Best Ball Nuts in 2026

Fitment: OEM/FACTORY Wheels with a 12x1.5 thread pitch and Mag Seat, Fits Most 5 or 6 Lugs Toyota Oem Wheels, Compatible with Toyota Camry, RAV4, Highlander, Corolla, Tacoma, 4Runner, Prius, Sienna, Lexus IS300, GS450 and more see below for full and exact fitment information.

Specification: Thread pitch m12-1.5, Overall tall 1.46" (37mm), Width 1.2"(30mm) , Closed end, 0.83"(21mm)Hex Wrench, 20 packs. please note carefully it's not fit for vehicles with 60 degree conical seat (also known as cone seat/tapered seat), Ball Seat/Round Seat, Usually aftermarket wheel.

Performance: One-piece structure design, better than original "cap" style (two piece design), which is more safer while you are installing the lug nuts and all of our products past 72 hours salt spray tested which can promise a longer service life compared to 48 hours for others.

【ANTI-THEFT FOR YOUR WHEEL】 -- Special anti- theft design for wheel safety. the tire cannot be removed without our special security key (with both 3/4" (19 mm)and 13/16"(21 mm) HEX )

【HIGH QUALITY】 -- Make of high quality Iron with chrome plated to enhance friction resistance, corrosion resistance, closed end can prevent water vapor from entering

【SPECIFICATION】 --[Thread Size]: 12mm X 1.50 with Conical 60 Degree Seat, 1/2"-20 Thread Pitch [Hex Size]: 3/4"(19 mm)and 13/16"(21mm).!!Note: Please measure your wheel nuts（thread size/length /width etc.）before purchasing

Set of 20 chrome closed end bulge acorn lug nuts 1/2"-20 thread, universal for Dodge, Ford, Jeep, Mazda & golf cart(EZGO, Club Car) etc.

1.38"(35mm) tall, 0.87"(22mm) wide, 3/4" hex

60 Degree conical seat (Not fit mag seat, ball seat and round seat)

FITS: The factory wheels on many Porsche and Volkswagen vehicles. Can also be used some on European cars with stud conversions.

REPLACES: Porsche and Volkswagen factory part numbers 99918200336 and 999-182-003-36.

SPECS: M14x1.50 Thread - Closed End OEM Style - Ball/Radius Seat - 19mm Hex

Measurement: Length: 43mm (1.69”).

Material: solid Stainless Steel, durable and compact.

You can control the height of the beginning and the end string with raising the screws of the nut and get the string height that you need.

14x1.5 Wheel Nuts SPECS: Thread pitch 14x1.5, Overall tall 1.8" (45mm), Hex 7/8"(22mm) , Closed end, 60 Degree conical seat

14x1.5 Conical Seat Nuts: DON'T FIT Vehicles with Mag Seat or Ball Seat/Round Seat, If not sure about your vehicle specs, please contact us with your model detail

Lug Nuts: Aluminum, hexagon stem caps offer heavy-duty protection to ensure stability and protection when driving

Delicious, Rich, and Robust.

Smooth Real Dark Chocolate Coating a Malt Ball Center.

Delivered in a FirstChoiceCandy bag with Ingredients & expiration date label.

IMPORTANT: NOT OEM LENGTH. This is an extended length lug bolt, NOT an OEM replacement lug bolt. NOT to be used without wheel spacers. The correct length will depend on your OEM bolt's length and the spacer's thickness. See Diagram for Measuring Help. MEASURE BEFORE PURCHASING. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.

WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle's bolt thread size, as various years/models come with different size bolts. These are Ball Seat R12 shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.

[SPECIFICATIONS] Pack of 20 - Black Bolts | Thread Size: 14x1.5 | Seat Type: Ball Seat R12 | Shank Length: 37mm (ie thread length).

[Product Type] Hammer Head Drop in T Slot Nuts Assortment Set (Thread Type: M5 ). Product Size: 1x0.6x0.4cm/0.39x 0.24x 0.16inch(L x W x T). Please confirm the correct size before purchasing.

[Material] Made of carbon steel material, durable and lasting performance. It's a great substitute for your product.

[Easy to install] Hammer head drop in T slot nuts, they can be directly into the aluminum slot hole in any of the assembly post, back spring ball can be fixed its position which make installation very simple and reliable.

Ball Shaped, Made with Copper for Durability and Strength

Tapped 8-32 Size Is Useful for Common Projects

Easy Installation, Cap Nuts May Be Tightened by Hand

Provides More Seating Surface than Traditional Lug Nuts

Stamped with Thread Size for Easy Identification and to Prevent Confusion

Made of High-Strength Steel

Jandorf Cap Nut

Material: Solid Brass Ball

Size: 3/8" Dia.

WIDE APPLICATION: Widely applicable for mechanical devices, clamps, molds, automatic machines, etc.

MATERIAL: Ball catch latch catcher is made of 304 stainless steel material, which can provides strength and offers good corrosion resistance in many circumstances.

CONVENIENCE: There are total 20 pieces of ball plungers in one set that you may use for many projects.

Size: 1/4''-20

Ball diameter: 5/8"

Commonly Used To Cover Exposed Threads

Set of 20 black closed end bulge acorn lug nuts 1/2"-20 thread, applicable models please check details

1.38"(35mm) tall, 0.87"(22mm) wide, 3/4" hex

60 Degree conical seat (Not fit mag seat, ball seat and round seat)

【Specifications】: 14mmx1.5 thread - Closed End - Conical 60 Degree Seat - 2 inch(50.8mm) long - 0.9"(23mm) wide.

【Packaging】: 32 Black Closed End Spline Lug Nuts with 1 Socket Key.

【Vehicles Fits】: Vehicles with wheel studs requiring a 14x1.5 thread，and wheels that take a conical 60 degree seat, not fit mag seat,ball seat and round seat.