Best Cs Osborne Arch Punches in 2026

Steel blades can be resharpened

Durable long lasting tool

Comfortable grip

HOLE PUNCH TOOL SET: Built-in center punch/pilot tip in drive handle features a textured knurled surface to support a firm grip for easy and accurate positioning to execute clean cuts and holes.

PRECISE GASKET MAKER: Precisely machined and heat-treated blade hollow puncher with alloy steel construction resists corrosion and keeps blade sharp to provide excellent cutting performance

LEATHER PUNCH SET: Multi-applicable gasket cutter and is most ideal on vinyl, leather, plastic, rubber, copper, soft material, gaskets, cardboard, and many more materials.

1，Corner Rounder Punch 3 in 1  ： Cuts 4mm 7mm 10mm Corner Radiuses，Create perfectly finished paper crafts or scrapbooks with 3-way corner cutter.

2，meterial is ZBS+Zinc alloy，Stainless steel cutter blade is sharp enough for ensuring precision cutting for a neat and clean appearance.

3，Easy to Operate and Simple to Use: Choose your desired material and place it into the slot. Simply push the corner of your paper inside until its properly lodged against the guides and press the handle down. The corner is now accurately and sharply rounded.

ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set; This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material; typically around 1/16-inch to 3/8-inch)

EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool; Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material; The pin point is spring-loaded and retracts into handle when punching a hole; Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin

BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue and more productivity

Gasket hole punch set made of heat treated carbon steel for long-life sharpness and durability

The hollow punch set applied for punching holes on gaskets, leather, canvas, plastic, vinyl, rubber and other soft materials

12 individual leather punch sizes (inches):1/8’’, 5/32’’, 3/16’’, 7/32’’, 1/4’’, 9/32’’, 5/16’’, 3/8’’, 7/16’’, 1/2’’, 5/8’’ and 3/4 ‘’

The GENERAL TOOLS and instruments 1280M hollow steel punch, 1/2" Is meant for punching a 1/2" hole

The punch works on leather, rubber, gasket material, cardboard and softer metals

The internal punch features a side Clearance hole for easy removal of punched material

-Material: Made of drop forged, heat treated steel for long-life sharpness and durability.The surface of the hollow punch cutter tools are coated with oil to prevent rust.

-Hole Punch Set Size: 10Pcs different size round hollow leather hole punch: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm.

-Widely Use: Hollow punches can be aplied for making clean holes in gaskets, leather, plastic, rubber, vinyl, cloth and other soft materials, available in leather craft, clothing, handbags, canvas, belts, jacket etc.

【Includes】: 1 pinpoint punch shaft, sturdy ABS molded case, hollow hole punch set head 13 sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" (5mm, 6mm, 8mm, 10mm, 11mm, 13mm, 16mm, 19mm, 22mm, 25mm, 28mm, 32mm, 35mm)

【Wide Application】: Make clean, precise holes in Leather, Copper, Plastic, Rubber and Cork. Hollow punch set tips let you choose different size holes from 3/16" to 1-3/8". Gasket cutter tool accurate washers and gaskets

【High-Quality Materials】: Strong heat treated steel gasket punch set which is suitable for repeated use and has high strength and long service life; Soft, comfortable grip

the 3-hole paper punch allows you to finish paper punching within seconds, a real time-saver

Adapter is available in the package for powering,

the electric hole punch can neatly punch 30 sheets paper at a time using the adjustable paper guide

Heavy duty heat treated carbon steel construction

Included zipper close carrying case to keep hole punch sizes organized

Set includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm

【Package Contents】The gasket punch set includes 1 storage box, 1 needle-point punch shaft, and 13 punch head sizes, including 3/16” (5 mm), 1/4 ” (6 mm), 5/16 ” (8 mm), 3/8 ” (10 mm), 7/16 ” (11 mm), 1/2 ” (12.5 mm), 5/8 ” (16 mm), 3/4 ” (19 mm), 7/8 ” (22 mm), 1 ” (25 mm), 1-1/8 ” (28 mm), 1-1/4 ” (32 mm).

【Built-In Central Punch】The center point of the head of the handle is retractable, allowing you to find the same center of the circle when you punch the second time, making your washer more precise and not out of position.

【How to Make a Washer】This hollow punch set can punch regular round holes through the positioning of the center punch. When you make a washer, You need to punch in two times, First punch out the outer diameter, Then change to the inner diameter punch, Find the center point of the first time, and punch out the inner diameter again (Find P.5). Diameter from 3/16” (5mm) to 1-1/4” (32mm).

Made in France

1 1/2" Hollow Punch

Wide array of sizes available for numerous ID and OD configurations

MATADOR fastening tools, Since 1900 certified Erstlieferant the automotive industry, tested and proven industrial quality

Material: C-35 / C 45 / surface: varnished red

Over 8,000 tools for professional users

※ This Leather Hole Puncher is a Heavy Duty Leather Stamping Machine for DIY Leather Craft Punching Holes, Mainly Aimed at Leather Handcraft Workers for Punching, Pronging and Stamping Process. Equip with Drill Chuck, Various tools can be fixed to achieve the functions you need.

※ Compared to other punching machine of the same shape on the market,We upgraded the material of the equipment base to ductile iron, which is stronger and more durable than ordinary cast iron base, reducing the risk of fracture. We use solid round steel cylindrical mandrel presses, which is more durable, not deformed, and not loose compared to the empty tube columns sold on the market. Long-term use maintains good accuracy.Maximum pressing pressure: 160 kg.

※ We offer 2 different punching machines, round and square. There are 4 versions with accessories and without accessories, and the price is different. Please make sure before ordering to prevent wrong purchase.The square punching machine adopts a widened rack to increase the strength and improve the downforce. The circular punching machine is equipped with a guide groove to increase the accuracy and improve the accuracy of repeated use, and it is not easy to deviate.

To DIN 7200 Form A

For stamping out cardboard, leather, rubber, sealing materials and other soft materials

Cutting edge hardened

Used for punching round holes in gasket material, rubber, canvas, cardboard, plastic and other soft material

Special design of cutting edge prevents jamming of material inside the punch

Cutting edge is induction hardened for extended life

Additional sizes available upon request

Inside taper permits the punchings to clear easily through the barrel

Punches have fully polished barrel and black enamel handle

HAND TOOLS

Country of Manufacturer: United States

Manufacturer: C. S. OSBORNE

HGH HARDNESS STEEL: Made of premium steel material, special process treatment, high hardness and good wear resistance

SHARP CUTTING EDGE: The hole punch tool has good sharpness of cutting edge with fine grinding, sturdy and durable

7 SIZES: There are 7 different sizes of punch head to meet your diverse needs, including 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm

C.S. OSBORNE-149-3/16-3/16" ARCH PUNCH

Country Of Origin: United States

Product Type: Sporting Goods

Item Package Dimensions: 5.6" L X 1.9" W X 1.4" H

Extra Wide Side Guides make Seating your Item Simple and Efficient

Has large steel cutting blade to reduce user effort

Capable of punching up to 75 mil PVC cards

OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.

Stock Varies by Warehouse - Please Refer to Estimated Delivery Time for Most Accurate Shipping Info

Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.

The shape is accurate and we provides different sizes to meet you needs.

The blade is incisive and neat through which you can cut the leather quickly.

We provides a box for your to store the punchers,portable and convenient to carry.

HAND TOOLS

Country of Manufacturer: United States

Manufacturer: C. S. OSBORNE

C.S. OSBORNE-149-3-3/8-3-3/8"DIA. ARCH PUNCH