Best Standard Motor Products Air Valve Valves in 2026

Relief pressure preset to 125 psi with flow rate of 116 cfm

1/4" male NPT threaded inlet connection

Brass construction and stainless steel spring for corrosion resistance

Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim)

Can be tested using flush plug with air (200 psi) or water (300 psi)

Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws

Choice of Connections: Fast and easy installation without adaptors reducing leak points. Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub-outs

Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water

Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation

Quality Materials: Full Port Heavy Duty 1" Ball Valve is made of high quality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden.

Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃～120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles.

Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open.

Choice of Connections: Fast and easy installation without adaptors reducing leak points; Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs

Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water

Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Swing check valve size: 3/4 inch NPT female x female threaded.

Swing check valve material: stainless steel 304, suitable for full range of liquids and gas, water, air and some corrosive liquid.

Check valve working temperature: -60℉ to 450℉(-51℃ to 232℃);max pressure:200 Psi for water, oil, gas (WOG200).

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

D: .6'', L: 2.4'' - See Drawing for Dimension References

Fluid Temp Range: -20°F to 302°F, Use for water, oil, air, gas, Light Acids/Alkali

Stainless Steel Spring-Loaded, Low Cracking Pressure (~5 Psi)

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

EXCELLENT MATERIAL: This air check valve is made of high-quality stainless steel, with stable performance, not easy to rust, and good air tightness.

BSPP FEMALE THREAD: This air check valve has a precision BSPP internal thread, which is easy to connect and does not slip.

SIMPLE INSTALLATION: This is an easy to install and disassemble hexagonal internal thread air check valve, which can be used for water pipe connection.

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

STATE-OF-THE-ART SMART WATER CONTROL: integrated commercial-grade motorized valve and wireless controller, LoRa-based smart home industry's longest (1/4 mile open-air) range, no reliance on WiFi, immune to power outages, battery-powered (up to 3 years between changes), device-to-device pairing, smartphone remote status and control.

AUTOMATIC WATER SHUT-OFF when you add and pair YoLink water leak sensors, the water will automatically be shut off upon the detection of a leak. Our patented Control-D2D device-to-device pairing, over our LoRa-based wireless network, allows for devices to be paired to each other, in such a way they will continue to operate, even if WiFi is flaky, the internet goes down, or the AC power goes out!

DEVICE INTEGRITY MONITORING: 24/7 cloud server device supervision monitors the smart valve for online presence, signal strength and battery level, to ensure it will work when you need it!

D: 8'' l: 2.8'' - see drawing for dimension references

Fluid temp range: -20°f to 302°f, use for water, oil, air, gas, light acids/alkali

Stainless steel spring-loaded, low cracking pressure (~5 psi)

Valve Material: Stainless Steel 304, Connection:Clamp

Flange OD:50.5MM

Actuator: Max air pressure: 700 kpa (7 bar); Temperature Range: -25 ℃ to + 90℃

Valve material: SUS 304 Stainless Steel; Connection: Clamp; Port thread size: 2"

Operation: Pneumatic; Control Method: Single acting, Automatic Return Position; Operating range: 0-90°

Air Supply Pressure: 5bar-7bar. 72psi-102psi

Valve Material: Stainless Steel 304, Connection:Clamp

Flange OD: 64 MM

Actuator: Max air pressure: 700 kpa (7 bar); Temperature Range: -25 ℃ to + 90℃

【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak.

【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent.

【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid.

Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.

This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.

This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.

Valve material: SUS 304 Stainless Steel; Connection: Clamp; Port thread size: 1.5"(Φ38)

Operation: Pneumatic; Control Method: Single acting, Automatic return position; Operating range: 0-90 degree

Work Pressure: 0-1.6MPa / 232psi; Applicable Temperture: ≤176℉;

Air Valve Knob Fits trucks with knobs that are screw on style

This Air Valve Knob Will not fit trucks that use pin style

Surface Finish: Chrome

110/120 VAC, 50/60 Hz 7 VA / 9 VA, Normally Closed (Valve opens when energized)

Working media: Air, Gas, Liquid, Water / Direct Lift Piston, Normally Closed

Single Direction / PA66 Plastic Body / Viton Seal / Stainless Steel Armature and Spring & Plunger

IAC MOTOR FITMENT-Idle Air Control Motor fit for 2003-2004 for Subaru for Baja 2.5l, 1999-2004 for Subaru for Forester 2.5l, 2002-2004 for Subaru for Impreza 2.0l, 1999-2001 for Subaru for Impreza 2.2l, 1998-2004 for Subaru for Impreza 2.5l, 1999 for Subaru for Legacy 2.2l, 1999-2004 for Subaru for Legacy 2.5l, 2000-2004 for Subaru for Outback 2.5l, 2001-2004 for Subaru for Outback 3.0l

PREMIUM QUALITY-The bearing assembly is manufactured from high quality stainless steel to ensure precise matching, durability, reliability and superior performance.The bearing assemblies are made of high quality stainless steel with precise positioning and a small coefficient of friction. Minimizing the noise in the time of using, helping to extend the life of the control valve

MAIN FUNCTION -The function of the idle speed control valve is to automatically control the air supply under idle conditions according to the engine operating temperature and load, and maintain the engine to run at a steady idle speed.

Rated Voltage: 24V DC; Connection Size: 1/2”NPT;

Constructed with 304 stainless steel, this electric valve is very durable and leak resistant, anti-rust, high temperature and pressure resistant.

This valve has a seal made of VITON, resistant to high temperatures and corrosive chemicals, can be used for drinking water, and other liquid projects such as skerosene, gasoline, diesel and natural gas, air etc.

☞ 1"/1.5"/2" stainless steel 304 sanitary three-way T-type three-clamp pneumatic ball valve.

☞ Suitable for stainless steel pipe system.

☞ Suitable for food, beer, dairy, brewing, pharmaceutical, chemical industry drainage and other industries.

IAC MOTOR FITMENT-Idle Air Control Motor for controlling fit for 2002 for Cadillac Escalade/ Escalade EXT, 2000-2002 for Chevy Camaro, 1999-2002 for Chevy Silverado 1500/ 2500, 2001-2002 for Chevy Silverado 2500/ 1500 HD/ 3500, 2000-2002 for Chevy Suburban 2500/ Tahoe, 1999-2002 for GMC Sierra 1500/ 2500, 2001-2002 for GMC Sierra 1500/ 2500 HD/ 3500/ Yukon XL 1500, 2000-2002 for GMC Yukon/ Yukon XL 2500, 2000-2002 for Pontiac Firebird, 2004 for Pontiac GTO

PREMIUM QUALITY-The bearing assembly is manufactured from high quality stainless steel to ensure precise matching, durability, reliability and superior performance.The bearing assemblies are made of high quality stainless steel with precise positioning and a small coefficient of friction. Minimizing the noise in the time of using, helping to extend the life of the control valve

MAIN FUNCTION -The function of the idle speed control valve is to automatically control the air supply under idle conditions for According to the engine operating temperature and load, and maintain the engine to run at a steady idle speed.

Fitment - Idle Air Control Valve Compatible with Honda CIVIC(1996-2000),CIVIC DEL SOL(1996-1997)

Idle Air Control Valve IAC Valve OEM Part Number - 16022P2AJ01, 36460P2AJ01

Working Principle - When the operating temperature and load of the engine change, the idle speed control system allows the ECU to control the air supply at idle speed in order to maintain stable engine idle speed, keep engine idle speed to a minimum, and reduce fuel consumption