Best Aneng Battery Testers in 2026

[Wide Application]: This digital voltmeter can measure AC/DC voltage (0-600V), AC/DC current (0-10A), resistance (0-20MΩ), diode, continuity, LED and battery power. The meter is the ideal muti-functions tester for household and industrial, using include car circuit repair, testing of electronic equipment, home circuit maintenance and HVAC systems,etc.

[Multifunction Measurement]: This avometer has NCV function with sound and light alarm. It allows you to safety detect the cable behind the wall or whatever you may suspect the power is there. Support some utility functions such as auto range, data hold, T-RMS, MAX/MIN, low battery indicator and continuity.

[LED and Battery Testing]: Support for LED testing, you can connect the pens to the two poles of the LED and read the forward voltage drop value from the screen. You can also test battery level in the same way when you dial the switch to ‘battery testing’ range. Auto power off can save battery and reduce battery consumption.

⚡【High Accuracy & Wide Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V/9V

⚡【Multifunctional Electrical Meter】 It functions Continuity (Beep with Light Flashing), Non-contact Voltage test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

⚡【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

【High Accuracy & Wide Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V/9V

【Multifunctional Electrical Voltmeter】 It functions Continuity (Beep with Light Flashing), Non-contact Voltage test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

【Accurate Reading & Wider Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V 9V

【Multifunctional Electrical Meter】 It functions Continuity (Beep with Light Flashing), NCV test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC

⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.

⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery

⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later.

⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC

⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.

⚡【Versatile Design TRMS DMM】This BTMETER BT-770T multitester features 6000 counts autoranging for accurate measurement of AC/DC Voltage, AC/DC Amperage 20A, Resistance, Continuity, Capacitance, Frequency, Transistor hFE, Diodes and Temperature.

⚡【Multifunctional Multimeter】With Audible & Red/Green indicator lamp for NCV (Non-contact voltage test), Continuity Testing. Data Hold, Max/Min Value, Auto power off to save your battery, Low battery reminder. Built with 180° degrees foldable kickstand & Strong Magnet on the back of the meter for hands free operation

⚡【Intelligent Auto Backlight】This digital multimetro built with CDS sensor to sense the ambient brightness, Backlit screen & dial indicator lamp light up automatically, which save trouble to turn on/off all the time. It can also display the ambient temperature, and included extensible thermocouple perfect for water oil temp test

【Must Have Accurate Multimeter】- 6000 counts accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, hFE,with thermocouple to measure the temperature,NCV,etc.

【Multifunction Voltmeter】- The digital test meter can be used to measure high precision range than other.Automatically turn on bright backlight and indicator light on the dial when darkness.Data hold,low power indication and auto shut off to save your battery.

【Troubleshoot electrical problem】- Turn the rotary switch to the NCV gear of the voltage meter and close to the lead being measured,buzzer will alarm,in order to make sure circuits were alive in the house.Safely and Accurately to check household electrical problems.

⚡[Auto Select Voltmeter] BT-7200Smart electric tester with auto functions makes troubleshooting easy. Auto ranging avoids meter damage cause by wrong selection. Automatically select between AC and DC. 15 minutes auto shutdown to save battery and extend service time.

⚡[True RMS Avometer] The 6000 counts clamp multitester is professionally designed for measuring AC/DC Volts 1mV~600V, AC Ampere 0.1A~400A, Ohm 0.1~60MΩ, Capacitor 1pF~60mF, Diode, Non-contact voltage detection. True-rms DMM can accurately test on both linear and non-linear loads.

⚡[Safe NCV Detector] Approach the ohmmeter near the socket to safely detect voltage without touching any wires, the LED will light with BEEP sound to alarm you. Clamp on wires to take amps measurement without needing to break into the circuit. Note: Clamp on ONE conductor, or it displays wrong zero reading.

⚡【High Accuracy Pen Multi-tester】Avg Accuracy of DC Voltage +/- 0.5% of readings + 2 digits, built with sharp high quality test lead

⚡【Multifunction Pen Type Meter】Voltage Tester accurately measures AC volt 2V ~ 600V, DC volt from 200mV ~ 600V, resistance from 200 ohm ~ 20M ohm, continuity buzzer test,and built-in buzzer sounds if resistance is less than 50Ω.

⚡【Backlit Screen Multitester】With bright screen back light,12mm tall digits and front LED flash light makes it easy and clear to read even in dark.

✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test.

✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator.

✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires.

【Datalogging Digital Multimeter】This voltmeter can connect with a computer via USB cable using the software included in the CD Allows you to monitor & log the voltage, current, temp, resistance etc. Display all measurement on the same interface including: Max/min/current, on-screen graphing, real-time clock, sampling rate setting, export data to Excel/TXT file

【Multifunctional PC Link DMM】Data-recording multi-meter measures AC/DC Voltage, AC/DC Current, resistance, frequency, capacitance, temperature, diode test, continuity buzzer, 1.5V/9V battery test.

【Auto-Backlight & Auto Shutdown】Built with a light sensor to sense the ambient brigtness, turn ON/OFF backlit screen automatically, no more pressing a button back on forth during the measurement. In case you forget to turn the meter OFF, it’ll auto power OFF after 30 mins of operation. Long press “SELECT” you can disable it anytime.

⚡[Wide Range Avometer] True-RMS AC/ DC amps multitester can accurately measures DC volts 0.1mV~1000V; AC voltages 1mV~750V; DC & AC ampere 100mA~1000A; Resistance 0.1~60MΩ; Capacitor 1pF~60mF; Frequency 0.001~9.999MHz; Temp -4~1832℉ (℃/℉ Optional), diode and continuity test.

⚡[Smart Amps Meter] Download customized App for Android/ IOS phones on Google Play or APP Store, which allows you to real-time monitor live maximum/ minimum/ average value simultaneously, graphing your measured data, record, save and output serial measurements.

⚡[Safe NCV Detector] 45mm large jaw design can easily clamp on thick wires and take amperage measurement without breaking into circuit. Non-contact voltage detection checks volts status in simper and safer ways with visual and audible alarm.

【Smart Bluetooth Connected Meter】This intelligent voltmeter can connect to your iPhone/Android phones allows you remotely monitor, log the data on your phone, and export in EXCEL or TXT files. Display all measurement on the same interface including: Max/min/current/average, on-screen graphing, real-time clock, sampling rate setting, export data to Excel/TXT. ✅(For iPhone, need to work with iTunes software to export the saved document.)✅

【Loads of Features Electric Tester】It can measure AC/DC volt, AC/DC amps, Ohm,Capacitance(Nano farad ~ microfarad), Temp in ℃, Frequency, Duty cycle, Diode test, Continuity buzzer tester, Data Hold, Auto Backlit, 1.5~12V battery testing, Relative value measurement.

【Auto-Backlight Display】Built with a light sensor to sense the ambient brightness, turn ON /OFF backlit screen automatically, no more keep pressing a button back on forth during the measurement. Volt ampere meter storage case included allows you to put all accessories neat and together.

➤【Multifunction Multi Meter】This multimetro can accurately measures DC voltage 200m~600V, AC volt 200~600V, DC amperage 2m~10A (resolution 1 microampere), Resistance 200~20M ohm, Temperature -20 to 1000 ℃. K type Thermocouple included

➤【Added Features】Audible continuity, Diode test, Transistor testing, Data hold, Backlit screen, Low Battery Indication. Palm size makes it portable to help you troubleshoot electric problems around

➤【Troubleshoot Safely】This voltmeter is designed according IEC 61010-1 & CATIII 600V over-voltage protection. Fuse change easily. Compact removable rugged case for anti-drop protection.