Best Lab Safety Supply in 2026

Material of Construction: Glass and Porcelain, Inside Dia.: 300 mm, Plate Height: 120mm

Holds a full vacuum (29.9" Hg 75.9cm) at room temperature for 24 hours; will remain airtight even if not under vacuum

Polypropylene stopcock with PTFE plug accepts 6.4mm (¼") I.D. tubing and allows a controlled entrance of air preventing unnecessary turbulence

‘Flat Dome,’ clear polycarbonate top with large ribbed knob maximizes interior clearances and provides an average of 13% greater interior volume over standard hemispherical domes

Desiccant regeneration and dry air circulation is preset

Brings RH down to about 25 percent in about 8 hours

2 latches and loops that can be locked or used with a tamper-evident seal

Interior volume: 0.74 cu ft; holds: 20 cans

Cabinets fabricated with co-polyester plastic that resists stains, chemicals and fine cracks

Co-polyester material assures blockage of 99 percent of UV light

Package Dimensions: 12 L x 8 H x 12 W (inches)

Package Weight : 7 pounds

Country of Origin : India

Holds a full vacuum (740mm Hg 20cm) at room temperature for 24 hours - Will remain airtight even if not under vacuum

Clear polycarbonate top on a chemical-resistant white polypropylene bottom

Internal groove on the flange holds a silicone rubber O-ring (I.D.: 200 mm, Flange O.D.: 232 mm)

Color: white, clear

Material: polycarbonate cover, polypropylene body

Clearance above plate (mm): 207

Flat-top dome maximizes interior space

Use with disposable or reusable desiccant

Desiccant can be placed on or under the perforated bottom plate

Made of polypropylene and polycarbonate . Size- 150 mm, Flange Outer Dia- 171mm

These auto-clavable vacuum desiccators can hold vacuum upto 740 mm of Hg for 24 Hours without any greasing.

The top dome, molded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside.

Large vacuum desiccator with one gas port that can be closed for use with standard desiccants

Hemispherical top and bottom

Has a 65L internal volume that can hold items up to 45cm (18"tall or wide

Automatic desiccant regeneration

Electrically powered air circulation

Rapid reduction of RH to approximately 25 percent in less than 8 hours

Bracket set permits vertical stacking of horizontal profile Secador 4.0 desiccators up to three units high

Fit a pair of brackets onto each end cap of a horizontal profile Secador, place second Secador on top and then tighten the included bolt

Brackets are made from 1/2" thick, white, high-density polyethylene for strength and durability

Material of Construction: Glass and Porcelain, Inside Dia.: 300 mm, Plate Height: 120mm

Interchangeably stackable up to 3 units high

Doors open to the left

Different colors are available to suit your needs

Vacuum level checking is simplified with a built-in analog vacuum gauge at the top of the unit

High-quality silicone O-ring and specially designed locking ring allow outstanding vacuum capability with virtually no leakage

Locking ring secures top and bottom halves when vacuum not in use; provides additional convenience and safety when moving the unit

Interior volume: 0.21 cu ft; holds: 6 soda cans; number of trays: 2

Use in refrigerators or at room temperature

Choose from 3 sizes; slide-in trays with perforated bottoms

The door is sealed closed with a roll latch; when the downward pivoting door is opened, it stores in a space underneath the cabinet

The door opening is 23 x 20cm; inside depth is 23cm; a small tray that fits under the bottom shelf holds the desiccant

Transparent polystyrene cabinet with smoke tinting to help protect light sensitive contents

Color: Clear

Material: Glass

Description: Glass Dome Desiccator, 12"/300 mm dia