Best Mtb Hopper in 2026

Perfect for spot hunting and urban explorations - Lite can be carried around with a bike as a backpack.

Created for low to medium-speed jumps.

Lite geometry is short and sharp. It has a height adjustment amplitude - from 435 mm to 515 mm in height. It has a leg travel of 105 mm.

3 SKATEBOARDS + GEAR STORAGE: fits street, longboard, completes, decks, penny and more skateboards

HEAVY DUTY DESIGN: ABS plastic combined with I-beam construction holds your gear no problem holds all your complete skateboards

QUICK, EASY INSTALL: with included hardware and drywall anchors; setup in your garage, home, child's bedroom, and more

Original Rib Bones shape

2 rails, predrilled with mounting screws

Designed by Skaters

Adjustable height: 9" - 19" (Inches)

Extremely Durable & Weatherproof with a Weight Capacity of 300 lbs

Rail Size: 71.5" L x 3.15" W x 9" - 19" H

Two durable launch ramps with a tabletop connector

Smooth radius for big airs and a textured slip-resistant finish provides safety without compromising fun

Easily assembles in minutes

Use alone or with other LandWave ramps and decks to create the ramp system you dream about

Easy to assemble

No tools required

Durable Launch Ramp made with hi-impact polymer construction

Smooth radius for big airs and a textured slip-resistant finish provides safety without compromising fun

Push fit rubber feet stabilize the ramp to prevent movement

QUARTER PIPE: Perfect grip and high-density construction with galvanized steel coping, caster wheels, handles and everything you need to move it where you need, our quarterpipes are a must-have for any skateboarder. No set of skateboarding gear is complete without Ramptech!

HEAVY-DUTY DESIGN: Weatherproof and waterproof with galvanized steel coping and hardware, HDO plywood sides, and high-friction ABS plastic surfaces designed for skateboarding from the ground up. These kits are made to stand up to hard daily use, jumps, and punishment.

EASY TO ASSEMBLE: Ramptech gives you simple step-by-step instructions with easy visual steps for beginners. We use heavy-duty ABS plastic to create an outdoor or indoor high friction skateboarding surface that gives you a lightweight portable addition to your DIY skatepark, driveway, or lot.

Sturdy skater ramp set for inline skates caster boards and skateboards

1 x connector approx. 67.5 x 33 x 3.2 cm

4 x ramp approx. 56.5 x 39.5 x 15.5 cm

STEEL DESIGN – Strong and durable square tubed powder coated steel. Square makes the rail stronger and more enjoyable to slide across. Top rail is 2 pieces connected by heavy duty square steel connector. Rubber feet to prevent sliding when riding.

ADJUSTABLE HEIGHT – The Rad rail can be adjusted up and down to 3 heights without tools. Adjust top of rail from 7.5” to 8.5” and 10”. You can also disassemble the rail quickly in half with push buttons no tools required. Can easily be transported in car. No tools required.

WHATS INCLUDED – 60 Inch Top rail consisting of (2) 30 inch pieces, Square locking bar to connect the tubes together, 2 support legs, 2 support feet with rubber padding to stop sliding on surface.

Skateboard Jump Ramp - Height 5.9"

Made in Beechwood for Maximum Quality and Stability

Light and Compact - No Assembly Needed

👍 TIRED OF NARROW, FLIMSY, UNSTABLE, SMALL RAMPS FOR SCOOTERS ? Ues this solid durable stylish big scooter ramps, Its width reaches an astonishing 23.62 inch and weight capacity of 3 adults.

😎 SAFE & FUN: Skate Ramps has slip-resistant finish, non-slip rubber feet, appropriate height for bike jump and bmx

🎁 GREAT GIFTS: RC car ramps for jumping and companion for ones who love RC ramps for jumping, and the hit of the ones you love! Like they are flying with tons of fun with the skateboarding ramp.

MIXED Colors BLUE & BLACK, BUYER WILL RECEIVE EITHER AVAILABLE COLOR

Strong Durable Powder Coated Steel

Adjustable to 3 heights, no tools required

The new and exciting BMX Jump works great alone or connect it to the BMX Roller to make the perfect pump track. Transition and radius designed with world champion BMX Racer.

Powder- coated cold rolled steel with rubber feet makes it strong, durable, and portable

Designed with a toe piece for a smooth transition.

Strong Durable Zinc Coated Steel

Adjustable to 3 heights (6-8 inches), no tools required

Fat 1.5" round diameter rail that measures 54" in length. Wide and stable base. Easy to Assemble, no tools required. Weighs 11 LBS

Foldable - Collapsible Folding Legs

Portable - Detachable Legs that doubles as Carrying Handle

Durable - Supports up to 300lbs

Perfect for spot hunting and urban explorations - Lite can be carried around with a bike as a backpack.

Created for low to medium-speed jumps.

Lite geometry is short and sharp. It has a height adjustment amplitude - from 435 mm to 515 mm in height. It has a leg travel of 105 mm.

GRIND BOX: Galvanized steel edges and a high density wood body make our grind boxes the perfect heavy duty addition to your shredding. Add grinds, manuals, and jumps into your routine. No set of skateboarding gear is complete without Ramptech!

HEAVY-DUTY DESIGN: Weatherproof and waterproof with galvanized steel coping and hardware, HDO plywood sides, and high-friction ABS plastic surfaces designed for skateboarding from the ground up. These kits are made to stand up to hard daily use, jumps, and punishment.

EASY TO ASSEMBLE: Ramptech gives you simple step-by-step instructions with easy visual steps for beginners. We use heavy-duty ABS plastic to create an outdoor or indoor high friction skateboarding surface that gives you a lightweight portable addition to your DIY skatepark, driveway, or lot.

Professional Skate Jump Ramp

Beechwood - Curved plywood - Painted

Easy to transport and assembly (screws and hex key included)

Rib Bones

Brand new product from the OJ Wheels crew! Juice Bars are OJ's brand new rail design and ready to slide on anything you can get on top of!

This listing comes with a pair(2) of OJ Juice Bars.

Rib Bones

Replaces LandWave Starter Pack (LWSPB)

Use alone or with other LandWave ramps and decks to create the ramp system you dream about

Easy to assemble; no tools required

Strong Durable Zinc Coated Steel

Adjustable to 3 heights (6-8 inches), no tools required

Fat 1.5" round diameter rail that measures 54" in length. Wide and stable base. Easy to Assemble, no tools required. Weighs 11 LBS

PORTABLE AND EASY TO INSTALL. The portable skateboard ramp assembles in 30 seconds, no tools required. The bike ramp is easy to take apart to be stored and loaded into the car due to compact design.

SLIP-RESISTANT DESIGN. The RC ramp has non-skid surface and non-slip rubber feet, which is safe for jumping, skating, and more. Also creates a strong resistance to prevent players from slipping.

HIGH QUALITY MATERIAL. The sturdy and durable kicker ramp is made of solid wood. The scooter ramp supports up to 400 lbs and width of 23.6 inch, players can be assured of the quality and play hard.

Comes With 10 Wood Screws

Length: 14.25 Inch

Mutiple Colors available

KICKER: Perfect grip and high-density construction with galvanized steel coping, caster wheels, handles and everything you need to move it where you need. Get the perfect launch and open up your shredding! No set of skateboarding gear is complete without Ramptech!

HEAVY-DUTY DESIGN: Weatherproof and waterproof with galvanized steel coping and hardware, HDO plywood sides, and high-friction ABS plastic surfaces designed for skateboarding from the ground up. These kits are made to stand up to hard daily use, jumps, and punishment.

EASY TO ASSEMBLE: Ramptech gives you simple step-by-step instructions with easy visual steps for beginners. We use heavy-duty ABS plastic to create an outdoor or indoor high friction skateboarding surface that gives you a lightweight portable addition to your DIY skatepark, driveway, or lot.

🛹 Strong and Durable Material: Made of powder coated steel material, the grind rail is strong enough to take punishment from skateboards, scooters and snowboards. The size of grind rail is 67.7 x 19.6 x 12.2 - 20 inch. The grind rail helps riders improve and learn new tricks comfortably.

🛹 Adjustable Height: Our grind rail can be adjusted to three different height settings, and no tools are required. When you feel you need to move it up a step, using spin lock for easy height adjustment. We also include unique fastener to avoid swaying.

🛹 Sturdy Skateboard Grind Rail: With strong and stable base and reinforced triangular structure, our skateboard ramp has excellent durability and performance. It has a maximum bearing capacity of 264.5(lb). The non-slip rubber pads under the bases can prevent movements while grinding.