Best Landfoxtac in 2026

【Fits most sizes】LandFoxtac universal handgun holster fits perfectly on Glock 17, 19, 23, 38, 25, 32, 26, 27, 29, 30, 39, 28, 33, 42, 43, 36. It is also compatible with 1911, Sig Sauer P226&P238&P365, S&W, M&P, Ruger, Beretta, Springfield, Taurus, Kimber, Walther, and more 9mm, 380, 45ACP pistols. Combining with the tailorable thread and two different lengths of Velcro closures, The holster can cut the thread to be fitted to a variety of handguns from subcompact to large and M&P shield M2.0.

【High Quality】LandFoxtac concealed carry gun holster is a lightweight design made from 1000D nylon with two seams to ensure sturdy. One more magazine pouch can hold another medium or small magazine. It is waterproof and can be easily worn while running or performing any physical activity. The holster for men/women features resistant hardware buttons and TPU elastic cord. The 2.15" metal clip fits up to 2-inch wide belts.

【Left & right-handed】Outside waistband or inside waistband Tactical handgun holsters is made for the right hand and left hand. There is a place for the clip on either side. Inside the waistband, outside the waistband, on the hip, behind the hip, cross draw, etc. You could wear it according to your habits. Please note handguns with laser or flashlight attachments will not fit.

100 manila letter-size file folders for filing 8-1/2 x 11 inch documents

1/3 cut reinforced, assorted position tabs (left, middle, right) for clear identification

Made of 10% recycled content; 10% post-consumer material

Use this crate for easier carry and transport of multi-caliber ammo storage

Includes Four, O-ring sealed 30 Caliber ammo cans (AC30T) for multi-caliber ammo storage

30 Caliber ammo cans are a convenient size to store all types of bulk ammo and will be impossible to tip over in the AC4C

GLOCK magazine pouch

Holds up to 10 GLOCK magazines

GLOCK Logo on Flap

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Fits: Jericho 941 F9 FS Steel Frame

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Fits: Beretta APX Carry

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: GLOCK G19 - G23 - G32

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Integrated Full Sweat Shield

Package Dimensions: 9 inch L x 6 inch W x 3 inch H

Package weightthe Product: 3.46 Ounces

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch Fiber Reinforced Stealth ABS - Claw Compatible: Yes

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

QUICK RELEASE BUCKLE UPGRADED VERSION：The crafted heavy-duty buckle, made of aluminium alloy, has very strong load-bearing capacity, which can meet your different wearing requirements. The upgraded part is that it is more convenient to adjust the length to perfect fit more than you can imagine. If you want to understand more intuitively how to be more convenient, you can watch our short tactical video

HIGH QULITY STRETCH NYLON：We intent to make the strap be stretch. The strap is made by special stretch material which is more solid than regular belt. More than that, it is very sturdy as well as stretch, which make your waist be more comfortable as well as stay tight, when you take large range of activities. Anyone who do physical activities for a long period of hours will get a great use out of the tactical belt

FOR SPECIAL YOU: Our solid belt suits for military, SWAT, fire fighters, work, sport and other tactical users. Anyone who need to take any activity will be in harmony with the belt

Fits: Springfield XD-S 4.0 inch 9MM/45ACP - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Compatible with: Glock 17/19/22/23/26/27/31/32/33/45 (Gen 1-5)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch Fiber Reinforced Stealth ABS - Claw Compatible: Yes

Fits: GLOCK 17,19,22,23,26,27,31,32,33 (Gen 1-5

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Fits: GLOCK G30S - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: Smith & Wesson Bodyguard 380 w/Insight Laser

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Fits: Ruger SR9C - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch ABS

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Fits: Walther PPQ

Style: Inside the Waistband (IWB)

Thickness: .08 inch KYDEX - Weighs just over 2 Oz.

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

ADJUSTABLE POSI-CLICK RETENTION, RIDE HEIGHT & CANT: When you holster your Ruger LCP II, you'll hear a satisfying CLICK letting you know your weapon is securely holstered & wont come out unless YOU want it to; Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal); Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry positions

OPTIONAL ACCESSORIES - CLAW COMPATIBLE: Our Ruger LCP II Tuckable IWB Holster is now Claw Compatible; Our optional Claw Kit cleverly eliminates printing forever by utilizing your belt to angle the butt of your weapon in towards your body; This effectively makes your weapon disappear inside your belt line; VOur Tuckable holsters are also compatible with the Ulticlip3 and/or Ulticlip XL, plus our Low Profile and PTD Soft Belt Loop Kits, making these the most versatile IWB Holsters available

EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw; Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights; Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat; Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying; We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw

TUCKABLE INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SF / TP9SF Elite (ONLY unless Specified); Our minimalist Tuckable IWB holsters are designed to be worn comfortably inside the waistband with either a tucked or untucked shirt for proper concealed carry; We use .08 inch KYDEX precision formed over our proprietary in house CAD designed & crafted Aluminum molds; This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters

Item will be imported from US

Fits: Sig Sauer P320 Compact - Carry: Appendix, Hip, Cross Draw, Palm-In Back - **For Palm-Out Back / OWB Carry - Select Opposite Draw Hand**

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed)

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz - Standard Belt Clip: 1.5 inch ABS

'Posi-Click' Audible Retention Lock System - Integrated Full Sweat Shield

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees

Fits: Taurus 738

Type: IWB - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees with Phillips Screwdriver (No Special Tools Needed!)

Posi 'Click' Audible Retention Lock System - Integrated Full Length Sweat Guard - Black Oxide Treated Hardware w/Threadlock

Material: .08 inch KYDEX for a Perfect Custom Molded Fit - Weight: Only 2.5 oz. - Standard Belt Clip: 1.5 inch Fiber Reinforced Stealth ABS - Claw Compatible: Yes