Best Bypass Barn Door Hardware in 2026

【Superior Quality】Solid steel,fine black powder coated surface,anti-corrosion ensures years of beauty and longevity.All items have been multiple inspected before on market.

【Fine Design】Smooth polished chamfered edges,ergonomically design prevent any unexpected injury and provide a more comfortable handing feeling.

【Easy Install】Fit door thickness from 1'' to 1-3/4''.And all necessary parts and tools we are ready for you.

►ALL WHEELS EQUIP WITH 2 BALL BEARINGS -Bearings provides a very quite and smooth glide as the door opens and closes,be aware of other no bearing barn door stoppers with poor functionality which may hurt your door.Dual rollers adjustable to fit to a thinner doorboard

►COMPLETELY CLEAN FLUSH TO GROUND AND UPGRADED ROUND CORNERS:Countersunk screws design to make our floor guide sit flat to floor,no gap between bracket and floor, ensure no damage to your floor.Upgraded round corner shape to avoid tripping hazard, keep childrens and toes safe from the hurts.

►Heavy Duty Construction-Black Powder Coated finish: Our premium black powder coated bracket is made from pristine steel and perfectly shaped to offer a flush fit with your wall and floor. The SMARTSMITH Groove system and low profile hardware sits invisibly inside the unit which means there is no gap between bracket and floor. Our competitors haven't gone to these lengths resulting in a messy unappealing look with poor functionality.This is amplified in highly viewed areas such as living rooms

【Single Track Bypass System 】Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily.

【Why Choice Bypass Barn Door Hardware Kit】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2. 9FT rail (2 x 4.5FT ) with Pre-drill 16" apart hole on rail to line up standard studs.

【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly.

Why choose us: With 1/3 of the market price, you can get the same quality products here! premium quality hardware kit is provided along with a completely turnkey experience.

Overlap Space: There would be a 8"-12" overlap space since the 2 doors are hanging on one single rail. Please be reminded that your door panels should be wider than your opening( 8" at leaset ). If not, the 2 rollers will hit when one door slide, then drive other door slide.

Package included: A Barn Door Hardware kit (2x 3.3ft Rail, 5x Rail Spacer, 4x Roller, 2x Door Stop, 1x Floor Guide, 1x Hex Key; All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.

Durability and Weight Capacity: Solid steel roller hanger and High strength industrial grade flat tracks hold MAX. 330LB/150KG door, anti-corrosion and little wear and tear for years of repeated use.

Quiet and Smooth Operation: Super silently nylon wheels and Spring damping door stoppers provide soft close sliding when opening and closing, move quietly and smoothly.

Save Space: For space-saving benefit, ccjh sliding barn door hardware kit is a great option for both homes, offices, narrow hallways and as well as smaller apartments, blending modern design with rustic appearance.

This hardware set is going to be mounted on the floor to ensure the door stays in-line with the rail above

Use one pair for a single door of any thickness or a bypass door system

Perfectly work with all kinds of rolling door kits,features durable and reliable performance

[ POWERFUL FLOOR BOTTOM GUIDE ] - Made of high quality steel with powder-coated matte black finish, works great to replace the plastic door guide, our sliding door guides mounts to the wall/closet, cause no damage to the floor, help prevent cabinet door from swinging/wobbling.

[ CONCEALED BARN STYLE ] - Universal door guides are simple & easy to use, the glide will slide invisibly through any bottom grooving door, avoid accidently kick on your feet/toes, leave no marks on the surface, keep the door clean and safer.

[ ADJUSTABLE FIT DOOR THICKNESS ] - WINSOON Barn Door Guide can also act as stay rollers, by create a “U” shaped adjustable channel that accommodate a thicker non- grooving door up to 1-1/2 inch, or grooving door 1-9/16 inch.

ADVANCED TECHNOLOGY YOU CAN BELIEVE: At FREDBECK Hardware, all of our barn door hardware is made from quality materials and is handcrafted by skilled artisans. The use of advanced cutting technology in our factory to ensure the precise size of the sliding barn door accessories, especially in the axis of the hanging rail and track interface to show its unique features and advantages.

EASY TO INSTAL: Our barn door hardware comes complete and ready for you to install yourself. Professional Step-by-step instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.

PACKAGE INCLUDED: A Barn Door Hardware Kit with 1x 2.5FT Rail, 2 x Rail Spacers, 2x Rollers, 2x Door Stops, 1x Floor Guide.Cabinet Not Included.

【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling; double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other.

【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs.

【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly.

【𝗛𝗲𝗮𝘃𝘆 𝗗𝘂𝘁𝘆】 Solid steel,fine black powder coated surface,anti-corrosion ensures years of beauty and longevity.Slide Like Butter ,Ball bearing roller slide smoothly and quietly,Tested Beyond 100,000 Rolls.All items have been multiple inspected before on market.

【𝗡𝗼𝘁 𝗘𝗻𝗼𝘂𝗴𝗵 𝗦𝗽𝗮𝗰𝗲? 𝗡𝗼𝘁 𝗔 𝗣𝗿𝗼𝗯𝗹𝗲𝗺!】 Traditional double door bypass kit always not only take up a lot of space but also more bulky and trouble for installation.Our NEW INNOVATION "ONE RAIL BYPASS" can be simple installation, more efficient work, while saving space.

【𝗪𝗶𝗱𝗲𝗹𝘆 𝗔𝗽𝗽𝗹𝘆】 Our hardware suitable for both modern and rustic style,you can apply for aisle,garage,kitchen,bedroom and so on.

【Single Track Bypass System 】Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily.

【Why Choice Bypass Barn Door Hardware Kit】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2. One full piece 6.6ft rail and Pre-drill 16" apart hole on rail to line up standard studs.

【Heavy Duty Construction Ensures Safety】Material thickness up to 1/4 inch (6.3mm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly.

Hardware Only,Not including Door Panel

Material:Steel/POM;Surface:Brushed Nickel;8FT track is 2pcs 4FT track with a connector

Hardware suitable for door thickness 40-45mm(1.57"-1.77")

[HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior.

[EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware.

[PACKAGE INCLUDED] - A Barn Door Hardware Kit (4x 4FT Rails,2x Junction Plate,4x Hangers,12x Rail Supports,6x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED

【Door Weight Capacity】 Support door weight 260lb, fit door panel thickness 1 3/8'' and 1 3/4''. Kit comes with all necessary hardware for hanging the door, DOOR NOT INCLUDED.

【Smoothly and Quietly】 Designed with premium sliding pulleys, it provides silent, smooth and steady rolling. Very easy to install, includes step-by-step installation instruction. This sliding door hardware is recommended to be installed by 2 people.

【Sturdy and Durable】 Made of premium steel black powder coating, it is waterproof and rust resistant, preventing the kit from scratching, extend the service life of the product, provide a safe and secure life for your family.

【Double Track Bypass】Barn door double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling; double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other.

【Why Choice Our Double Track Bypass】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 6FT Pre-drill 16" apart hole on rail to line up standard studs.

【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly.

[Single Track Bypass Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-66"; Door Thickness: 1 3/8" - 1 3/4";

[One Single Track for Bypass System Available] Normally we need to install the bracket for bypass system,however it is not a easy job for most of us . Some Customer were not have enough space between the ceiling and Doors .But now it will not be a problem ,we have upgrade the bypass system and make it can be install on one track .

[EASY TO INSTALL] Step by Step Instruction. Our Instruction is listing every step for installation, you can do it step by step, It is very easy when you install the barn door hardware.In case you get any problem or missing parts during installation ,please free feel to contact us.

⛅COVER UP WITH OUR MINI HARDWARE KIT. Often time there are some places we want to cover up for personal preferences or simply a better look. Our mini sliding door hardware kit are here to make it happen! It can be used for various purposes such TV stand door, vanity door replacement, cabinet renovation, add on to your pet’s kennel, bookshelf closet and so on!

🔨BARN DOOR HARDWARE INSTALLATION MADE EASY. You hate to see vague installation manual that is just one piece of paper with hard to read measurements, badly drawing pictures and barely any word instructions? So am I! Fortunately, in our installation manual, you will see the step by step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions. You are going to have a pleasant time while installing a sliding door at your home.

⏰MONEY AND TIME SAVER FOR YOUR PROJECT. Tired of spending a hell lot of money and time when searching for the proper size and type of hardware at the big box store? Not the case here! We provide track sizes from 24in to 120in at a reasonable price. We also improved our packaging to make sure you will get everything you need in a timely manner! No more hassle to go back and forth for the missing or replacement parts.

PRODUCT INFORMATION - Barn door floor guides 2 pack; Carbon steel material and POM nylon; Matte black; Can be used in barn door, wardrobe, TV cabinet, fence, living room, bedroom, window, kitchen, warehouse and many other scenes.

HUMANIZED DESIGN - The bottom is flush with the floor design, and the wall-mounted design can adjust the installation height according to the position of the barn door; 8 combinations are suitable for barn doors of various thicknesses (maximum 3.5inch).

SOLID AND MUTE - The steel has strong forging stability and wear resistance, and has a good matte black texture. The felt is attached to the roller to prevent the sliding friction from damaging the barn door, and the silent sliding is smoother.

[Single Track Bypass Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-54"; Door Thickness: 1 3/8" - 1 3/4";

[One Single Track for Bypass System Available] Normally we need to install the bracket for bypass system,however it is not a easy job for most of us . Some Customer were not have enough space between the ceiling and Doors .But now it will not be a problem ,we have upgrade the bypass system and make it can be install on one track .

[EASY TO INSTALL] Step by Step Instruction. Our Instruction is listing every step for installation, you can do it step by step, It is very easy when you install the barn door hardware.In case you get any problem or missing parts during installation ,please free feel to contact us.

[Single Track Bypass Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-42"; Door Thickness: 1 3/8" - 1 3/4";

[One Single Track for Bypass System Available] Normally we need to install the bracket for bypass system,however it is not a easy job for most of us . Some Customer were not have enough space between the ceiling and Doors .But now it will not be a problem ,we have upgrade the bypass system and make it can be install on one track .

[EASY TO INSTALL] Step by Step Instruction. Our Instruction is listing every step for installation, you can do it step by step, It is very easy when you install the barn door hardware.In case you get any problem or missing parts during installation ,please free feel to contact us.

【Big Wheel Double Track Bypass Sliding Barn Door Hardware】Barn door double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, the system doesn't need a wall twice the width of the door opening, very save space, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other.

【Why Choice Our Double Track Bypass】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 4FT Pre-drill 16" apart hole on rail to line up standard studs.

【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. The big wheel is make by POM (vibration-resistance performance, good wear resistance, toughness), covered with nylon, slide very quietly.

At DaAzHai, all of our low clearance barn door hardware is made from quality materials and is handcrafted by skilled artisans. Low clearance barn door hardware, less space required because of low profile barn door hardware are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled.

DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 265 lb; Fit door panel width: 26"-30" ; Fit door panel thickness: 1-5/8" to 1-3/4". If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on.

DaAzHai sliding closet door hardware comes completely and get ready for you to install by yourself. We provide simple instructions so you can quickly install your sliding barn door with hardware kit included stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a reference during the installation.

🔨NOT ENOUGH SPACE? NOT A PROBLEM! Ever frustrated that the ordinary bypass hardware taking too much space with its bulky appearance? With the new innovation of the U shape bracket bypass, we design the bracket to be simplistic at the same time super-efficient to use. It only requires 8 inches clearance and if you are short in the room between the top of the door to the ceiling, the U shape bracket bypass will be a perfect choice.

⭐QUALITY IS 100% UNDER CONTROL. We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track.

👍FULLY OPTIMIZED CONNECTING AND SPACING. I understand how frustrated it was when you opened the box and found out multiple smaller tracks that were hard to line up and connect. Even worse when the spacing was not exactly 16 inches. We’ve got them all figured out! The spacing is now exactly 16 inches. Track 7.5FT and under is only one piece track. Track 8FT and above are connected by two tracks using a junction plate, thus, the spacing between the middle two holes may not be 16 inches.

[Creative & Innovative]: This 6.6ft Sliding Track Bypass Door Hardware Kit comes with all the necessary hardware and equipment for installing hanging doors with a thickness from 1 3/8" to 1 9/16", turning your normal door into an innovative sliding door, closing off bedrooms and side rooms in a creative manner

[Full Set of Accessories]: Comes with a one-piece 6.6ft long jointless sliding track, a roller stopper to prevent excessive sliding, along with a strong floor guide to stabilize door movements

[Easy Installation]: Comes with pre-drilled holes 16" apart on the track for easy installation, suitable for wood or concrete walls, and ideal for installation in bedrooms, living rooms, kitchens, bathrooms, etc.

[HEAVY DUTY STURDY AND SAFE] - All of our barn door hardware Kit is made from Premium quality carbon steels with high temperature fine black powder coated surface. Heavy duty 1/4" powder coated carbon steel rail and roller arms will last a lifetime, 8.8 grade Self-tapping screws and roller screws make our hardware kit can hold twp 230lbs doors comfortably.

[SUPER SMOOTH AND QUIET] - Polymer nylon wheels ensure your barn doors glides along the track silently and smoothly. Lifetime lubricated bearings made with high quality steel for maximum wheel fluency and stability, past 120,000 times opening and closing test hanging a 230lbs door.

[EASY AND HASSLE-FREE INSTALLATION] - Easy to follow Step-By-Step installation manual includ graphic, text & inch unit. If you don't receive it or you want an online soft copy, contact us via Amazon mail, any installation problems our professional engineer team will reply at first ti

Max Door Weight: up to 150lbs (68kg) per panel; Door panel thickness: 1 3/8" and 1 3/4"; Min Door panel width: 24 1/2"x2doors, track can be cut down to fit custom opening width.

Commercial grade precision extruded aluminum box track ensures door will not jump from track, convex rails on track allow flexible and free rolling. Built-in fascia hides the sliding hardware from view.

Three wheel hangers guarantee all wheels carry door weight equally, with heavy-duty ball-bearing offer minimum friction and smooth, quiet rolling.

✅ Barn Door Roller - Material: Carbon Steel, Surface: Black Powder Coated .

✅ Package Included： 2 x Right Angle Roller, 2 x anti-jump kit, 1 x Floor Guide,8 x Spacer (for hanger bolts if your barn door is thin)

✅ Door weight capacity: 265 lbs, Door Thickness: 1-3/8" and 1-3/4".

【Main Material & Surface】Black frosted, high quality carbon steel, corrosion protection, environmental protection, non-pollution.

【Design】Roller Arm Thickness: 6 mm

【Roller Bearing】High purity bearing steel Gcr15, passed the test of opening - closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel's fluency.

Hardware only,not including door panel

Material:stainless steel 304;surface:brushed satin finish

Package's incluiding:roller*4,stopper*4,6.6ft track*2,track&wall connector*10,N bypass connector*5,floor guide*2

Hardware only,not including door panel

Material:stainless steel 304;surface:brushed satin finish

Package's incluiding:roller*4,stopper*4,6.6ft track*2,track&wall connector*8,N bypass connector*4,floor guide*2