Best Accelerator Pedal Switches in 2025

1,Used for all sorts of DC motor reversing applications such as camper trailer jacks, RV Power Jack, winch controls for in/out operation, door open closed, liftgate up/down..so many uses.

2,Very handy item to have around the shop if you are a DYI type.

3,This unit has a rubber weather seal on underside of mounting lip for added weather resistance.

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Country Of Origin : United States

The Package Height Of The Product Is 4.82 Inches

The Package Length Of The Product Is 10.58 Inches

Accelerator foot switch for Power Wheels children ride on car

This is the larger of the two accelerator switches, named part # 00801-2039

Dimensions: 2.5 x 1.5 x 1 inchs

Accelerator Pedal position Sensor's primary job is to monitor the position of the throttle pedal and send an electronic signal to open the throttle body as you depress the gas pedal. The APP sensor essentially tells your engine how fast or slow to drive as you press the gas pedal. When you press down or lift off the throttle, it sends an electrical signal to the vehicle’s ECU or ECM as it's also referred to, and then transmits that signal to the fuel system.

The primary reason why this part would fail is due to exposure to high heat as it's typically located on the floorboard and next to the firewall of the vehicle.There are occasions when it will fail, wear out or need to be replaced.Like most components on the vehicle, a bad or failing APP sensor will display a few warning symptoms including triggering error codes, warning lights and a few physical symptoms that should alert the driver that a problem exists.

This Accelerator Pedal Position Sensor Assembly Fits the Following Vehicles: 2003-2007 Honda Accord, 2003-2006 Honda Acura MDX, 2004-2008 Honda Acura TL, 2004-2008 Honda Acura TSX, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot, 2006-2014 Honda Ridgeline.

Packag Included: The package includes 4 pieces of brake light switch stoppers, sufficient quantity to meet your daily requirements for usage and replacement, you can also share them with your friends and family.

High Quality Material: The brake pedal stop pad is made of rubber material, sturdy and firm, not easy to break or deform, comfortable to touch, which can retain its color and shape after long time use, giving you a good using experience.

Great Workmanship: The brake pedal stop pads adopt classic black design, not easy to fade, simple and vintage, easy to match with your different colors of cars, suitable for you to use for a long time.

What you will receive: the package includes 12 pieces of brake light switch stoppers, sufficient quantity to meet your daily requirements for usage and replacement, you can also share them with your friends and family

Reliable material: the brake pedal stop pad is made of rubber material, sturdy and firm, not easy to break or deform, comfortable to touch, which can retain its color and shape after long time use, giving you a good using experience

Appropriate size: the brake light stopper is approx. 1.8 x 1.1 cm/ 0.71 x 0.43 inch, suitable size for you to use, compatible with your different projects, portable to carry and store, without taking up too much space for you

Restores Throttle Response & Acceleration

Specifically Designed For Models Manufactured On Or After Manufactured After 10/01/200

Replaces Models With Fixed Gas Pedals Only; Does Not Fit Adjustable Pedal Models

Ideal replacement - this accelerator pedal position sensor matches the fit and function of the original sensor

Plug & play installation - no special tools or programming required to install this sensor

Trustworthy construction - engineered in North America and made from high-quality materials for long life

GM recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

【Reliable Material】:Brake Pedal Pads are made of automotive grade plastic, sturdy and firm, excellent mechanical strength, wear resistance and good corrosion resistance, not easy to break or deform, suitable for you to use for a long time.

【Appropriate Size】The brake light stopper is approx. 1.8x1 cm/ 0.71x0.4 inch, compatible with your different projects, they have no need for complex installation tools or steps, so you can use them with confidence. Easy to carry and store, will not take up too much space.

【Function】When the car's brake lights are always on, you need to fix it immediately for driving safety, our clutch pedal stoppers can solve the issues for you at once, saving your money and time, they suitable for most cars, trucks or other vehicles.

(Standard Size) 00801-2039 Replacement Standard Size Power wheels Accelerator Gas Foot Pedal Plunger

Approximate Measurements: 1.3" x 1.5"

Compatible Replacement for Peg Perego MEPU0001

OEM NEW Accelerator Gas Pedal w/ Travel Sensor 05-11 LaCrosse Impala 25830023

Accelerator Pedal w/ Sensor

LaCrosse Impala

GM-recommended replacement part for your GM vehicle's original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Brand New Accelerator Pedal Assembly

Solves Erratic Throttle/Pedal Issues From Failing Pedal Position Sensor

See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model

Genuine General Motors Accelerator Pedal Support - 15978191

Genuine General Motors OEM product

High Quality - Brake pedal pads are made of automotive grade plastic, With excellent mechanical strength, Good wear and corrosion resistance, Not easy to break or deform, Suitable for your long-term use.

Size - The brake light plug is approx. 1.8x1 cm / 0.71x0.4 inches, Easy to carry and store without taking up too much space.

Function - When the car brake light is always on, you need to repair it immediately to ensure driving safety, our clutch pedal limiter can solve the problem for you immediately

Specs: Description: Accelerator Pedal Switch, No of Positions: 2, No of Terminals: 2, Packaging type: Branded bag, Normally closed/normally open

Replaces OEM Numbers: E-Z-GO: 612889, Husqvarna: 575621101, Hustler: 605538, John Deere: AM143287, Kubota: K7621-62251

Compatible With/Replacement For: E-Z-GO: RXV, 2008 and newer

【Reliable Material】:Brake Pedal Pads are made of automotive grade plastic, sturdy and firm, excellent mechanical strength, wear resistance and good corrosion resistance, not easy to break or deform, which can retain its color and shape after a long time of use, giving you a good user experience.

【Appropriate Size】The brake light stopper is approx. 1.8x1 cm/ 0.71x0.4 inch, compatible with your different projects, suitable for most car models. This brake switch stopper are easy to carry and store, they have no need for complex installation tools or steps, so you can use them with confidence.

【Function】When the car's brake lights are always on, you need to fix it immediately for driving safety, our clutch pedal stoppers can solve the issues for you at once, We have tested the safety of these brake pedal stop pads many times, ensuring product safety, stability and durability.

Black accelerator pedal switch ,for Children's Electric Vehicles

kids Ride On cars Accelerator foot pedal switch

Product is Applied to Specific Children Riding Toys

Brand New Accelerator Pedal Assembly w/Sensor

Allows Replacement Of A Failed or Damaged Accelerator Pedal (Models With Adjustable Accelerator Only)

For Models With Non-Adjustable See APDTY 112889

OE:25324762

The Accelerator Pedal Sensor made of high-quality materials with good stability and durability.One-year guarantee.

Please check whether the OE number, model, and brand match before purchasing to avoid purchasing mistakes.

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Note_1: Accelerator Pedal Sensor

Note_2: With Fixed Pedals

FINE WORKMANSHIP: The Acceleration Control Module is professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability.Procurement with confidence:From raw material procurement to product factory inspection, we will conduct inspections at each stage, and each stage has records. The records of each quality control link in the production of the product are very strict, so you can buy with confidence.

Function: This accelerator pedal control switch is correspondingly sensitive, fast, and can effectively control the acceleration speed of the golf cart.

OEM Number:Accelerator Pedal Switch，The reference OE number for this accelerator pedal switch is 612889, it is molded and designed from original data to fit perfectly according to the numbered specification to help you find the best fitting assembly.

Provides the ECM with voltage signals to identify accelerator pedal position

Exact match for the original equipment design

Incorporates the circuitry specified by Original Equipment Manufacturers within the sensor element to ensure signal output consistency

1.Same size as the ARB/Carling/NARVA switches. (it has a face surface size of 50mm x 25mm and uses a standard din size mounting hole of 37.2 mm x 21.2 mm.Please check the size before you bid.)

2.Waterproof IP 66,Double Pole Double Throw ON-OFF-ON switch,black hard surface rocker.Rated at 20amp/12v and 10amp/24v.

3.Short circuit protection, overload protection, against polarity reversal protection.

ON-OFF-ON Double Pole Double Throw switch.Means that it works when you press the switch up or down,it is off when you press the switch on middle position.

Ideal for 4WD and transport applications

Pin: 7 Pins