Best 12 Inch Band Saws in 2026

2-1/2-inch cut capacity of the metal band saw cuts up to 2-inch SCH 40 pipe

Centered handle position of the portable band saw provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue

LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting of DEWALT band saw.

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish

Features a spacious 30-by-6-inch table

Remove 0 to 1/8 of an inch of material with each pass

EXTEND REACH - 3-piece set of 6, 9, and 12-inch Chromoly steel extensions for tight spaces

SWIVEL-HEADS - Wide range of motion and more angles to work from make it easier to reach fasteners

MAXIMUM TORQUE TRANSFER - Pinless joint design transfers maximum torque from driver to socket

Product 1: Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Product 1: Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Product 1: Onboard class II laser guide illuminates your line of cut

Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames used by other manufactures

Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size

Rip Fence- A quality rip fence is now included. Easily removed to do free hand work

Set of 2. 26mm OD x 10mm ID x 8mm wide.

Bearings fit upper or lower blade guide locations.

Fits Craftsman 12-Inch Band Saw models from the 60's through the 80's. These are belt drive models that match the those shown in the last two pictures.

STAINLESS STEEL - This sturdy band saw stand is constructed from solid steel and provides reliable, sturdy support for effective operation of your band saws.

BAND SAW STAND - Designed to fit RIKON 10-300/10-305 and Sears 921400 bandsaws.

SLIP PREVENTION - Non-slip rubber tips on each of the stand's four legs keep it securely in place during use. The rubber tips also protect your floor or shop surface. Four support braces and carefully designed leg angles provide additional stability.

2.8-amp motor rotates the blade up to 2500 feet per minute

Create cuts up to 3-1/2 inches deep and 9 inches wide

Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

There are Brand New - Unused Drive Belts for Sears Craftsman Band Saw Part Number 1-JL20020002; 24" Internal Length, 4 Rib;

Fits Craftsman Band Saw models: 119.224000, 119.224010, 351.224000;

Replaces Part Numbers: 1-JL20020002, JL20020002, 29502.00;

2-1/2" X 2-1/2" Cut Capacity

Built-In LED Work Light

Variable Speed Trigger

351.224000 Ribbed Motor Drive Belt suitable for SEARS CRAFTSMAN 12" Band Saw Model

This is Brand New - Unused Drive Belt for Sears Craftsman Band Saw Part Number 1-JL20020002(1-Pack).

24" Internal Length, 4 Rib. Fits Craftsman Band Saw models: 119.224000, 119.224010, 351.224000.

Replaces Part Numbers: 1-JL20020002, JL20020002, 29502.00.

Product 1: 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Product 1: Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Product 1: Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Fit model:Compatible with Craftsman Band Saw models: 119.224000, 119.224010, 351.224000.

Replaces part numbers: 1-JL20020002, JL20020002.

Size:12 Inch Band Saw 4 Ribbed Drive Belts, 24" Internal Length.

BAND SAW RIBBED DRIVE BELT 12" 1-JL20020002 for Craftsman 119.224000 351.224000

Ribbed Drive Belt for Craftsman 12" Band Saw 119.224000

Compact Benchtop Design: Easy transportation to different shop locations.

Ideal Starter Saw: Easily handles smaller cut application work and is suitable for scroll sawing (accommodates 1/8"-1/2" blades).

Increased Rigidity: Upper and lower cast iron frame.

14" RESAW CAPACITY: For cutting large pieces of wood, slicing veneers, and cutting book matched panels.

21-1/2"x16" CAST IRON TABLE: Added stability and work support.

4-SIDED GUIDE POST WITH RACK AND PINION ADJUSTMENT: Optimum blade support.

Motor: 1/3 HP, 120V, single-phase, 2.8A

Max. cutting width left of blade: 9"

Max. cutting height (resaw capacity): 3-5/8"

Country of manufacture: China

Outer Diameter: 12 inch

Inner Diameter: 1.2 inch (30.5 mm)

Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min±10%.

Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.

Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45°, allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.

Quick-positioning vise swivels to 45°, reducing set up time; built-in, self propelled blade brush extends blade life

Heavy-Duty geared head transmission for quick speed changes; vertical work table

Heavy-Duty cast iron saw Bow and head; coolant system

ALTERNATE TOP BEVEL GRIND – Alternating left and right bevel which cleanly shear the wood fibers when crosscutting

EXPERT DESIGN – The thin kerf and high tooth count make this blade the most suitable for crosscutting and trimming of natural wood, this blade is capable of making fine and extra fine cuts

VERI-BLEND HIGH DENSITY CARBIDE - Lackmond’s titanium carbide tipped blades provide the best performance for your specific cutting application, resulting in superior finish and extended blade life

Power Tools and Accessories

Country of manufacture: China

Manufacturer: Westward

【Fitment】7-inch band saw resaw guide for large workpieces band saw, for Jet, General, Grizzly, and many others most 14" band saws with KMS7200 bandsaw fence. A bolt-on bandsaw fence accessory that is easily attached to your precision bandsaw fence.

【Specific usage】A reliable replacement for Kreg KMS7214 resaw guide, which is a specific bolt-on bandsaw fence accessory that adjusts precise blade drift and perpendicularity. Package included hardware: Knurled nuts and hex-head bolts.

【Curved Face Guide】 Quality resaw guide with a curved surface of resaw guide allows you to steer the board left or right. With the workpiece against the resaw guide, slowly feed it into the blade. Help beginners get a precise band saw cutting which can maintain their desired thickness.

Product 1: 2.8-amp motor rotates the blade up to 2500 feet per minute

Product 1: Create cuts up to 3-1/2 inches deep and 9 inches wide

Product 1: Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

EASY INSTALLATION: Crafted in standard size and lightweight, small size, the installation can be quickly completed and then put into use.

NOISE REDUCTION: Using the rubber saw tire can help you reduce the work noise and promote the working environment!

RUBBER MATERIAL: Made of premium rubber material, the wheel is soft and flexible, will not dry, improve work efficiency and life span.

Product 1: Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel

Product 1: Adjust the mechanical variable speed anywhere from 530 to 3100 RPM

Product 1: Digital speed readout displays current RPM of the machine for maximum precision

Product 1: Features a rip capacity of up to 25 inches for taking on 4x8 plywood and OSB sheets

Product 1: Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM

Product 1: Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees