Best Supreme Suspensions Air Suspension in 2026

You might hesitate to trust a spacer kit to transform your truck's stance, but the Supreme Suspensions 2.5-inch leveling kit makes a compelling case for itself. Crafted from rugged T6 billet aluminum, these spacers are designed to give your 2WD Dodge Ram a much-needed boost in ground clearance and a more aggressive profile. It is perfect for clearing larger custom wheels and tires without the complexity of a full suspension overhaul. While the installation typically takes a few hours, you really should have a coil spring compressor on hand to make the job smoother. The kit even throws in a dual-sided microfiber towel for detailing after you've finished the work. Just remember that the lift height isn't a perfect 1:1 ratio with the spacer thickness, so measure your ride height once you're finished.

Supreme Suspensions delivers a massive visual upgrade for your Dodge Ram with this high-strength T6 billet aluminum leveling kit. If you are looking to ditch that awkward factory rake, these 3-inch spacers provide the necessary ground clearance to clear larger, custom wheels and tires. The kit is surprisingly comprehensive, arriving with a Pro Pack and even a dual-sided microfiber towel for post-install detailing. While the installation typically takes a few hours, keep in mind that spacer thickness doesn't translate to a 1:1 lift ratio, so you'll want to measure your ride height once finished. It is a smart, cost-effective way to transform your truck's stance without a full suspension overhaul, provided you have a coil spring compressor on hand for the job.

Most truck owners settle for a factory stance that limits their off-road potential, but this Supreme Suspensions kit fundamentally changes the geometry of your Dodge Ram 1500. By providing a 3.5-inch front and 2-inch rear lift, it clears the way for much larger custom wheels and tires while significantly boosting ground clearance. The T6 billet aluminum construction feels incredibly robust, and the bolt-on design makes the installation process surprisingly manageable, typically taking between two to four hours. Just keep in mind that this specific kit is tailored for 4WD models and won't fit Rebel, TRX, or Mega Cab configurations. It is a professional-grade upgrade that transforms your truck's profile from standard to aggressive, backed by a limited lifetime warranty for peace of mind.

Supreme Suspensions delivers a top-tier leveling solution for Dodge Ram owners looking to ditch that awkward factory rake. This 2-inch front lift kit is crafted from rugged T6 billet aluminum, offering a much more aggressive stance and extra ground clearance for larger tires without the complexity of a full suspension overhaul. While the installation typically takes a few hours, you will definitely want a coil spring compressor on hand to make the job smooth. It is important to remember that the spacer thickness doesn't translate to a 1:1 lift ratio, so keep a tape measure handy to verify your new ride height. The kit even throws in a dual-sided microfiber towel for post-install cleanup, which is a thoughtful touch for any DIY enthusiast.

Truck owners wanting to ditch that awkward factory rake without breaking the bank need this Supreme Suspensions leveling kit immediately. By installing these T6 billet aluminum spacers, you can instantly boost your ground clearance and clear the way for much larger, custom wheel and tire setups. The installation is surprisingly straightforward, typically taking only one to two hours, though you should definitely schedule an alignment afterward to keep your handling sharp. It is a massive visual upgrade for your Silverado or Sierra that makes the stance look aggressive and purposeful. Just be sure to double-check your specific trim. This kit won't work with TrailBoss, AT4, or any vehicles utilizing air-ride or adaptive suspension systems.

After weeks of use, the aggressive stance of my Dodge Ram 1500 has completely transformed from a standard work truck into a true standout. This PRO-Billet leveling kit provides that much-needed 2-inch lift to clear larger, custom wheels without the headache of complex modifications. The bolt-on installation is surprisingly straightforward, taking only about an hour or two if you have basic tools on hand. Just keep in mind that the lift height isn't a perfect 1:1 ratio with the spacer thickness, so you'll want to measure your ride height once it's installed to confirm your results. It’s a solid, reliable way to gain ground clearance while benefiting from a lifetime warranty that actually gives you peace of mind.

The Supreme Suspensions T6 Billet Aluminum Lift Kit delivers a commanding stance for your Chevy or GMC truck through a precise 3-inch front and 2-inch rear lift. This kit is a game-changer if you want to clear larger custom rims and tires without a complicated overhaul. The bolt-on design makes the installation manageable within a few hours, though I highly recommend upgrading to aftermarket Uniball upper control arms to prevent premature ball joint wear. It is important to note that this won't work on vehicles with air-ride or self-leveling systems, and you should definitely get an alignment immediately after installing. Plus, the included dual-sided microfiber towel is a surprisingly handy bonus for cleaning up the workspace or detailing your freshly lifted rig.

Most SUV owners settle for a stock, low-slung stance that limits off-road potential, but this Supreme Suspensions kit transforms your ride into a more aggressive, capable machine. By utilizing T6 billet aluminum spacers for both the front struts and rear coils, you gain a substantial 2.5-inch lift that clears more ground and makes room for larger, custom tire setups. The installation is relatively straightforward, typically taking a few hours, though you should definitely get an alignment afterward to keep everything straight. It is worth noting that the spacer thickness doesn't translate to a perfect 1:1 lift ratio, so keep a tape measure handy to verify your new ride height. They even throw in a branded neoprene can cooler to keep your drinks chilled while you work.

After weeks of use, the aggressive stance of my Chevy Silverado has completely transformed from a standard factory look to something much more commanding. This Supreme Suspensions kit provides a solid 2-inch front lift that clears out enough room for larger, custom tires without needing a massive overhaul. The T6 billet aluminum spacers feel incredibly durable, and the installation is straightforward enough to tackle in a single afternoon. Just keep in mind that the lift height isn't a perfect 1:1 ratio with the spacer thickness, so you'll want to measure your ride height once you're finished. It is a smart, cost-effective way to increase ground clearance and level out that front-end rake while getting a nice little microfiber towel included for the post-install cleanup.

Truck owners looking to ditch that awkward factory rake without breaking the bank need the Supreme Suspensions 3" Front Leveling Kit immediately. This T6 billet aluminum setup transforms the stance of your 2007-2023 Chevy Silverado or GMC Sierra, providing the necessary ground clearance to finally clear those larger custom rims and aggressive tires you've been eyeing. Installation is surprisingly straightforward, typically taking just one to two hours, though you should definitely schedule an alignment afterward to keep your geometry dialed in. It is a heavy-duty solution for 2WD and 4WD models, and the inclusion of a dual-sided microfiber towel is a clever little touch for cleaning up the workspace or detailing your truck once the job is done. Just ensure your specific trim isn't a TrailBoss or equipped with adaptive air suspension before ordering.

That awkward, nose-down rake on Chevy and GMC trucks often makes them look unbalanced and limits your ability to run beefier tires. This Supreme Suspensions leveling kit solves that by utilizing T6 billet aluminum lower strut mount spacers to provide a 1.5-inch front lift. It is a relatively quick project, typically taking about one to two hours to install, which immediately improves your ground clearance and stance. Just keep in mind that the spacer thickness doesn't translate to a perfect 1:1 lift ratio, so you'll want to measure your ride height before and after to confirm your results. It is a smart, budget-friendly way to prep your Silverado, Tahoe, or Yukon for larger custom rims without a massive overhaul.

The aggressive stance of your truck transforms the moment you roll out of the garage with this 3.5-inch front and 3-inch rear lift installed. This kit is a game-changer for owners of 2007-2019 Chevrolet Silverado and GMC Sierra 1500 models looking to clear larger, custom tires without sacrificing stability. While the installation is relatively straightforward, taking a few hours of focused work, keep in mind that you should definitely upgrade to aftermarket Uniball UCAs to prevent premature ball joint wear. It is also vital to verify your factory rear block size if you own an LTZ or Z71 trim. Beyond the massive boost in ground clearance, the inclusion of a dual-sided microfiber towel makes the post-install cleanup surprisingly convenient.

The Supreme Suspensions Lift Kit delivers a commanding stance for your Chevy TrailBlazer or GMC Envoy through a precise 3-inch front and 2-inch rear lift. This kit is a game-changer if you want to clear larger custom rims and tires without a massive overhaul. It utilizes high-quality aircraft billet strut spacers and spring spacers for a robust build. Installation is a straightforward bolt-on process that typically takes a few hours, though you should definitely get an alignment afterward to keep everything running smoothly. Just keep in mind that if you own a Trailblazer EXT or Envoy XL, you will need extended rear shock absorbers to complete the setup. It is a reliable way to boost ground clearance while enjoying the peace of mind that comes with a limited lifetime warranty.

Most people assume a lift kit requires a massive overhaul of your vehicle's geometry, but this leveling kit proves you can gain significant ground clearance without a complete suspension rebuild. The T9 aircraft aluminum spacers provide a much-needed 2-inch lift to the rear, instantly correcting that awkward rake and opening up the wheel wells for larger, custom rims. While the installation typically takes about one to two hours, you will definitely want a spring compressor tool on hand to make the process smoother. It is a straightforward way to improve your truck's stance and capability. Just remember to schedule an alignment afterward to keep your steering crisp, and enjoy the bonus microfiber towel for cleaning up any workspace dust during the job.

Supreme Suspensions delivers a rugged, high-clearance solution for GM enthusiasts looking to transform their Tahoe, Yukon, or Suburban with a professional stance. This kit utilizes T6 billet aluminum for both the 3-inch front strut spacers and 2-inch rear spring spacers, ensuring the hardware can handle the increased load of larger custom rims and tires. While the spacer thickness isn't a 1:1 ratio due to the altered lower control arm angle, the resulting lift provides the aggressive ground clearance you're after. Installation is relatively straightforward, typically taking about one to two hours, though you should definitely schedule an alignment immediately afterward to account for the new strut geometry. It is a complete package that even includes a branded microfiber towel for cleaning up after the job.

You finally traded in those stock, low-profile tires for a set of aggressive custom rims, but your Silverado still sits with that awkward, nose-down rake. This Supreme Suspensions leveling kit solves that exact problem by providing a 2-inch front lift that levels out your stance and clears more room for those larger wheels. Installation is surprisingly efficient, typically taking about one to two hours, though you should definitely schedule an alignment immediately after to keep your strut geometry dialed in. It is a massive visual upgrade for any 2007-2023 Silverado, Sierra, Tahoe, or Yukon owner looking to increase ground clearance without a full suspension overhaul. Plus, the included dual-sided microfiber towel is a clever little bonus for cleaning up after the job or detailing your newly leveled ride.

Your Silverado finally loses that awkward factory rake the moment you swap the stock setup for this 3.5-inch leveling kit. I noticed immediately that this isn't just a simple spacer job. By combining T6 billet aluminum top mounts with high-density Delrin bottom spacers, Supreme Suspensions addresses the geometry changes that usually ruin a truck's ride. The inclusion of a differential drop kit is the real MVP here, as it brings your drivetrain back to OE specs to kill those annoying vibrations often caused by lifting. It provides the necessary clearance to run much larger, more aggressive tires without sacrificing the security of your suspension. Just remember to grab an alignment right after you finish the install to keep everything dialed in perfectly.

Your truck’s rear end instantly sheds that awkward, saggy look the moment these high-density Delrin spacers are in place. I love how this kit transforms the stance of a Chevy Tahoe or Dodge Ram by providing a much-needed 2-inch lift that opens up room for beefier tires and custom rims. The installation is surprisingly straightforward, typically wrapping up in about an hour or two, though you'll definitely want a spring compressor tool on hand to make the job smooth. It is a practical way to increase ground clearance without a massive overhaul. Plus, the included neoprene can cooler is a clever, unexpected touch that actually comes in handy while you are working in the driveway.

Most people assume a suspension lift requires a weekend of grueling labor, but this kit is surprisingly approachable for a DIY enthusiast. The Supreme Suspensions 2.5-inch leveling kit transforms the stance of your TrailBlazer or Envoy by providing much-needed ground clearance and room for larger, custom tire setups. It is a straightforward bolt-on solution that typically takes only one to two hours to install, though you should definitely grab an alignment afterward. The high-strength steel construction feels incredibly robust, and the included limited lifetime warranty offers real peace of mind. They even throw in a 3mm neoprene can cooler to keep your drink cold while you work, which is a clever, practical touch for any garage project.

Dodge Ram owners with 2WD models who are tired of that awkward factory rake absolutely need this leveling kit to finally achieve a commanding stance. This kit utilizes T6 billet aluminum to provide a solid 2.5-inch front lift, which is a game-changer if you are looking to clear larger, custom tires without a massive budget. While the spacer thickness doesn't translate to a 1:1 lift ratio, the increase in ground clearance and improved aesthetics make it a worthwhile upgrade for your truck. The installation is straightforward, typically taking between two to four hours, though you should definitely have a coil spring compressor on hand to make the job smoother. It even throws in a dual-sided microfiber towel to help you clean up the workspace or detail your rig once the heavy lifting is done.