Best Kiro&Seeu in 2026

Compatible with: Acu-ra MDX 2004-2006, RL 2005-2008, TL 2004-2006, For Hon-da Accord 2004-2007, Odyssey 2005-2010, Pilot 2005-2008, Ridgeline 2006-2008, For Sa-turn Vue 2005-2006

Reference part number: 911-141, 36162-RDV-J01, 12581985, 36162RDMA01, 36162RJAA01, 36162RDVJ01

Features: Canister Purge Valve, High quality ABS material, Correct connector no cutting or splicing

Installation: directly replace and easy to install

Compatible with OE# Hyun-dai / K-I-A 393502B030

Pls check your vehicle fitment carefully again in the product description followed to avoid any wrong purchase.And pls keep the package in good condition if you want to return it.

Input Voltage: DC 3 V to 6 V,Input Current: 2 A - 5 A

Output Voltage: 400000 V(Please Pay Attention to Safety)

High Pressure Discharge Distance Between: 10 mm - 20 mm

Module properties: non-isolated step-down module

Rectification: non-synchronous rectifier

Input voltage: DC 4V ~ 38V

★Quantity : 3 Pieces.

★Color:Red/Blue/Black

★Round Fuel Dot Plug

On-board regulated power supply, connect the input end of this module to the cigarette lighter of the car, and adjust the potentiometer.

The output voltage can be adjusted to 1.25V-30V for your mobile phone, MP3, MP4, PSP and many other devices, very simple and convenient.

When need 1.25-60V to charge your electronic device, there only have 12V or 24V battery power, you can use it directly to step down 1.25-30V to solve your troubles.

★ Length: about 79mm, Needle material: stainless steel, Needle size: about 20 x 0.7mm

★The tip can insert into 4mm jack and the jack at the end can be inserted 4mm banana plug!

★Anti-breaking soft handles, Stainless Steel needles, test probes manipulate in the test more sensitive and more accurate, good quality and ultra-durable.

Mini DC-DC voltage converter board with micro USB voltage input,just connected with USB power adapter then you can get 9V 12V 18V 24V voltge

These step-up boost converter modules can fix on the emergency lamp or other electronic devices between the corresponding voltage range, DIY an output adjustable mobile power, boost charger, etc

MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload

The filter uses two 35V 220UF large-capacity electrolytic capacitors as buffer filter, which can make the output current stable and smooth.

Input voltage: LM7812 - (DC 15-24V or AC 12-18V). LM7805 - (AC or DC 7.5V - 20V). (Do not overload use it. Short circuit is strictly prohibited at input and output side)

Output voltage: DC 5V / 12V. (LM7812 version output 12V, LM7805 version output 5V. Please select the appropriate version based on demand.)

Compatible with: 2007-2017 J-e-e-p Wrangler, 2018 J-e-e-p Wrangler JK, 2008-2012 J-e-e-p Liberty, 2007-2008 Dod-ge Nitro.

Replace Part Number: 52060133AC, 52060133AD, CS650159.

Feature: The Clutch Slave Cylinder comes with the bearing and the disconnect tool, the product is pre-filled and pre-bled for immediate service upon installation, saving time, money and labor.

This product is upgraded according to the user's usage. The output is changed from the single terminal output of the original version to the terminal + 5X2 Pins output. And optimize the PCB design, improve the thermal performance and stability of the product.

There is no need to distinguish between the positive and negative terminals at the input (the second product picture is the wiring diagram). You can choose the model according to your needs. You can input AC or DC power.

Input voltage parameters: LM7806 - (DC / AC 9V-24V); LM7809 - (DC / AC 12V-24V); LM7912 - (DC / AC 15V - 24V).

Input interface:Mirco-USB.

Battery overcharge lifting voltage: 4.00 V

Battery: over-current protection current 3 A

High-quality rocker, long life, stable performance.

Two analog outputs, all the way to digital output.

X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle.

LCD screen can display 2-lines x 16-characters, working voltage: 5V; to come with a potentiometer, which is applied to adjust backlight and contrast.

Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line), how to wire: GND—GND; VCC—VCC; SDA—A4; SCL—A5, LCD display module blue with white color.

Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly used to adjust backlight and contrast.

High-quality rocker, long life, stable performance.

Two analog outputs, all the way to digital output.

X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle.

On-board regulated power supply, connect the input end of this module to the cigarette lighter of the car, and adjust the potentiometer.

The output voltage can be adjusted to 1.25V-30V for your mobile phone, MP3, MP4, PSP and many other devices, very simple and convenient.

When need 1.25-60V to charge your electronic device, there only have 12V or 24V battery power, you can use it directly to step down 1.25-30V to solve your troubles.

Voltage:5V.

Step angle: 5.625 x 1 / 64.

Stepper motor driver board with ULN2003.

Input interface: Mirco-USB.

Battery overcharge lifting voltage: 4.00 V

Battery: over-current protection current 3 A

4-digit LED display module with LED brightness adjustable and clock point.

Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.

The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Direct replacement - this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle's evaporative emissions system

Quality construction - manufactured from premium materials for a long service life

Excellent value - original equipment quality at a lower price

Genuine Oem:Yes, Fitment Type:Direct Replacement, Category 1:Emission System, Category 3:Vapor Canister, Alternate Item Name:Vapor Canister Purge Valve, Quantity Needed:1

Brand:Mopar, Other Part Number:4627996AB, 04627996AB, 04627996AB, 46279, Category 2:Emission System, Superseded Part Number:4627996AB, Length:8.25 [in], Width:2.5 [in]

Manufacturer Part Number:4627996AA, Height:2.5 [in], Fitment Footnotes:Vendor, Weight:0.33 [lb], Item Name:Vapor Canister Purge Valve

High Quality..

Easy Installation.

Fitment Info In The Product description.

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function