Best Ufp By Dexter in 2026

For use with 1.968 inches (49.99 mm) hub bore, Outer Bearing Cone: M - 12649, 07100, Outer Bearing Cup (race): M-12610, 07196, weight: 1.00 lbs

Prevents wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers

Grease level is shown with Auto Check feature - Eliminates bearing repacking

4 sets of inner bearings and races L68149/L68111

4 sets of outer bearings and races L44649/L44610

4 pieces of double lip grease seals 10-19 (171255TB, 1.719'' I.D.)

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

4 inner bearings L68149 ID 1.378'' and 4 inner races L68111 OD 2.362'';

4 outer bearings L44649 ID 1.063'' and 4 outer races L44610 OD 1.980'';

4 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

L-44649 Bearing (1-1/16" inside dimension) x 4

L-44610 races (1.98" outside dimension) x 4

Grease seal x 2, Cotter pins x 2, Dust caps x 2

4-pack Grease Cap Plugs for EZ Lube Grease Caps

Rubber Lube plugs for 1.18" dust cap hole

Dexter EZ Lube Grease Cap

MODEL: Bearing Buddy 1980A (Chrome Version) / Protective Bra 19-B

SIZING: 1.980 inch (inside diameter of hub) See secondary photograph for measuring instructions.

CONTENTS: One Pair of 1980A Chrome Bearing Buddy(s) with auto check feature & Matching Protective Bra(s)

Kit Includes: (2) L-68149 1-3/8 Inch Inside Dimension INNER Bearings (2) L-44649 1-1/16 Inch Inside Dimension OUTER Bearings

(2) L-68111 Inner Race 2.362 Inch Outside Dimension (2) L-44610 Outer Race 1.98 Outside Dimension

(2) Grease Seals - 2.56 Inch Outside Dimension - 1.72 Inch Inside Dimension

Kit Includes : (4) L-44649 Bearings - 1-1/16 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

L-68149 1-3/8 Inch Inside Dimension x 2, L-44649 1-1/16 Inch Inside Dimension x 2

L-68111 Inner Race 2.362 Inch Outside Dimension x 2, L-44610 Outer Race 1.98 Outside Dimension x 2

Grease Seal x 2, Cotter pins x 2, Dust Cap x 2

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

Kit Includes (4) - L-44643 Bearings - 1 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

For use with BT8 spindles

Rubber, double lip design with steel construction

Dimension: 1.249'' x 1.983'' x 0.250''

Kit for Easy Boat Trailer Maintenance: Complete bearing kit with tools included for smooth boat trailer operation

Tools to Prolong Trailer Life: Replace worn bearings to extend the life of your boat trailer and accessories

Durable Parts for Marine Use: Designed for marine and boating use, perfect for fishing and recreational boats

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

Replacement bearing kit

Fits 3,500 lbs. capacity trailer axles

Includes every component needed to repack one axle hub

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axle hub wheel for 1-1/16'', L44649/L44610 x 4, 12192TB seal, cotter pin and dust cover x 2.

【HEAVY DUTY 】These dust caps are made of high quality carbon steel and rubber, surface zinc plated, strong and durable, not easy to deform, corrode or rust.

【WITH EXTRA 2 SEALS】 2 caps meet your daily use and extra 2 seals will be a reserve in case you get into trouble.

【DIMENSION】OD: 1.98 inch/ 50.4 mm.Please check the size information and compatibility carefully before placing an order.

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axle hub wheel for 1-3/8'' to 1-1/16'', L68149/L68111 and L44649/L44610 x 2, 171255TB seal, cotter pin and dust cover x 2.

FITTING SIZE: CZC AUTO bearing partner bras fit 1.98 inch bearing protectors, for most small trailers. Please note that Bearings is not included

HIGH QUALITY: gray durable rubber caps make trailer bearing buddy rustfree & corrosion resistant, ensures longer-lasting fit

MAIN FUNCTIONS: keep water, dirt or road grime out of wheel bearings. Maintain pressure and keep bearing greased

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axle hub wheel for 1-1/16'', L44649/L44610 x 2, 12192TB seal, cotter pin and dust cover x 1.

IF YOU TOW A TRAILER YOU NEED Genuine Bearing Buddy. Prevents wheel bearing failure on Boat, Snowmobile, ATV, Horse, RV and Utility trailers! Be Safe and Protect Your Investment

ELIMINATES EXPENSIVE BEARING REPACKING - Prevents costly repairs and saves time! No more need to take your bearings out every year to re-pack

EASY TO INSTALL – All you'll need to do is hold the Bearing Buddy against the hub with a small block of wood and drive it into place with a hammer

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axles hub wheel for 1'', L44643/L44610 x 4, 12192TB seal, cotter pin and dust cover x 2.