Best 7 Inch Angle Grinders in 2026

7-amp motor generates up to 11,000 RPM

Lightweight design combined with the rubber grip lining for maximum comfort

Arbor adapter allows grinding wheels with both 5/8 and 7/8-inch arbors

Metabo safety switch prevents unintentional start-up

Tool-free adjustable guard; twist-proof

Metabo vibratech (mvt): integrated damping system and side handle to reduce vibrations in order to protect the user's health

Delivers the power of 15 Amp corded large angle grinder

Tool free accessory changes and guard adjustments

Brushless Motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance

High power 4 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load

Epoxy coated field and armature of the metal grinder provide long service life against abrasion from airborne debris

DEWALT angle grinder comes with a low-profile gearcase allowing for work in tight areas

【Compatibility】The Angle grinder dust shroud suitable for the front cover of most 70-76mm angle grinders. Dust Shroud can be installed on most 7" angle grinders. Compatible with Hitachi, Makita, FLEX, METABO, HILTI, BOSCH, Kress, FESTOOL, STANLEY, Milwaukee Etc. most Main Brands.

【Ring Brush 】 Dust shroud for the angle grinder has a ring brush on the edge. Even if the dust cover is not completely flat or the polished surface is not smooth, moving the dust cover can make you work normally, which can effectively prevent dust from escaping.

【Design with buckle】This grinder dust shroud is designed with a push and pull buckle, easier to loosen and tighten, easy to operate and saves time .

Quick clamp swing angle：0 degree - 45 degree

Appr. Size: 9 1/2in(L) * 7 1/2in(W) * 11in(H)

Material: Aluminum, cast iron

【2PCSx21V 4.0AH Batteries】 Cordless Angle Grinder is equipped with two 21V 4.0Ah large-capacity lithium battery and a fast charger that has been tested for multiple charging cycles, with charge and discharge protection, which means grinders power tools full day of operation is perfectly feasible. Don't worry about running out of power at work.

【Cordless Design 】 Cordless eliminates the trouble of the winding cables and gives great convenience to carry around, which is suitable for indoor and outdoor use.

【Super Power Up to 9000RPM】 21V Angle grinder brushless motor provides up to 9000RPM for a wide range of applications such as grinding metal, rust removal, metal/steel cutting. High-power brushless motor has longer use life, Stronger motivation smaller loss of battery energy,lower machine running noise level and much safer working conditions

Material: forged from high hardness A3 steel, with high hardness, strong toughness, wear resistance and long service life. Part of the handle is wrapped in PVC rubber, which is soft and comfortable.

Size: length: 195mm

Application: Universal for 4-inch, 5-inch, 6-inch, 7-inch and 9-inch angle grinder.

Powerful 15.0 AMP motor delivers 8,500 RPM for faster material removal

Spiral bevel gears for smoother rotations and a more efficient transfer of energy

Labyrinth construction averts debris from penetrating the motor, bearings and gears for longer tool life

【Compatibility】The Angle grinder dust shroud suitable for the front cover of most 48-50mm angle grinders. Dust Shroud can be installed on most 5" angle grinders. Compatible with Hitachi, Makita, FLEX, METABO, HILTI, BOSCH, Kress, FESTOOL, STANLEY, Milwaukee Etc. most Main Brands.

【Ring Brush 】 Dust shroud for the angle grinder has a ring brush on the edge. Even if the dust cover is not completely flat or the polished surface is not smooth, moving the dust cover can make you work normally, which can effectively prevent dust from escaping.

【Design with buckle】This grinder dust shroud is designed with a push and pull buckle, easier to loosen and tighten, easy to operate and saves time .

[Powerful & Durable] The DCK angle grinder is a versatile power tool that can handle a variety of projects, such as grinding, cutting, polishing, and production welding. You’ll be amazed at its powerful 6.7 amp motor that spins 4-1/2-inch grinding wheels at speeds up to 11,800 rpm. The 6.7 amp motor and sturdy gear ensure the durability, a longer lifespan of the power angle grinder, and higher performance. Ideal for metalworker, plumber, and other professionals who use grinders on a daily basis.

[Safe & Convenient Design] The DCK professional angle grinders have important functions for construction site safety. The lockout switch has a lock/unlock function for easy operation, which turned out to be a big plus. The spindle lock makes changing accessories easy & safe. In addition, the corded angle grinder comes with 2 different types of safety guards and the adjustable design makes it more convenient to adjust to better protect the user from flying debris during cutting and grinding.

[Compact & Ergonomic Design] The DCK angle grinder weighs only 4.4lbs and has a compact body. It is a true lightweight angle grinder. Feature with an ergonomic 2-position side handle that fits perfectly in your hand thanks to its slim design. This means that the angle grinder can be used for a long time and experience less fatigue. The handle can be mounted on both sides, making it friendly to both left and right hands.

Type 1 guard for DeWALT 7" angle grinders.

7" guard allows for use with cutting wheels

Includes: Guard, D284932 Flange Set, Wheel Wrench

【Efficient Brushless Motor】BSK-118 cordless angle grinder equipped with highly efficient brushless motor which requires no carbon brushes, works for longer life. It can deliver up to 5600 RPM for most applications such as cutting, polishing and grinding of metal, brick, tile and wood.

【2* High-Power Battery & 3.0A Charger】20V 4.0Ah large capacity li-ion battery applies electronic control, which provides larger capacity and longer life. Both batteries can be fully charged in 1.5 hrs at the same time with our protective 3.0A dual charger. The batteries and charger apply to all Berserker lithium projects.

【Easy to Operate】This 10.2lbs (with batteries) cordless angle grinder allows you to operate easily without wire chaos or cable restriction. By pressing the spindle lock, you can complete wheel change to fulfil your requirements easily and quickly. There is also a tool bag for storage as well as carrying around.

Made in Germany

World Class production facilities and techniques

Absolute focus on quality by our employees at every Stage of production

UNIVERSAL FIT DUST SHROUD- suitable for angle grinder 4-1/2''/5" under main brand Hitachi Makita Milwaukee Craftsman, etc., reduce and prevent dust leakage during operation and create a dust-free comfortable working environment

DIAMOND GRINDING CUP - high strength diamond blade, good for grinding on different surfaces, ex. concrete, marble, floor, tile glue, wall, granite

STANDARD VACUUM VALVES - the vacuum cleaner hose adapter fits most vacuum cleaner connections, easily connected without other accessories

Powerful Motor: Our angle grinder is equipped a powerful 7 Amp 12000 RPM motor. It will meet most job requirements, such as cutting and grinding metal, stone, wood, plastic and other materials. Ultra-secure Design: The 360° rotational guard redirects the sparks away from the user and eliminates the danger of accidentally touching the wheel with your fingers. The paddle switch ensures emergent shut-off.

This angle grinder is designed for maximum efficiency and convenience, with a comfortable grip and easy-to-use controls. It also features a dust-proof switch to keep your work area clean and a spindle lock for quick and easy wheel changes. The grinder is also equipped with a safety guard to protect you from sparks and debris. With its powerful motor and adjustable speed settings, this angle grinder is perfect for tackling any job.

motor uses all-copper high-quality magnets.has a longer life,with fast cutting and grinding capabilities.Use it for cutting or grinding! the guard can be adjusted/positioned quickly and easily with a light screw.offers comfort and control during extended use Improved air path deters dust and minimizes electronic issues associated with dust and debris New design adjustable left and right auxiliary handle with rubber pad for comfortable operation and more comfortable operation Adjustable guards allow 360-degree rotation to accommodate the different positions required

Wet Air Grinder/Sander 7000 RPM

Center water feed function reduces dust

7" metal splash guard is included

Dynabrade'S 7 Hp Die Grinders Are Ideal For Rapid Material Removal, Deburring, Finishing And Polishing, In An Ergonomic Right Angle Design

All Models Include 1/4-Inch And 6 Mm Collet Insert

Thermal-Insulated Handle Reduces Cold Air Transmission To Operator

RIDGID 7 in. Angle Grinder features a powerful 15 Amp motor

[Universal type] It can be used for more than 90% of mainstream brands of 7inch angle grinders such as Mivo, Dewalt, Mai Taibao, Hitachi, Bosch, Makita, Kress, Milwaukee, etc.

[Function] Remove resin, rubber, paint and other surface attachments to level uneven surfaces on the ground, remove glue and other adhesives remaining after the carpet, polish cement, stone and concrete, control dust and reduce cleaning time Wait.

[Specifications]-Material: nylon + PVC; wheel diameter: about 8.5 inches; wheel inner diameter: 7 inches; connector diameter: 2.6 inches; hole diameter: 3.1 inches; positioning ring diameter: 2.8 inches.

Best in class power-to-weight ratio - lowest weight of any 4-Hp large angle grinder

New vibration control Side and Main Handles - 50-Percent vibration Reduction

8,500 RPM- optimized for 7-Inch wheels - up to 20-Percent longer wheel life than 6,000 RPM

Material: Made of hard carbon steel.

Features: Strong, wear-resistant, good heat dissipation.

Package: 2pcs Inner angle grinder flange nuts, 2pcs Outer angle grinder flange nuts.

Adjustable shoe provides easy depth-of-cut adjustment

Plunging system helps improve dust collection when starting and finishing the cut

Outer blade guide indicates blade direction for a precise cut

UP TO 30% MORE TORQUE** when compared to DCG418 using DCB609

BUILT FOR SAFETY WITH E-CLUTCH® that immediately shuts down the motor when a pinch/stall is detected

AVOID DAMAGE AND INJURY with kickback brake™ that engages when a bind-up event is sensed

Aluminum alloy housing

Rubber handle grip

1.1 HP (850 W) high performance motor

NO LOCK-ON PADDLE SWITCH - provides rapid shutdown of the motor after the switch is released.

ERGONOMIC, POWERFUL GRINDER DESIGN – engineered with the X-LOCK mount, a narrow grip zone and light weight but with pro power

X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster

Dust Collection: Reduces clean-up time and provides cleaner, safer air for user

Large, Durable Foot Plate: Greatly increases stability during use for clean and accurate cuts

Single screw depth adjustments: Quickly adjusts and maintains desired depth of cut

Designed for Collecting Dust/Debris When Using A High-Speed Angle Grinder

Perfect for Perfect for Grinding and Sanding or Surface Preparation Work. Accepts 7-9 inch Diameter Blades.

Can Grind Tight Against The Wall. Easy Installation and Wheel Changes. Rugged Construction for Heavy-Duty Applications.

【Easy To Install】Easy to install and use, can collect up to 99% dust in the air.

【High Quality Material】Made of high quality material, durable with long life.

【PU Leather Ring】PU leather ring is placed around the dust collector cover to enhance sealing, so that the dust will not overflow.