Best Dorman Automotive Replacement Power Steering Pressure Hoses in 2026

Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life

All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime

Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit

Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely

Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Fit Type: Vehicle Specific

Package Dimensions: 1.524 H x 33.02 L x 31.75 W (centimeters)

Package Weight: 0.55 pounds

Direct replacement - this power steering reservoir hose is designed to match the fit and function of the original hose on specified vehicles

Restores functionality - reliable replacement for an original hose that has failed due to heat or vibration

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

√ Condition: Brand new and high quality, well packed

√ Fits Honda Odyssey V6 3.5L 1999-2004

√ If you have a Honda Odyssey V6 3.5L 2005-2007, please go to this item: B01NAO374I

The power steering pressure hose assembly has passed the high pressure quality assurance test before leaving the factory, to ensure that the installation and operation of the new hose are trouble free

The black steering tubing is made of multi layer reinforced rubber and is provided with a layer of highly oil resistant, ozone resistant and heat resistant synthetic rubber coating and tubing assembly are made of steel and black surface anti corrosion coating, with strong corrosion resistance and rust resistance

OEM part number: 53713-SDC-A02,53713SDCA02. Compatible with power steering pressure hose assembly Honda Accord 2.4L 2003 2004 2005 2006 2007, Acura TSX 2.4L 2004 2005 2006 2007 2008

Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit

Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely

Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit

Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely

Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi

Meets Or Exceeds OEM Specs

Factory OEM Fit Form And Function

Edelmann OE quality power steering hoses and components are crafted from long-lasting, high-performing materials that ensure durability under the harshest conditions on the road

OE fit, form, and function ensures ease of installation, correct hose/tube routing and leak free performance

Hose construction withstands internal oil temperatures of up to 300 degrees F and pulsation pressures up to 1,500 PSI, ensuring component integrity in high-heat, high-stress operating environments

Replace # 53713-SHJ-A01 , 53713SHJA01,2647-498147, 5-55172，365543, 92164, 55172, 37238, 37239, 36-365543

Power Steering Pressure Hose Assembly,fits Honda Odyssey V6 3.5L 2005-2007.

Power Steering Pressure Hose Line Assembly for 2005 2006 2007 Honda Odyssey,Construction of Honda Steering Pressure Hose-This Power Steering Pressure Hose Assembly is made by high grade steel and metallic finish by chrome plating, the black steering

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit

Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely

Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi

FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store

A high quality, Direct Fit OE Replacement Power Steering Hose from Evan-Fischer

Power steering pressure line hose assembly; 14mm male inverted flare end 1 diameter; 18mm male captive O-ring end 2 diameter

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Original Equipment fit, form and function

Manufactured from premium raw materials

Premium OE design

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

For port and starboard installation on select MerCruiser stern drives.

Fits from the trim cylinder to the connector block for up pressure.

Stainless steel fittings at ends of braided re-enforced hydraulic hose for durable, long service life.

Garage-Pro Aftermarket Replacement Power Steering Pressure Switch Compatible with 2000-2003 Ford Focus, 2003-2008 Crown Victoria, Fits 2003-2008 Mercury Grand Marquis, Fits 2003-2009 Lincoln Town Car

Garage-Pro JCWREPF381301GP Features: Sold individually, Screw-in; 3/8 Inch x 24 Thread, Connector Gender: Female, Terminal Type: Blade, Terminal Quantity: 2, Terminal Gender: Male

Replaces OE Number: YS4Z3N824EA

Comes complete with factory-installed, pre-bent zinc-dichromate plated end fittings, brackets, sensor ports, sheathing, bushings and grommets

Connection on uncoupled end of return line assembly is made with ordinary worm-drive clamps

Exceeds SAE J2050 performance requirements

TEMPERATURE RESISTANT MATERIALS: Each hose in the Edelmann Elite line features innovative heat/abrasion tubing and is specifically designed to withstand a range of temperatures from polar vortex cold to extreme heat waves

PREMIUM GRADE POWER STEERING EQUIPMENT: Designed to stand up to extreme conditions and rigorous daily wear, our power steering hoses absorb vibrations while reducing noise for quiet yet powerful performance

RUST RESISTANT TUBES: Our high performance hoses have a durable zinc coating that helps prevent rust and corrosion damage; Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity

Original equipment equivalent and withstands internal oil temperatures of up to 300 degrees Fahrenheit

Highly resistant to oil, heat and ozone which cause ordinary assemblies to fail prematurely

Hose assemblies will withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi