pool to eliminate water from corroding the metal components for steel-walled above ground swimming pools. It will give your pool floor a subtle layer of cushion and padding, making a soft pool bottom below your feet, while also protecting the liner from potential damage. Also, works ideally when placed on grass or concrete under pop-up pools for an additional protection.

FITS YOUR POOL SIZE – There is no need for tape or additional materials to install this Rhino Pad. It is pre-measured for your specific swimming pool size. If you have a round, oval, or irregular pool size or shape, the liner guard can easily be trimmed to fit your needs.

PROTECT YOUR LINER - This pool liner pad is made from a special cloth fiber that is thick and durable. Defend your liner against cuts and punctures from rocks, roots, glass and other harmful debris found on the ground. It will provide a flat base that gives an extra layer of armor for your swimming pool floor bottom prior to liner installation.

ABOVE GROUND POOL FLOOR PADDING – The liner guard creates a vapor barrier to eliminate water from corroding the metal components for steel-walled above ground swimming pools. It will give your pool floor a subtle layer of cushion and padding, making a soft pool bottom below your feet, while also protecting the liner from potential damage. Also, works ideally when placed on grass or concrete under pop-up pools for an additional protection.

FITS YOUR POOL SIZE – There is no need for tape or additional materials to install this Rhino Pad. It is pre-measured for your specific swimming pool size. If you have a round, oval, or irregular pool size or shape, the liner guard can easily be trimmed to fit your needs.

MEASURE TWICE, BUY ONCE – Whether installing for the first time, or replacing an existing liner, the Waterfall pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Round pool size is determined by measuring from the center point wall to wall in order to obtain the diameter.

PRETTY PLEASING PATTERN - The Waterfall pattern brings nature to your pool with the top border of white water cascading over the edge of a rocky cataract. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees.

NO TROUBLE TO INSTALL - Overlap liners are draped over the walls of the pool during the installation process. Once the bottom seam is even near the cove, the liner is ready to be secured. This material is held in place through the use of coping strips prior to putting the top rails back onto the pool. Bead receivers are not needed for this type of liner. The liner is made to work with pools which have a flat bottom and wall heights of 48” or 52”. ***Will not work with Intex or Pop-Up pools***

PROTECT YOUR LINER - This pool liner pad is made from a special cloth fiber that is thick and durable. Defend your liner against cuts and punctures from rocks, roots, glass and other harmful debris found on the ground. It will provide a flat base that gives an extra layer of armor for your swimming pool floor bottom prior to liner installation.

ABOVE GROUND POOL PAD – The liner guard creates a vapor barrier on the bottom of the pool to eliminate water from corroding the metal components for steel-walled above ground swimming pools. It will give your pool floor a subtle layer of cushion and padding, making a soft pool bottom below your feet, while also protecting the liner from potential damage. Also, works ideally when placed on grass or concrete under pop-up pools for an additional protection.

FITS YOUR POOL SIZE – There is no need for tape or additional materials to install this Rhino Pad. It is pre-measured for your specific swimming pool size. If you have a round, oval, or irregular pool size or shape, the liner guard can easily be trimmed to fit your needs.

The Confer Above-Ground Pool step allows safe and easy access to your pool as well as an elegant design and a long-lasting style

WEDDING CAKE POOL STEP DESIGN: Features sweeping "wedding cake" look with easy-to-climb, curved steps and sloping handrails

CUSTOMIZABLE: Step treads can be installed as inward or outward curving to best fit your pool

Item specifics Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details

MPN: QP1562

out you need a small wooden block and hammer to get it to seat tightly. After that, installation was done.

Fits both in-ground and above-ground pool ladders with poles that are 1.9 inches in diameter

Made from high-quality, molded polypropylene plastic, can hold up to 300 pounds of weight and can withstand direct exposure to sunlight and pool chemicals. Easy to install and maintain

The pebble-textured tread is relatively deep, made of the same heavy-duty plastic, easy to clean, and not painful to step on. Prevent slips, skids, and injury

PRETTY PLEASING PATTERN -The Mosaic Diamond liner print provides a shimmering cool appearance to any swimming pool. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees.

MEASURE TWICE, BUY ONCE – Whether installing for the first time, or replacing an existing liner, the Mosaic Diamond pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Round pool size is determined by measuring from the center point wall to wall in order to obtain the diameter.

INSTALL IN A SNAP OR A HOOK - This 24’ Round unibead style liner works with pools with flat-bottoms measuring 48". For an overlap style pool, simply open up the j-hook portion and slip this over the pool wall. For beaded style pools, use the standard bead after removing the j-hook portion along the score or groove mark.This will leave only the standard bead which is inserted into the bead receiver opening. ***Will not work with Intex or Pop-Up pools***

Designed for use with above ground pools; Closed cell 1/8-in thick high-density wall foam padding

Protects pool liners against rips or punctures

Cuts heat loss; Creates a smooth wall surface

PRETTY PLEASING PATTERN - Blue rocks top the swirling water backdrop with the Boulder Swirl pattern. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees.

MEASURE TWICE, BUY ONCE – Whether installing for the first time, or replacing an existing liner, the Boulder Swirl pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Round pool size is determined by measuring from the center point wall to wall in order to obtain the diameter.

INSTALL IN A SNAP OR A HOOK - This 18' round unibead style liner works with pools with flat-bottoms measuring 52". For an overlap style pool, simply open up the j-hook portion and slip this over the pool wall. For beaded style pools, use the standard bead after removing the j-hook portion along the score or groove mark. This will leave only the standard bead which is inserted into the bead receiver opening. ***Will not work with Intex or Pop-Up pools***

Swimline Bead Lock prevents your pool liner from slipping out of the liner receiver track

Use on beaded Pool Liners for a more secure fit

Creates a finished look around the pool edge

Helps Prevent Pool Wall/Floor Damage caused by pool ladders

Replacement ladder bumpers

Used as a cushion between the ladder and the pool wall

25 year warranty

25 gauge virgin vinyl material

For flat bottom pools with 48 in. to 52 in. sidewalls

country of origin : United States

package height :15.24 cm

package length:5.588 cm

Deluxe pool ladder with removable steps; designed for 36-inches to 42-inches pools

Replacing them is quick and simple too; simply set the steps in the base, then snap and lock them into place

Coated steel frame, 2 section, hi-impact plastic steps; when the pool is not in use they can be quickly detached and removed from the pool area

Above ground pool liner pad only - Blue vinyl liner sold separately

Protects your liner from sharp objects

Provides a layer of cushioning