Best Whitecap Teak in 2026

6-5/8in W x 6-7/8in H x 1-1/2in thick

For motors up to 12 horsepower only

Fits 7/8in or 1in railings

Motor mount kit designed for Index inflatable boats

Lets you attach up to 3.5-horsepower motors

Made of plastic backing with aluminum support arms

Kit Includes: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262

Brilliantly Polished with a Seamless Design

Contains a Drain Hole to Protect Against Corrosion and Freeze-Up

Kit Includes: Safe-Skeg, Mounting Hardware, Instructions, Allen Wrench and Loctite 262

Brilliantly Polished with a Seamless Design

Contains a Drain Hole to Protect Against Corrosion and Freeze-Up

Fully adjustable 28" - 59" transom saver.Fit Type: Universal Fit

Designed for optimal weight distribution - Rated for outboards up to 150 HP

Easy installation and removal

Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered

Reliably supports the cantilevered engine during transport

Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket

MOTOR ACCESSORY: Keep your boat’s engine in good condition by protecting it with the efficient and durable Shoreline Marine Dual Flow Flusher. This equipment is designed for most inboards and outboards and helps increase its life by protecting it from contaminants.

PROTECTS ENGINE: This motor flusher helps extend your outboard engine’s life by regularly flushing away salt, silt, and grime after use. Not only clean, but you can also winterize your boat with the help of this essential boat accessory and keep your investment in good condition.

EASY-TO-OPERATE: You can connect this boat motor flusher to a standard garden hose and help keep your motor clean by flushing away sand, salt, silt, and mud. If you need to tune your engine and make minor adjustments when on the water, you can trust this tool.

Country Of Origin: Taiwan, Province Of China

Item Package Dimensions: 90.17 L X 17.78 W X 10.16 H (Cm)

Item Package Weight: 5.2 Pounds

Designed for 2- and 4-stroke motors up to 15 HP or 132 lbs.Fit Type: Universal Fit

10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance

Do not use without Panther 55-0415 safety cable—included

ENGINE PROTECTION: Universal Engine Motor Flusher provides a way to connect Outboard and I/O Sterndrives to a freshwater source and effectively flush out sand, salt water, sediment, seaweed, and silt. It helps extend your outboard engine's life

EASY TO OPERATE: You can connect these Outboard Motor Muffs to a standard garden hose or an optional quick-connect male adapter end and rubber washer

UNIVERSAL COMPATIBILITY: Fits most Outboards outboard engines including Mercury, Yamaha, Evinrude, Mercury, Yamaha, Johnson, Chrysler, Honda, Nissan, and Suzuki as well as others

Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions

The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts

Fit type: Universal

RATED FOR OUTBOARDS: Straight Transom Saver with Roller Mount is suitable for Most Outboards up to 150 HP

ADJUSTABLE: Transom Saver adjusts from 20-1/2 to 31 Inches to accommodate most of the boats

SHOCK ABSORBING: Shock-absorbing mechanism is designed to protect your engine and boat. It help to Stabilize engine and steering mechanism when trailering

Universal trolling motor bracket for clamp-on type electric trolling motors.

Constructed of marine aluminum with black Nylon plastic

Designed for motor to be removed when boat is under engine power or being trailered.

Easy to install and uninstall, collapsible, light weight outboard motor stand

Sturdy steel cart frame is capable to load 154lb, and the screw and pins on the carrier is made by 304 stainless steel

Ergonomic handles make the cart easy to steering and transport

Angled V-black for positive alignment

It transfers the weight from transom to trailer

Adjustable motor support

Replacement bolt on bracket for transom saver head

Easy to replace when old bracket is damaged or worn

Helps support the weight of the outboard or stern drive unit with trailering or in storage to releive pressure from the boat transom or engine transom bracket

DESIGENED FOR: Rail Mount Outboard Bracket is designed to be mounted onto the rail of the boat and provides a secure and stable platform for the motor. It's a great option for boat owners who want to maximize space on their vessel while still being able to use an outboard motor

2-PIECE: Rail Bracket 2-piece mounting blocks clamp around 1" (25.4mm) O.D. T rail. Attachment hardware, 4 Stainless Steel Bolts, Washers and Pressure Nuts included

MARINE-GRADE MATERIAL: Durable UV-stabilized polypropylene is designed to withstand exposure to sunlight, saltwater, and other environmental factors that are commonly found in marine environments

Max Transom Thickness 3"

Max Width 6" (From washer to washer)

Made of high strength nylon plastic.

Specifications : Board Area 260 x 205mm(10-1/4" x 8"), Mount area on boat 135 x 230mm (5-1/4" x 9"), Mount holes 8mm, Lift range 340mm (13-3/8");

Outboard motor bracket suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts;

Material: Anodised aluminium construction; Solid polypropylene mounting board;

✅UNIVERSAL FITMENT: Supports outboard motor brands such as Yamaha, Mercury, Suzuki, Evinrude, Honda, and Tohatsu. Specific Fitment range for outboards with single ram hydraulic tilt systems (See Fitment Guide). The intended use is to support and brace the outboard motor when trailering to prevent any unwanted motor travel up and down when trailering, This unwanted movement can put damaging pressure to the tilt and trim unit's hydraulic system and boat transom without using wedge/block support.

✅EASY TO USE: No drilling or special installation required, no need to bend over or get on your knees. Eliminate metal to skeg scrapping compared to metal transom savers. Simply tilt engine up, insert high pressure wedge into Tilt Ram piston, then tilt down and you are on your way. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, skeg support, or brackets. All you need is the high pressure wedge.

✅UPGRADED DESIGN/HIGH PRESSURE SYSTEM: High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Compression testing over 1000 lbs of pressure, extended wedge length to aid in higher skeg ride height, withstand extreme hot/cold temps under compression, 10 inner notches for secure connection to tilt shaft, colored visual surface, and ergonomic design for storage in dry box. Pressure between the wedge and tilt/trim unit will not damage the wedge unit.

Works with two and four-stroke motors up to 35 HP and 263 lbs. maximum weight

Features a rugged polypropylene mounting board

Includes stainless steel mounting hardware and safety cable

Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern rail

injection molded Nylon polypropylene rail mount outboard bracket

.It fits rails up to 1" and includes stainless steel mounting bolts.

Marinebaby Heavy Duty aluminum Motor Bracket Suitable for 2-stroke Motors 7-1/2 HP to 20 HP,

Stainless Steel Springs Counter-balance Motor Weight, Solid polypropylene mounting board

5-position Locking Height Adjustment From 195mm-320mm

Strong aluminum tube frame - Tough alloy drawn aluminum up to 25 percent stronger than extruded tube

Semi-pneumatic rubber tired wheels

Handles motors 0-30 HP and up to 130 pounds

Solid UV resistant polypropylene backing plates for outboard motor mounting

Smooth rounded outer edge and tapered shape for a clean professional finish

Thicknesses: 2/3"

This is a heavy duty Motor Bracket that is made of anodized aluminum and it comes with a solid polypropylene mounting board as pictured

This motor bracket is most suitable for 2-stroke motors 7 1/2 HP to 20 HP

This motor bracket is durable and it fits small to medium sized powerboats and yachts

Entirety is made up of Marine Grade Stainless Steel, Base is made up of plastic,operated automatically through engine mount.

Motors up to 10 HP or max weight 90 lbs.Please Note: Do not use 14" travel with 4 stroke engine, Use safety cable.

Easy to Use: Ideal for sailboats, powerboats, locks and holds motor up or down in two vertical running positions.

Setbacks reposition motor into cleaner water to increase propeller efficiency and minimize prop slippage

Reduces drag

Boat exhibits more bow lift

Our transom saver for outboard motors helps to reduce stress on a boat's transom when being trailered, eliminating jitter.

The surface of the boat motor transom support is treated with hot-dip galvanizing and powder spraying methods to prevent rust.

The adjustable motor support bracket comes with 2 rubber traps and is suitable for outboard motors below 150HP. Adjustment range(20.27" to 30.7")