Best Sincerityli in 2026

Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current)

Also replaces some Chamberlain models

Same as Part number 25A18

Newer chamberlain manufactured garage openers including sears craftsman, chamberlain, LIFTMASTER

Newer chamberlain openers that currently have black brackets that clip onto the garage door track

Chamberlain openers that currently have 1 sensor with a green light & sensor with a yellow light

includes gear and sprocket, worm gear, grease, motor shaft & sprocket bearings

compatible with chain driven 1/3 & 1/2 HP openers from Liftmaster, Sears, Craftsman & Chamberlain

1-Pack

The product is 8', new structural steel rail extension kit

Easy and simple use kit

The product is manufactured in China

Sears Craftsman Garage Door Opener Replacement White Main Gear 41A2817 2 Pack.

Length: 233 in. 20 Grooves Per Six Inches

VERY IMPORTANT** LOOK AT PICTURES***MAKE SURE THE 2 ENDS OF THE BELT ARE THE SAME AS YOUR OLD BELT***

For use with various LiftMaster and Chamberlain Belt Drive Garage Door Openers.

This part is compatible with models including; 2060L,CM8600,ISD995-2WKM,PRO90S,CMD9900,IS550-1,IS550-2,AC SCREW DRIVE,ISL980,G2500,H4000,3560,PRO98S,CM7500S,H6000,H8000,IS850-2M,CM8500S,GXL-CL,36280S,36280R,IS550-2X,PRO99,CM7600,PLUS 3060L,4560,PRO95,IS525,GXL SERIES,IS920,ISD1000,2560,EXCELERATOR,IS-IMS-ISL A SERIES,IS-IMS-ISL B SERIES,ISD SERIES,IS900-1,ISL950,ISD990,IS900-2,GX SERIES,ISD995,ISD990-2,G SERIES

This Is A Manufacturer Substitution. Part May Differ In Appearance But Is A Functional Equivalent To Prior Parts Including; 20414R,25589C,25589S,25589S,34107R,36179R

Genuine Original Equipment Manufacturer (Oem) Part. Compatible Brands: Genie

Full belt assembly for use with Liftmaster/Chamberlain/Sentex belt drive models 2500, 2580, 2280, 3500, 3580, 3280

Full belt assembly for use with chamberlain belt drive models WD822k, WD922k, WD912k

For standard 7 foot high garage doors

Fully compatible: the Chain Drive Rail Extension Kit for 8'-High Garage Doors is required for reliable, everyday operation of Chamberlain chain drive models in 8-ft. garage door applications..Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

Easy Setup: featuring a quick-install extension rail and replacement chain, the kit includes all necessary hardware and instructions for a quick and easy installation.

Includes one-year warranty, rail extension, replacement chain, all necessary hardware and an instruction manual for easy setup.

KEYED GARAGE DOOR EMERGENCY RELEASE: With this Genie Universal Emergency Release kit, you’ll have peace of mind that you can release your automatic garage door opener during power outages or if you forget your remote.

UNIVERSALLY COMPATIBLE: Compatible with all garage door openers, this keyed garage door emergency release kit can be used no matter what brand garage door opener you have.

EASY INSTALLATION: Installation is quick and easy –it attaches through the top of the garage door to let you release the garage door opener and manually open the door during a power outage or when you don’t have your remote.

Made of high quality heavy duty carbon steel, extra thick 6mm high strength steel, sturdy and anti-deformation, give you double defensive power, anti-rust black powder coating can provide anti-rust protection, perfect for door reinforcement or door barricade

2x4 door barricade brackets specially designed for standard 2x4 door barricade security bar, extra thick metal is strong enough to prevent any forced break-ins, used for door reinforcement and home security (Door barricade bar is not included)

Door barricade bracket works with all type of inswimg or outswing door sizes, reinforcement for house, barn door, shed bar, garage door, gate, backyard gate, fence gate, basement door, warehouse, chicken house door and more

Compatible with chain drive chamberlain sears craftsman manufactured operators 1984-current.

Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings.

Compatible with chamberlain, sears, craftsman and lift master 1/3 and 1/2 HP chain drive models.

Well Built: Made of premium steel plated with zinc, which is strong and durable.

Size: Outer diameter-3 inch, inner diameter-3/8 inch.

Package Content: 2 pieces.

EASY APPLICATION: 4" x 6" pre-cut design allows for a stress-free application without the need for any tools

ULTRA STRONG NON-DAMAGING MAGNETS: our heavy-duty magnets are built to stay on your metal garage door without worry damaging it

INSTANT CURB APPEAL: transform your garage in seconds by simply applying our magnetic window panes

For garage door openers that currently have sensors installed

41A4373A Sensors are compatible with LiftMaster and Chamberlain Brand from 1993 - late 1990's

Each sensor has a green light and a bolt that runs right through the center of each sensor

Long Range Sensing distance up to 50 ft.

Built-In Heater for dependable performance in most environments.

Alignment strength indicator signals optimal beam alignment. Requires power only on one side of the installation.

Sold on Amazon

LiftMaster Door Opener Receiver Logic Board replacement for board number 41AB050-2M

Match the 41Axxxx-xx part number found on the control panel of your garage door opener.

Length: 233 in. 20 Grooves Per Six Inches

VERY IMPORTANT** LOOK AT PICTURES***MAKE SURE THE 2 ENDS OF THE BELT ARE THE SAME AS YOUR OLD BELT***

For use with various LiftMaster and Chamberlain Belt Drive Garage Door Openers.

◆Please Note !! This kit only including 32pcs magnetic panels. Does not include hinges. Package: 32 Pcs Magnetic Panels , Size 6.125" X 4" .

◆Household Essentials: Upgrade Your Garage Doors ! Without Damaging Doors Or High Cost .Durable: Resistant From Heat / Rain / Washing And No Fade. Strong Magnetic, Do Not Drop

◆Magnetic Panels: Magnetic Material Creat Faux Window On Your Garage Doors . Only Check Your Garage Door is Magnetic Before Purchase.

This is KIPA Brand Top Quality Drive Gear, Durable. Pack-3

Fits For Sears Craftsman models: 139.53990, 139.53992, 139.53914, 139.53985, 139.53930, 139.5365, 139.53964, 139.53646, 139.53660, 139.53920, 139.53939, 139.184050, 139.18803, 139.18805, 139.18814, 139.18830, 139.53603, 139.53629SRT, 139.53629SRT1, 139.53674SRT2, 139.18850 and 139.18851.

Works with ALL 1/3 HP, 1/2 HP and 3/4 HP chain and belt drive garage door openers manufactured from 1984 to the present for these manufacturers: LiftMaster, Sears Craftsman, Chamberlain, Garage Master, Master Mechanic and Wayne Dalton Compatible with these belt drive models: 1280, 1280R, 2580, 2585, 8100, 8100M, 8200, 9200, WD922K, WD912KS, WD822KS

1.Fine design : Simplicity design concept、 simple and unique appearance、 rustic color，giving people a concise / refreshing visual effects；attach to steel doors for an instant upgrade to your curb appeal.

2.Easy to install and strong adsorption： Strong magnets inserted, really easy to install, remove, relocating, no screws, drilling holes, or residue left behind, no worry of garage door damage.Compared with other brands, one strong magnet is added to each hinge，not only beautiful appearance, but also strong adsorption! ( Please stay away from the folding seam to avoid the interference between the hinges and the weatherstrip when moving the garage door! )

3. High quality & durable：Reinforced Plastic is used for our magnetic hardware, UV & weather resistant, made to last and not crack under the cold, heat, water, no color fading issue.

Installs on the top panel of the door, using this bracket to attach the garage door to the opener

Low carbon steel construction in zinc plated, durable and rust-proof

Adjustable to 18", 21" or 24", two piece adjustable design, easy to install and adjust

Garage Door Repair Parts - Garage door drum made from strong aluminum, has heavy, solid construction. Come in pairs (right and left). 3 set screws for a tighter fit.

The Necessary Garage Door Replacement Parts - Used in conjunction with cables to keep the garage door in balance during opening and closing.

Prolonging The Life Of Garage Door System - Garage door drum set for max. door height 8". Maximum door weight can be supported: 530 lbs.

This part is compatible with models including; 13957915,13953964SRT,13957918,13953906D,13953916D,13953918D,13953904D,13953914D,13954918,13954915,13954931,1393043,WD962KD,139559181,13953984SRT,13953939D,248754,13953919D,13953915D,13953915DM,248739,13953919,13955918,WD962KLD,13953914,13953954,13954920

This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 041C0111

Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman,Chamberlain

Liftmaster 41A4885-2 Belt Drive Gear and Drive Pully Set

Includes:Drive shaft with belt pulley,spring washer, and

thrust washer, retaining ring, bearing plate, and

This sleek, space-saving design mounts on the wall beside your garage door, freeing up ceiling space

This elite series model comes fully equipped with security 2.0, myq

Get reliable, durable and powerful performance with our p3 motors

AFTERMARKET PART, NOT AN ORIGINAL

Installation instructions and video included with purchase

See description for full list of compatible openers and part numbers

Belt for a 8 foot High Door, with a 11' Rail

***Please make sure Both Ends of your old belt the Ends of the item Pictured***