Best Jingerl in 2026

Impedance:4-8Ohm

Power:200W

Frequency Response:45Hz-25Khz

Type:Air Filter Paper Fuel Filter

Material:Plastic + Paper

Fit For Air Filter is a great replacement for 5200 5800 52CC/ 58CC Chainsaw

Aluminum remote control for es9018 es9028 es9028pro DAC mbl6010D in this store

Size: 152mm*40mm*12mm.

Net weight: 0.1kg.

Highlight 1: Dual-core PCM1794 decoding, details, dynamics, and sound field are all very good

Highlight 2: The coaxial fiber input is demodulated by WM8805, which is a higher grade than the common CS8416 on the market, with low time base jitter and good compatibility, no popping, and easy transmission of 192K 24BIT data

Highlight 3: Using the National Semi-low distortion op amp OPA1612 low pass, the effect is better than OPA2604, the sound is transparent and delicate, and it is naturally bright. With a gold-plated IC seat, you can freely replace and upgrade the op amp

Gold Plated Screw Terminals

150 Watts RMS/300 Watts Peak

Tweeter Frequency: 3.39~20kHz

Product Name: Crossover Filters Frequency Divider; Color: White,Red,Yellow

Material: Plastic,Metal,Electric Parts; Dimension: 11.5 x 8.5 x 3.2cm/ 4.5 x 3.3 x 1.3 inches(L*W*H)

Package Content: 2 x Crossover Filters Frequency Divider; Rated Power: 180W

Audiopipe CRX-303 300 Watts Crossover 2 PACK DEAL

High Grade Polymer Capacitors

3-Way Passive Crossover Network

Brand New & Factory Original!

400W Ajustable Treble / Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

The crossover soprano + available bass binary frequency sound box, can also be used in 2.1 the high small satellite box and automotive loudspeakers.

Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY

Power: 200W (applicable to 4-inch to 8-inch subwoofer).

Speaker Impedance: 4-8 ohms.

2 Pack of 2-Way Crossover

High and Low Frequency Response

Max Power: 500W

2 Pack of 2-Way Crossover

High and Low Frequency Response

Max Power: 600W

400W Ajustable Treble / Bass Frequency Divider Distributor 2-Way Speaker Audio Crossover Filters

Large capacity, reasonable design, beautiful appearance, quality achieve full self control.

Inductance adopts anaerobic copper winding , and pure copper wire.

300 Watts Peak, 3-Way Crossover

High Grade Polymer Capacitors

3-Way Passive Crossover Network, 4-Ohm

3 Way Audio Frequency Divider is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality

High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film

Low loss and high quality, no longer have the problem of electrolytic capacitors

Series: HiFI , 2 way 2 Unit (Woofer and Tweeter)

Crossover Frequency: 3200Hz; Maximum Power: 400W; Resistance: 4-16 Ohm

Size:70*57*26 mm / 2.76*2.24*1.02 in

18 gauge inductors are used to keep DC resistance to a minimum

Unique design feature of the low-pass section allows for use of 4 or 8 ohm woofers

All components are glued or fastened down to eliminate buzzing and vibrations

Model: B-301 (high, medium and low triple divider).

Install diagonal hole 10.2cm, adjacent angle: 6.2cm

Power: 150W. Impedance: 5-8 Euro.

[Good Function] To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes. You can also use only bass or treble mode if you want.

[Perfect HiFi Sound Quality] Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music, speaking, songs of bass or treble.

[High Quality and Super Durability] Wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, hard to burnout. Any questions, please contact us immediately for solution. We will work with you to solve any problem you may have.

Impedance:4-8Ohm

Power:200W

Frequency Response:45Hz-25Khz

Professional High-quality Crossover：This is a professional frequency divider, which is widely installed in the speaker. Playing an important role of the total frequency signal segmentation. Treble and bass dual frequency support, helps to transmit the treble signal to the tweeter unit, and divide the bass signal into subwoofer unit

Perfect HIFI Sound Quality：Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music.To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes

High Quality and Super Durability: wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.Large capacity, reasonable design, beautiful appearance, circuit board design with precise cutouts and lines, free for welding, very suitable for DIY

2WAY CROSS OVER

SPEAKER BOX PLUG PLATE

18AWG LEAD WIRES

This is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality.

High-quality materials: high temperature resistant wire, wire wound ceramic resistor and imported metal film.

High-quality capacitors: low loss and high quality, no longer have the problem of electrolytic capacitors.

Applicable resistance: 4-8Ohm

Filter characteristics: high and low frequency

Maximum : 350W

Dimensions:Length 7 cm,width 5 cm,thickness 2.5 cm

Frequency: not fixed position determined by debugging.

Power: Speakers below 400W are available.

To separate the mixed audio signal into a treble, alto, bass, and then were sent to the corresponding treble, mid, bass speaker unit in playback, resulting in enhance the sound quality purposes.

Perfect HIFI sound quality: Make the treble clear, enrich the alto effect, and increase the intensity of the bass, freely enjoy clear and natural music.

High quality and super durability: wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.

Power: 150W. Impedance: 5-8 Euro

Circuit: Treble is standard 12db/oct, bass is standard 12db/oct

Frequency point: 1000-5000HZ (that is, the bass works at frequencies below 5000HZ, treble works at 1000HZ or more)

Using overcurrent protection device, durable, firm and has a long service life.

The PCB bottom plate is made of fire-resistant sheet, which is clear and clean. The corners of the line are rounded, and the thick copper layer withstands large currents.

Capacitance is the key to divider performance. Treble uses the famous German non-inductive 100V1.5U two capacitors in parallel, overcurrent protection, etc., to ensure its super load capacity and long-term durability and nice sound.

400W Ajustable Multi Speaker Treble / Bass 2 Unit Audio Frequency Divider 2 Way Crossover Filters

Large capacity, reasonable design, beautiful appearance, quality achieve full self control

Inductance adopts anaerobic copper winding , and pure copper wire