Best Partsw Arms Control in 2025

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and helps to inhibit wear, salt, road grime and oils

COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and helps to inhibit wear, salt, road grime and oils

Universal Monitor Arm: MOUNTUP monitor desk mount perfectly fits most LCD LED flat or curved computer screens up to 32 inches, holds 4.4-17.6 lbs, suitable for VESA patterns of 75x75mm & 100x100mm. Compatible with ASUS, Acer, Samsung, LG, HP, AOC, Dell, Lenovo, etc., including but not limited to 32 30 28 27 25 24 23 22 21 20 19 17 inch screen.

Full Motion Monitor Stand: This single monitor arm offers a wide range of movement. Supports screen rotates 360° for landscape or portrait orientation, swivels 180° to share your display, and tilts up 90°/down 45° for better viewing. The arm can extend up to 19.27" long, and rise up to 16.3" in height. Easy to find the right viewing angle and position.

Easy To Assemble: Our monitor VESA desk mount is easy to install with a drill-free c-clamp(desk thickness within 0.39''-1.97'') or grommet base mount(desk thickness within 0.39''-3.15'', hole diameter within 0.39''-2.36''). If the thickness of your table is not within this range, please relate with us for suitable C-clamp. Comes with clear manual and mounting hardware needed. Less than 15 minutes from opening box to use.

CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.

HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it

Product 1: Give your vehicle the Perfect Blend of Performance and Stability from Rough Country.

Product 1: Improves Control and Handling.

Product 1: Reduces "bump steer" and Vibration | Added Life to Tires, Ball Joints, and other Steering Components.

Replacement for 1999-2004 Jeep Grand Cherokee

Kit Includes: 2x Rear Lower Complete Control Arm Assembly

Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for lower friction and long life

GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris

KEEPS DIRT AND WATER OUT -- Pre-installed boot shield socket components from wear-causing debris

Direct replacement - this suspension trailing arm fits and functions like the original equipment part

Quality construction - manufactured from same materials as original equipment for safety and reliability

Durable - protective finish for long-lasting corrosion resistance

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates

CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.

HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils

LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it

HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and helps to inhibit wear, salt, road grime and oils

QUALITY ASSURANCE -- Laser-etched ID provides visible assurance of genuine MOOG quality

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life

GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants

KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants

Undergo impact, wear, and fatigue testing to help provide quality and durability

Coated to help with corrosion resistance and long life

Painted/E coated to help with rust prevention

Country of Origin : China

Package Weight: 4.831 kilograms

Package Dimensions: 11.43 L x 53.34 H x 13.97 W (centimeters)

Direct replacement for a proper fit every time

Durable steel construction for a longer service life

Secures suspension to vehicle frame

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for lower friction and long life

GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris

KEEPS DIRT AND WATER OUT -- Pre-installed boot shield socket components from wear-causing debris

[Vehicle Fitment]: Compatible with Mercedes-Benz W203 C203 Series - C230 2002-2007 ✔ C240 2001-2005 ✔ C280 2006-2007 ✔ C32 AMG 2002-2004 ✔ C320 2001-2005 ✔ C350 2006-2007 ✔ CLK320 2003-2005 ✔ CLK350 2006-2009 ✔ CLK500 2003-2006 ✔ CLK55 AMG 2003-2006 ✔ CLK550 2007-2009 ✔ --- with 10mm Sway Bar Stud Size and Except 4Matic Model !!!!!

[Installation Position]: Front Left and Right Side

[Ideal Replacement]: This suspension steering kit is replacement for above model's suspension system, and may help you resolve those problems: ① clunking noise ② steering wander ③ uneven tire wear ④ excessive vibration ⑤ poor handling !!!!

FITMENT: Fit for Infiniti QX4 1997-2003, for Nissan Pathfinder 1997-2004

REAR UPPER & LOWER CONTROL ARM: Rear control arm kit improves your car handling and steering, reduces bump steer and prevents premature tire wear, retaining a factory ride quality. Perfect for daily driving and off-roading

HIGH-STRENGTH STEEL: Trailing arms are made of strong steel with a durable coating to prevent rust and corrosion. Premium rubber bushings are preinstalled to reduce vibrations and noise. Directly replace the factory upper and lower arms with an easy bolt-on installation

【Replacement】-Directly replace 2008-2013 Nissan Rogue - [2014-2015 Nissan Rogue Select]

【Confidence】-Totrait is a brand of premium quality parts.Professional manufacturer through ISO9001 qms directly replace OE parts

【Warranty】-2 years unlimited miles qa.24h online team to address your queries

Vehicle fitment: : Please confirm your vehicle details by VIN, and check your vehicle in the fitment filter system before purchase

Package content: 1x Driver side lower control arm, 1x Passenger side lower control arm and 2x pre-greased lower ball joints. Directly replaces OEM #: 51350-SDB-A00, 51360-SDB-A00, 51360-SDA-A03, 51360-SDA-A02, 51360-SDA-A01

Improve ride comfort: Pre-installed rubber bushings effectively help reduce the road noise and vibration, enabling you to enjoy a smooth and controlled ride during cornering and over bumps

Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications

Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor

Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride

Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications

Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor

Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride

Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications

Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor

Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride

Direct replacement - this suspension trailing arm fits and functions like the original equipment part

Quality construction - manufactured from same materials as original equipment for safety and reliability

Durable - protective finish for long-lasting corrosion resistance

【Adapter parts and product installation】 Replace part numbers: 15153958 and 905-208. The package includes 2 front control arm bumpers. Product installation: only need to disassemble and replace the old parts, and then use the tools to install our products in the position that needs to be replaced.

【Fitment】Fit for Silverado, Sierra 1999-2006, Tahoe Suburban, Yukon 2000-2006 and Avalanche Express 2002-2006, Savana 2003-2014, Escalade 2002-2006. For more information on vehicle adaptation, please visit our product description page or contact us at any time.

【Premium material】 This front arm bumpers are made of high-quality materials, crack-resistant design, more durable and will not easily become damaged. Easy to install and easy to use, let you enjoy a better product experience.

Upgraded heavy duty DOM Drawn Over Mandrel USA STEEL tube upper and lower control arms

This is for a set of 4. Includes 2 uppers and 2 lowers. These are sold in a set of 4, as you need uppers AND lowers to re-center your axle properly.

If you've installed a lift, you DEFINITELY need longer control arms. This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. These allow the best tire fitment as it re-centers the axle in the wheel well.

PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for lower friction and long life

GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris

KEEPS DIRT AND WATER OUT -- Pre-installed boot shield socket components from wear-causing debris

🚘APPLICABLE VEHICLES : 1996 1997 1998 1999 2000 For Honda Civic(Power Steering/Excludes SI);

🚘COMPONENTS : 1 X ES2943R Front Right Outer Tie Rod End;1 X ES2946L Front Left Outer Tie Rod End;1 X K90450 Front Upper Control Arm And Ball Joint - Passenger Side;1 X K90451 Front Upper Control Arm And Ball Joint - Driver Side;2 X EV367 Front Inner Tie Rod End;2 X K90123 Front Sway Bar End Link;2 X K9802 Front Lower Ball Joint;

🚘Alternate/OEM Part Number(s): 51220S04003, 51220SO4003, 51220SR0A01, 51220SR3003; 51313SF1000, 52316692010, 90112SE0000, 90112SK7000, SBK90123; 51450S01023, K90450; 51460S01023, RK90451; 53010S04000, 53010S04J5, 53010S04J51, 53010SO4000; 53540SH0A01; 53560SH0A01;

★【Fitment】For 1997- 2000 Acura EL, 1994- 2001 Acura Integra, 1992- 2000 Honda Civic, 1993- 1997 Honda Civic del Sol, 1997- 2001 Honda CR-V; Rear upper control arms driver and passenger Side.

★【Package】2 PCS rear upper control arms left&right RK640286 RK620048. Well packaged and fast shipping.

★【High Quality】Built with premium quality material and multiple tests has been taken to ensure quality and durability. Direct replacement for original equipment, survive your car

Interchange Part Number Number: 68028831AA, 68028831AB, 68028831AC, EV80702; 52013468AB, 52013468AD, 52106710AA, 52106710AB, 52855763AB, 52855763AC, 68141049AA, ES3571, MS25600; 4782665AB, MS25117, K620177; 4782666AB, K620178; 4782717AA, 4895483AA, 4895483AB, K80823; 4782716AA, 4895482AA, 4895482AB, K80822

Package Includes: Both (2) Front Driver & Passenger Side Upper Control Arm & Ball Joint Assembly, Both (2) Front Stablizer Sway Bar Links, Both (2) Front Outer + Both (2) Front Inner Tie Rod Ends

Fitment: Compatible With 300 2005-2010, Challenger 2008-2010, Charger 2006-2010, Magnum 2005-2008