Best Driver Bar Ends in 2026

🌎 For Post Size: M10 or 3/8”-16; 12-Way connectors Design: 6 x hole-holders and 6 x threaded studs.

🌎 Battery Post Type: Bolt Down Ends or Threaded Stud. (Remark: Bolt Down Ends including Top Post and Side Post)

🌎 For Battery Type: Lithium and Lead Acid Batteries (AGM, GEL, WET, MF and CA/CA). Support Battery Voltage: 48V, 36V, 24V, 12V, 6V.

→[Dimensions}: The bus bar is measured (L x W x H): 138 x 69 x 44.5mm (5.433"x2.72"x1.75"). Stud size: M8 (5/16").

→[High Quality]: Bus Material: The battery distribution block is made of brass and nickel plated, which has good electric conduct performance and sturdy rust-resistant. The base is made of nylon - glass fiber reinforced to protect your safety, ensures great mechanical strength and durability.

→[Waterproof & Dustproof]: The power distribution block With four removable side plates, a insulated rear cover, that's designed to withstand rain and dust,resist the air and seawater erosion.

Practical: Use the ABN Inner Tie Rod Tool 3/8” Inch to remove inner tie rods without having to extract outer tie rods

Compatible: For all standard tie rods with smooth cylinder ends; Will work on any rod that fits between the 3” top and bottom components with both 9/16” nuts screwed on and tightened

Easy to Use: Slide tool over end and tighten collar to allow access with a 3/8” drive extension; adapters can be used for larger breaker bars/extensions

Product features: brass plate and stainless steel terminals as conductors have low resistance, conductivity and corrosion resistance.

Parameters: maximum voltage: 300 V AC, 48 V DC, maximum continuous current: 130 A AC, 150 A DC.

Scope of application: suitable for automobiles, automobiles, trucks, ships, boats, yachts, etc.

【Wide Applications】- The power distribution block is widely used in12-48V auto and marine wiring, trucks, RVs, boats,Trailers and other industrial equipment.

【Good Performance】Bus bar is made of zinc alloy and brass with good electrical conductivity.Each bus bar includes a cover to protect connections from protect against damage and corrosion. The insulated nylon base is flame-retardant.

【Size & Working Rating】-Stud size: 5/16".The battery bus bar is measured 6.7" x 1.3" x 1.73". Maximum amplifier per circuit: determined by the connected wires. Maximum working voltage is DC 48V & up to 250 Amps.

Includes standard and oversize bar ends

Made in the USA

The Package Length of the Product is 7.0 inches

The Package Width of the Product is 7.0 inches

The Package Height of the Product is 4.5 inches

Replacement for 2004-2012 Chevy Malibu - [2005-2010 Pontiac G6] - 2007-2009 Saturn Aura

Kit Includes: (2) Inner Tie Rod Ends + (2) Outer Tie Rod Ends + (2) Front Stabilizer Sway Bar End Links + (2) Rack Pinion Boots and Bellows w/ Locking C-Clamps

Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs

Compatible With Factory 7/8" Hollow Handlebar (Not Compatible With Aftermarket Handlebars)

Designed to fit like OEM

6065 Billet Aluminum

Superb strength for durability

Consistent torque for smooth operation

Full ball stud

*Fitment: MT-07 FZ-07 XSR700/900 MT-09 FZ-09 MT-10 FZ-10 MT-125 XJ6 T-MAX

*Available color: Black/Blue/Red

*we use the CNC carving design

Fits 7/8" Hollow Handlebar. Designed to fit like OEM

6065 Billet Aluminum

Replaces OEM Part #'s: 56200-35830, 56200-35831, 56200-18840, 56200-18842, 56200-14830, 56200-14832, 56200-41820, 56200-41822, 56200-41821, 56200-41822, 56200-23830

【Fitment】 ✔For Honda CBR150 ✔For CBR100F ✔For CBR1000RR ✔For CBR1100XX ✔For CBR125 ✔For CBR250 ✔For CBR300R ✔For CBR400RR ✔For CBR400F ✔For CBR450SR ✔For CBR600RR ✔For CBR600F ✔For CBR900RR ✔For CBR954RR

【Material】 Aluminum Alloy + Rubber. Aluminum offers the grip eight available colors to fit your bike. Non-slip rubber designed provide drivers security escort.

【Package Included】 A pair of Handlebar Grips with Grip Ends (Left:22mm & Right:24mm)

Compatible with Buick, Chevrolet, Oldsmobile, Pontiac

OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.

Durable alloy handlebar end cap, Universal fits all motorcycles 7/8'' bar end

Ideal replacement for cheap end plugs

Easy installation! These grips are great replacement for your old grips

OEM Bar End Interals are Required for Install

Shogun Bar End Sliders are designed to help minimize friction with the pavement in the event of a crash. Reducing friction can help minimize your repair bill.

Each Shogun Bar End Slider kit is CAD designed for each motorcycle model.

【Suspension Kit Fitment】 - 1987-1996 For Ford Bronco 4WD, 1987-1996 for Ford for F-150 4WD

【Suspension Kit Include】- 1x DS1017T Front Inner Tie Rod End - Driver Side, 2x K8195T Front Lower Ball Joint, 1x ES2078LT Front Outer Tie Rod End - Driver Side, 1x ES2077RT Front Outer Tie Rod End - Passenger Side, 1x ES2080S Front Tie Rod Adjusting Sleeve, 2x K80026 Front Upper Ball Joint, 1x DS1138T Inner Tie Rod End - Passenger Side, 1x ES2079S Tie Rod Adjusting Sleeve - Passenger Side

【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering

Fitment Information: All 7/8 inch diameter, hollow handlebars or clip-ons.

100% brand new and never been used ; Package Included : A Pair of Bar End Plugs

Material: CNC Machined Aluminum + Slip Rubber

Compatible with Chevrolet Silverado 1500 1999-2006 RWD / Chevrolet Silverado 1500 Classic 2007 RWD / GMC Sierra 1500 1999-2006 RWD / GMC Sierra 1500 Classic 2007 RWD

OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.

【SUSPENSION KIT FOR】 - 2002-2006 For Cadillac Escalade,2003-2006 For Cadillac Escalade ESV,2002-2006 For Cadillac Escalade EXT,02-06 For Chevy Avalanche 1500,1999-2006 For Chevy Silverado 1500 4WD,2003-2005 For Chevy Silverado 1500 AWD,2004-2006 For Chevy Silverado 1500 RWD,2000-2006 For Chevy Suburban 1500,2001-2006 For Chevy Tahoe,1999-2006 For GMC Sierra 1500 4WD,2002-2006 For GMC Sierra 1500 AWD,2004-2006 For GMC Sierra 1500 RWD,2001-2006 For GMC Yukon,2001-2006 For GMC Yukon XL 1500

【WHAT INCLUDED】 - 2x K8987 Front Stabilizer Bar Links, 2x ES3493T Front Outer Tie Rod Ends, 2x ES3488 Front Inner Tie Rod Ends

【HIGH QUALITY BRAND】 - SCITOO Auto Parts Select Premium Quality Material And Rigorous Professional Testing To Help Ensure Quality And Durability & Provide 1 Year Warranty.We Provide Suspension Kits For Most CARS,SUVS,TRUCKS,TRAILERS

FITMENT - The motorcycle bar ends is compatible with CBR250R CBR300R CBR400R CBR250RR CBR400RR CBR600RR CBR900RR CBR929RR CBR954RR CBR1000RR CBR 600 F2,F3,F4,F4i

HIGH QUALITY MADE - The bar end is made of CNC billet aluminum and it is hard anodised and has a bright and vibrant colour.

EXCELLENT PERFORMANCE - The end of the handle is generally used in combination with the handle , which can reduce the injury during the fall.

Material: High Quality Billet Aluminum

These bar ends are designed to protect your bars and grips in the event of a crash.

High quality anodized billet aluminum CNC made Bar Ends

Well-built and Heavy-duty Bus Bar ( 400A, 48V DC ) Box with 8x 3/8" (M10 ) Terminals Studs(( Also available in 5/16"( M8)), Black & Red Cover

Module box design, great for multiple battery wiring configurations

Bus Material: Tin-Plated Copper, for maximum conductivity and security

Material :  T6061-T6 Aluminum (High Quality Material, Light grade & Light-weight)+ non-slip rubber

Fitment: Compatible with CBR600RR 03-14,CB250 91-08,CBR1000RR 04-14,CBR900RR 93-03,CBR954RR 02-03,other model please see Product description.

Damping:High ductility soft gel, extendable & Excellent Shock absorption function

High quality anodized billet aluminum CNC made Bar Ends

These bar ends are designed to protect your bars and grips in the event of a crash.

Easy installation! Screw directly into your existing handlebar insert.

✔️HEAVEY DUTY - Made by billet 6061-T6 aluminum with completely CNC machined and hard anodized. We DON'T USE CASTING aluminum.

✔️UNIVERSAL FITMENT - TWO sizes of aluminum expansion tubes allow our ends fits wide range of motorcycles, dirt bikes and scooters whether they have 7/8", 1" or 1 1/8" hollow handlebars, also available for steel hollow handlebars.

✔️EASY INSTALLATION - Only using 6mm L-key wrench for cap installation and 5mm L-key wrench for expansion bolt.

Compatible with Geo Prizm 1993-1995 / Toyota Corolla 1993 FWD / Toyota Corolla 1994-1995

OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.

Compatible with Dodge Ram 1500 1994-1999 RWD Models

OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.

Compatible with Nissan Maxima SL Sedan 4-Door 2004 / Nissan Maxima SE Elite Sedan 4-Door 2005 / Nissan Maxima SE Elite Sedan 4-Door 2006 / Nissan Maxima SE Sedan 4-Door 2007 / Nissan Maxima SE Sedan 4-Door 2008

OEM Design Direct Fit / Eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength

Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.

【Suspension Kit Fit】 For Jeep Grand For Cherokee 1999-2004;

【Suspension Kit Include】(1) ES3472 Front Right Outer Tie Rod End;(1) ES3473 Front Left Outer Tie Rod End;(1) ES3474 Front Right Outer Tie Rod End;(1) ES3475 Front Inner Tie Rod End - At Pitman Arm;

【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering