Best Printer Battery Testers in 2026

12 Volt battery and system testing

40-1200 CCA testing capacity

7-15V operating range

🔥【Easy Operation】- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.

🔥【Safety Ensured】- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC. 【If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"】

🔥【High Accuracy】- With a Four-character lighted digital display, the voltage testing accuracy will be close to 0.01volt. 【NOTE: Verify the counterfeit with only 3-character display. The accuracy is only 1/10 of ours.】

【Professional Enough】Adopting cutting-edge conductivity testing technology, the TOPDON BT600 automotive battery tester performs various tests and offers suggestions correspondingly. Battery testing for 12V batteries shows a battery's health, rated CCA, etc. Cranking and Charging tests can check cranking systems and charging systems, allowing technicians to accurately determine fault location through this smart battery analyzer.

【Work on More Batteries】Supporting tests for 12V & 24V Lead-Acid batteries (CCA 100 to 2000A), this car battery tester enables professionals to work on Sedans, Motorcycles, Pickup Trucks, Heavy-Duty Trucks, and Boats. With the BT600 battery tester, technicians can complete more testing jobs on batteries, such as regular flooded, AGM Flat, AGM Spiral, GEL, and EFB batteries.

【3.5” Color Screen & Built-In Printer】3.5” color screen, which is bigger than 90% car battery testers, and intuitive user interface enable simple operation. With a built-in printer, this digital battery tester allows users to print reports immediately with thermal sensitive paper, suitable for shops to print out whenever a proof or record is needed. The data Playback function can save data from the last test performed, making it easier for users to check the data.

Wide Range of Applications: can measure AC and DC voltage, resistance, and current, It can also test circuit continuity, battery quality, and diode biases; a must have addition to all your electrical and electronic tools for industrial and household use

High Quality Display with Backlight Function: features a high quality 3 ½ digits display with maximum display value of 1999 with automatic polarity display; with backlight to conveniently see the values in dimly lit areas

Features Hold function that retains the last measured value, a kick-stand, silicone cover for protection; low battery indicator icon displayed when battery power is low; easy to use and operate

🚗 Reliable Battery Testing: The AUTDER AD-808 battery tester is designed for testing both 12V and 24V batteries for a wide range of vehicles including cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts. The accuracy of the car battery voltmeter is close to 0.01V, providing reliable results

🔥 Alternator Charging System Analysis: In addition to determining whether a vehicle battery needs replacement or a jump, the AD-808 can also test the status of the alternator output to prevent damage to the battery from overcharging or incomplete charge

🎯 Easy to Use: With its intuitive design, the AD-808 has three gear modes for testing the alternator, 12V battery, and 24V battery respectively. In the middle gear, the LCD screen displays the real-time voltage while the LEDs indicate the alternator status. Shifting to the 12V or 24V gear displays the real-time voltage on the LCD screen and the LEDs indicate battery status

Test your battery accurately

package height : 2.286 cm

package length : 18.541 cm

Tests 6 And 12 Volt Batteries

Analog display is easy to read

1,000 Cold Cranking Amps

【2023 Professional Bluetooth Battery Tester】Different from the traditional testing method. BST360 using the newest Bluetooth technology to detect the car battery, you no longer have to stand in front of the car waiting for your testing work, after connecting the car battery you can open the app on your phone/tablet (LAUNCH X431 Series tablets are suitable) for car battery testing work, which is customer friendly and easy to use.

【Battery & Charging & Cranking Test】With LAUNCH BST360 automotive battery tester, we can check the overall health of the battery, including the cranking test, and run a complete system charging test. The cranking test is to test and analyze the starter motor to check if the starter motor is working properly, and the charging test is to check the state of the charging system to avoid damaging the battery. It is much more convenient than driving a few miles to a nearby auto repair store.

【6V & 12V Battery Monitor】Our Bluetooth car battery tester is compatible with all 6 volt and 12 volt lead-acid batteries include regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts.

【PROFESSIONAL-GRADE 6V-12V-24V CAR BATTERY TESTER】 KW720 is the top 1 battery tester automotive which can works on all 6V, 12V and 24V batteries(100-2000 CCA), testing result up to 99.99% accuracy, also great alternator and starter tester, the most reliable battery load tester on the market.

【LARGE COLOR SCREEN + ENHANCED CLIPS + THERMAL PRINTER】compared to other similar 12V battery testers, KW720 is the only battery analyzer that adopts a very large color screen and rugged design. It also upgraded the connection cable(8.8ft) and enhanced the clips to reduce the measurement error. Besides you can print the testing data at any time with the built-in thermal printer(paper included).

【ADVANCED VOLTAGE WAVEFORM FUNCTION】KONNWEI is the only auto battery tester manufacturer that can catch the voltage changing and show the waveform into graphing, up to 20 points in one second, helps to track the real-time voltage to find the battery issue. Even can be uploaded to computer compare them to analyze the in-car system.

【UPDATED TESTING TECH】ANCEL BST600 battery load tester is a more advanced battery load test tool with printer,It is can test battery temperature and measure current CCA values. It suits to 12V/24V starting & charging system and can quickly test the cold start current, internal resistance, battery life, and accurately display the battery condition. The features include Battery test, Cranking test, Charging test, Maximum load test and reverse power connection protection.

【CAR BATTERY TESTER with BUILT-IN PRINTER and PAPER】Its built-in printer with standard thermal printer paper, so you can conveniently attach a printout to a work order, share it with your customers or build a preventative maintenance program of record-keeping, enables you to keep printing records for future reference.( Printing Issues: make sure roller is pressed to the paper.If the roller becomes loose, it will cause poor contact between print head and paper, and no words can be printed. )

【12V & 24V BATTERY LOAD TESTER】ANCEL BST600 automotive battery tester works on 12 volt & 24 volt lead-acid batteries including regular flooded, AGM flat plate, AGM spiral, GEL and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers and even golf carts.

Dual Testing Methods: The TOPDON BT100W car battery tester offers two ways to get accurate battery testing results – via host-side or the Bluetooth testing app. With support for battery tests, cranking tests, charging tests, and system tests, it's the ultimate testing tool for 12V 100-2000CCA lead-acid batteries (including Flooded/AGM/GEL/EFB batteries).

Comprehensive Battery Library at Your Fingertips: TOPDON’s BT100W car battery tester features a battery library function that provides comprehensive battery information for almost 14,000 vehicle models. With just a few taps on the app, you can easily access critical battery information including battery type, CCA, and battery size.

Effortlessly Share and Save Test Reports: The TOPDON BT100W car battery tester features data synchronization and automatic test report generation. During the test, the host synchronizes the data related to the app, and the app can also synchronize the test data stored by the host via Bluetooth connection. The BT100W device and app work together to ensure seamless data transfer and make it easy for users to access and share their test results.

【6V 12V 24V BATTERY LOAD TESTER】: BM800 is a professional battery tester with printer, it can test 6v 12v 24v car battery. It can quickly test the cold start current, internal resistance, battery life, and accurately display the battery condition. The features include Battery test, Cranking test, Charging test, Maximum load test and reverse power connection protection. After connecting a battery, you can easily know the status of the battery in a minute.

【CAR BATTERY TESTER WITH PRINTER】: One key print to get the test results, make you know the condition of your car battery more convenient, let you keep a record for future reference. There are total 3 rolls of thermal paper in the box. ！！！Please make sure the roller is pressed on the paper before print, otherwise it will print nothing or display blurry.

【 Reverse Connection Test Available】Our battery tester support reverse connection test, Even if the positive and negative poles are reversed, it can also work normally, the battery tester will not burn out the internal circuit, which can well protect the equipment and the long-term use of the car battery.The metal alligator clips are covered with rubberized sleeve protector.Your safety is our priority.

🍏 WHAT IT CAN DO - This FOXWELL car battery load tester is developed to test 12V regular flooded, AGM flat plate, AGM sprial and GEL batteries, start-stop AGM and EFB batteries, as well as 6V&12V&24V starting and charging system. Advanced conductance and ripple voltage test provide an easy and affordable solution for you to check battery health and detect faults, and give you accurate test result just in seconds.

🍊 WHAT DATA YOU CAN GET - With the car battery analyzer, you’ll get measured voltage, measured CCA (Cold Cranking Amps), rated CCA, cranking voltage (voltage when starting engine), cranking time, charging voltage (no load), charging voltage (loaded), charging ripple and so on. Charging system test, cranking test and start-stop system test are all available on the 12v battery tester.

🍋 COMPARED WITH OTHER BATTERIES TESTERS - Tests start-stop AGM and EFB batteries; Ripple voltage test allows the technicians to check the output voltage of alternator quickly; Equipped with 0-1000A AC and DC current clamp(optional); More convenient, stable and accurate with advanced conductance test technology; Built-in thermal printer; Replaceable test cable.

Tests 6 and 12 volt batteries from 40-2000 CCA, operating range from 1.5-30V

6 and 12V battery testing, 6, 12 and 24V system testing

Tests multiple battery types, including Conventional, AGM, Gel Cell, Spiral Wound and Deep Cycle Batteries (with a Starting Rating)

Tests regular, AGM, and Gel Batteries - tests all batteries on today's vehicles

Tests discharged batteries with as little as 1 volt - battery does not have to be charged to perform test

Bad cell detection - just replace battery. Cannot be charged.   Rating systems available - CCA / SAE / DIN / EN / IEC

👍【MOST ACCURATE BATTERY DIAGNOSIS】Autel advanced battery tester BT608E is a professional analysis tool for testing 6- and 12-volt batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and is highly compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA battery standards. With the Adaptive Conductance technology, you can get the most accurate test results and deduce the mis-diagnosis to lowest, 95% battery accuracy and 100% detection rate of bad battery.

👍【ALL SYSTEM DIGANOSTICS SAME AS AUTEL MAXICOM MK808/ MK808S/ MK808BT/ MX808】Autel battery load tester BT608 (E) not only works on car battery, but also works on all systems diagnostics, its diagnostic software is same as Autel MX808/ MK808/ MK808BT. It can scan all the vehicle systems to read and clear fault codes/ view DTC descriptions, live data and freeze frame for 80+ US, EU and Asian cars up to 2022/2023. One time purchase, you will get a 2-in-1 battery test and all system diagnosis tool.

👍【INTUITIVE ADAPTIVE CONDUCTANCE】Autel BT608 (E) Car battery test tool utilizes Adaptive Conductance, an advanced battery analysis technology for more accurate examination of the battery's cold cranking ability and reserve capacity. Autel Automotive Battery Tester MaxiBAS BT608 (E) enables test on low or almost completely discharged batteries, and it can be done in the vehicle without disconnecting the terminals, no more mis- and repeat diagnosis, accurate test results for one try.

[BATTERY & CRANKING & CHARGING TEST]: QPKING Car Battery Load Tester tests battery, cranking & charging directly for in-car or out of car battery, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy status of the battery itself, and common fault for auto repair.

[BUILT-IN PRINTER & DATA DOWNLOAD]：Quick and accurate test result in LCD display just millseconds, with printer you are allowed to review the result date and print the result report. Plus when it connects to a PC via a USB port, you can save data for easy reference next time.

[BATTERY TROUBLE SHOOTING]：Test standards include most battery standards in the world, CCA IEC EN DIN JIS and OTHER SPECIES. Super wide range pro tester rated from 100 to 3000 CCA. Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers and even golf carts. With Polarity Reverse Protection, both the battery and device won’t be damaged.

Package Dimensions: 29.464 cms (L) x 12.446 cms (W) x 9.398 cms (H)

Package Quantity: 1

Product Type: Auto Accessory

AUTO BATTERY LOAD TESTER: This battery analyzer adopts advanced conductivity testing technology, can easily, quickly and accurately test the battery performance of cranking ability, cranking load, maximum load and charging system of the car battery. It is your private battery doctor.

REAL TIME TEMPERATURE MONITORING: The best operating temperature of the battery is 20-25 degrees Celsius. A lower or higher ambient temperature will cause the battery to be overcharged or undercharged while testing. Through the Real-time Temperature Monitoring function, you can accurately test battery performance in lower or higher temperature. Save money and time.

DATA REPORT PRINT: Built in thermal printer, you can print test results conveniently, so you can conveniently attach a printout to a work order, share it with your customers or build a preventative maintenance program of record keeping.

[VERSATILITY] - The BAT 135 battery tester with integrated printer tests 6V and 12V batteries from 40 - 2,000 CCA and 12V and 24V charging systems

[BATTERY TESTING] - AGM, Gel cell, flooded lead-acid, start/stop EFB and commercial SLI batteries using a micro-load test for proven, accurate results

[CHARGING SYSTEMS TESTING] - Test 12V and 24V charging systems with a diode/ripple test

Tests flooded, deep cycle, and AGM batteries with CCA range of 100-1600 - also detects discharged batteries, bad cells, and has built in reverse polarity protection.

Unlike competitor models, Auto Meter testers only require a single technician to run a full electrical system test due to our on-board 40 amp True Load cell. This eliminates the need to apply inconsistent loads, such as headlights, fans, etc. which makes our products easier to use and more accurate.

Automatically stores the last 100 tests in memory.

Battery Pack Test (1-6 Batteries) for effective preventative maintenance testing

Special commercial battery algorithms for Group 31 batteries, 8D and 4D batteries

15’ field replaceable tester cable for efficient testing from the cab

TOPDON BT300P Car Battery Tester Bundle with 10 Rolls Thermal Paper➤ Bundle includes 1 Piece TOPDON BT300P Load Battery Tester and 10 Rolls TOPDON Thermal Paper.

FOR TOPDON BT300P ➤ The BT300P is a quick and accurate battery tester that offers printed diagnostic receipts. Know everything about the health of 12V batteries, the 12V & 24V starter motor’s cranking status, and 12V & 24V vehicle electronic system’s charging condition. This is TOPDON’s newly developed battery tester that ensures your batteries are always working at an optimum level.

FOR TOPDON BT300P ➤ This device works on a wide variety of 12V automotive lead-acid batteries, such as 100~2000CCA regular flooded, AGM flat plate, AGM spiral, Gel, and EFB. It detects the failure of the starting and charging systems in 12V & 24V cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, and even lawnmowers. Most vehicle issues caused by a defective battery can be fixed with the BT 300P.

【ACCURATE BATTERY DIAGNOSIS】Otofix bettery tester is a professional analysis tool for testing 6- and 12-volt batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries. Its adaptive Conductance technology give you the most accurate test result just in seconds.

【All System Diagnostics】It can scan all the vehicle systems to read and clear fault codes/ view DTC descriptions, live data.Covers 98% of the US, European, and Asian vehicle makes in the market.Expand your tester to a comprehensive tool with all-system diagnostics.

【Perfect Compatibility Ability】 With the battery load tester BT1, no need to worried about compatibility issue . Otofix battery tester can test almost all 6/12-volt batteries, and 12/24-volt cranking/charging systems, it’s compatible with various battery standards such as CCA, CA, SAE, EN, IEC, DIN, JIS, and MCA.

BAT 155 is an advanced heavy duty battery and electrical system tester designed for the commercial vehicle industry that features patented single load, dynamic resistance technology that provides fast and accurate results

Accurately tests 6V and 12V batteries, with 100 to 6,000 Cold Cranking Amp (CCA) test capacity, including AGM, Gel Cell, flooded lead-acid, Start/Stop EFB and Commercial SLI batteries using a micro-load test for proven results

Versatile tool also tests 12V and 24V charging systems with a diode/ripple test

Four main test result indicate the status of the battery and electrical system of the vehicle: Battery Capacity(Voltage, CCA, Internal Resistance, SOH) / Start-up Load / Maximum Work Load / Charging System .

Full test result printing out with date and time shown in the thermal paper.

English and Spanish interface and printing out reading. Comes with heavy duty carrying case.

🔥【Autel MaxiBAS BT608E 2023 Version】The new version BT608E is a generation product that integrates professional battery analyze, starter & generator test, battery replacement and BMS reset. Autel BT608 (E) is not only a battery tester but also can work as an OBD2 scanner. Came with 8MP camera for License Scan & VIN Scan; Built-in Printer for all kinds of test & report printing. Adopting Android 9.0 OS & 5000mAh battery, Autel BT608 (E) features smooth running and long-time continuous working.

🔥【Professional Battery Tester & Electrical System Analyzer】Autel BT608E adopts adaptive conductance technology, able to test 6V-12V battery and perform analysis on 12V-24V starter and generator with industry-leading accuracy. Unlike traditional battery tester, BT608E is able to Diagnose Low Capacity Batteries, Reduce Recharge & Retest by 30% and ensure 95% diagnosis accuracy rate. Besides, It has 30A discharge (10A for the old conductance profiling method) for a faster battery test.

🔥【Battery Registration & BMS Reset】As a professional battery analysis tool, Autel BT608 (E) support battery replacement function (Battery Type Suggestion , Preparation, Battery Replacement steps, New Battery Test and Battery Registration) in vehicle and able to perform BMS reset. Besides, BT608E support reset functions on specific electrical applicance such as pwoer windows, sunroof and etc on speicif vehicles. Advanced Function: Battery Usage History function for BMW.

Item 1: Car Battery Tester, TOPDON BT600 12V Battery Tester, 12V/24V Cranking Tests and Charging Tests, Alternator Load Testers, 100-2000CCA Digital Battery Voltage Tester, 3.5" Screen with Built-in Printer

Item 2: TOPDON ArtiDiag Pro Car Diagnostic Tool, Bi-Directional Control & OE-Level Full Systems Diagnosis for 100+ Vehicles, Smart Scan Tool with AutoVin, 31 Maintenance Services, 2-Year Free Update.