Best Electric Bike Brakes in 2026

1 pair of bike brake levers included.Installed on 2.2cm diameter handlebar

Installation:First,remove the handlebar grip,adjust the screw,make screw gaps and brake handle cracks be line;Second,clench handlebar,let the hammer head of brake line into the corresponding line hole and then chucking;Third, close the lever,tighten the screws,install handlebar grip

This pair of high hardness aluminum alloy bike brake levers is durable and cool

▲ Universal for 2.2cm diameter handlebar

▲ Automatic lever position restoration provides quick recovery from the crash

▲ Lightweight and don't add any burden to your bike

Universal rubber brake grip sleeve for mountain bikes, Road, Cyclocross, BMX, commuter bikes and scooters. Fits 99.9% of all brake levers,

Anti slip material that gives you more control over your brakes in all riding conditions.

Increases safety and brake comfort.

Complete quantity: the bicycle brake set includes 2 pairs of brakes (with elbow and screws), 1 pair of aluminum alloy brake handlebars, 1 piece front brake cables and 1 piece rear brake cable, a complete set to meet your need of your bicycle installation; There are 6 products

Proper size: the bike brakes' arch is approx. 110 mm/ 4.3 inches, brake pad is 55 mm/ 2.1 inches, long brake line length of 40 inch and short brake line of 20 inch, bike brake handle is suitable for handlebars with a diameter of 2.2 cm/ 0.87 inches, which can be applied to most bikes

Quality material: the brake housing set is made of alloy and plastic, strong and serviceable enough for long time use, with resistance to cold, heat and oxidation, not easy to deform, ensuring the brake sensitive, suitable for most kinds of weather conditions of riding

★【REPLACEMENT FOR】Universal 7/8" 22mm Handlebar Motorized Bike Mini Bike Ebike Electric Scooter;

★【SIZE】Handlebar installation diameter:22mm/0.87";Wire Length:1560mm/61.4"(As the picture shows);

★【EASY TO INSTALL】Stable and sturdy, durable, non-slip,easy to install, very practical.

High Quality: The brake lever on this electric bicycle is made from a high-quality aluminum alloy, which is waterproof, strong, lightweight, and resistant to a range of bad conditions.

Easy to Install: The installation simply requires two cables to be connected and the handle to be fixed; there aren't many processes involved. The installation of the electric bicycle brake lever is quick and easy.

Comfortable Design: The innovative design brake lever on the electric bicycle is easy to operate and has a comfortable grip. You'll have an enjoyable journey thanks to these bicycle brake levers.

【Durability And High Stability】This pair of handlebar grip constructed of sturdy aluminum alloy, high performance of durability and stability, make your riding safer

【Sensitive Control】The handlebar grip are design according to ergonomics, good for comfortable and anti-skid holding, fast brake, can easily control your bike or scooter. Sensitive control, make your ride more secure

【No Negative Pole Or Positive Pole】Easy to install and use, The 1.5 m deep brake cable has no negative pole or positive pole distinction and can be connected to the electric brake switch as required

?DRIVING SAFELY?The brake lever is well made, with rust proof and corrosion resistant surface and long service life. With it, you can drive more safely on the road.

?SAFETY PROTECTION?Electric bicycle is very fast, but you need to have a good brake rod and brake line. The brake rod can cut off the battery current in case of emergency, save energy and protect personal safety.

?COMFORTABLE HANDLE?This brake lever has a new and innovative design. Whether it's the handle or the brake controller, the surface is very smooth, giving a comfortable feeling, making your electric bicycle brake very easy.

Function: For Brake lever barrel adjuster replacements.

Material: The brake lever adjustment screw is made of aluminum alloy, which is durable and corrosion-resistant.

Features: The adjustment screw Simple installation, small size and light weight.

?DURABLE AND STABLE?The brakes are made of aluminum and plastic material, high performance of durability and stability.

?CONNECTION?The 1.5 m low level brake cable has no negative pole or positive pole distinction, can be arbitrarily connected to the electric brake switch.

?FUNCTION?The brake lever plays a big role in protecting the motor and can cut off the power supply to motor while you are braking, which prolongs your motor's lifespan.

[Usability]Suitable for urban commuting electric bicycles mountain bikes etc can be used in any weather conditions not easy to damage

[Easy To Install]Install by adjusting the fixing screw of the lever it doesn't take a lot of time

[Material]Made of aluminum alloy light weight high hardness durable

Constructed of sturdy aluminum alloy, high performance of durability and stability.

Suitable for many kinds of cycling bikes with 22.5mm handlebar, such as mountain bike, road bike and more.

It plays a big role in protecting the motor and can cut off the power supply to motor while you are braking, which prolongs your motor's span life.

ALUMINIUM ALLOY ---- The road bike brake clutch lever is made of aluminium alloy, lightweight, high strength and durable, unbreakable. Mountain bike brake lever have Four colors for you to choose from, colorful and cool.

ADJUSTABLE ---- Bike brake lever is adjustable, by simply adjusting the set screw of the lever, the reach can be adjusted from the smallest hand to the greatest hand and bicycle brake levers provide the best clutch or brake response.

LIGHTWEIGHT AND CONVENIENT ---- The bicycle brake handle with no weight burden,weight super light and don't burden strength to your bike. Hand brakes for bicycle are convenient for you to carry and install,worth to have.

HIGH QUALITY ALUMINUM AND PLASTIC MATERIALS: The brake levers adopt high quality aluminum and plastic material, which is high performance of durability and stability.

GOOD PROTECTION : The left and right side brake lever design plays a big role in protecting the motor and can cut off the power supply to motor while you are braking, which prolongs your motor's lifespan.

UNIVERSAL DESIGN: The 1.5 m low level brake cable has no negative pole or positive pole distinction, can be arbitrarily connected to the electric brake switch. A good replacement part for your old or damaged brake lever of bike.

This set allows ebike rider to safely cut off the power when Ebike brakes are applied. Although both twist and thumb throttles have spring mechanisms which will turn them back to their initial position, having switches on brake levers add a second layer of safety. While these Ebike brake levers are designed for V-Brakes and mechanical disc brakes, levers are long enough to be used on cantilever brake systems.

One pair of electric bike brake levers included. Installed on 2.25cm diameter handlebar.

High quality product. Made of aluminum. Light weight and durable.

【High Quality and Durability】This pair of electric bicycle brakes are made of solid aluminum alloy, high performance in durability and stability, suitable for electric bicycles and electric scooters, etc.

【Highly Sensitive Control】The handlebar handle is ergonomically designed for a comfortable grip and sensitive braking, making your riding safer

[The wiring is not divided into positive and negative poles] It is easy to install and use, the 150CM long brake cable has no positive and negative poles, and the electric brake switch can be connected as needed

【High Quality and Durability】This pair of electric bicycle brakes are made of solid aluminum alloy, high performance in durability and stability, suitable for electric bicycles and electric scooters, etc.

【Highly Sensitive Control】The handlebar handle is ergonomically designed for a comfortable grip and sensitive braking, making your riding safer

[The wiring is not divided into positive and negative poles] It is easy to install and use, the 150CM long brake cable has no positive and negative poles, and the electric brake switch can be connected as needed

Electric bicycle brake handle cut off sensor. Cuts power to the motor when the brake is pressed

The aluminum handle is sturdy and durable, the rubber grip is very comfortable, and the black matte spray paint is beautiful and generous

Effectively protect our brake system and extend the life of the motor.

Electric bicycle brake handle cut off sensor. Cuts power to the motor when the brake is pressed

The aluminum handle is sturdy and durable, the rubber grip is very comfortable, and the black matte spray paint is beautiful and generous

Effectively protect our brake system and extend the life of the motor.

The best "DURA-ACE" grade Di2 dual control lever in ROAD COMPO. Outstanding control and reliability even in racing situations

Ergonomic lever shape for easy operation. Intuitive quick shifting, clear click and ergonomic shift lever position. Lightweight design CFRP bracket, ideal ergonomic design cover shape for different riders

Multi-switch ON/OFF function on each switch. Customizable features to fit your riding style. Brake cable included

Quality Material: The brake lever adjustment screw is made of high quality aluminium material,whith is durable,high strength and corrosion-resistant.

Exquisite Workmanship: Sophisticated production, with good performance and higher work efficiency, brings you more convenience.

Features: Simple installation, small size and light weight.Stringently meet the original standard, design to have the same form, fit and function as original part.

LEFT & RIGHT BRAKE LEVER: Left and right side brake lever supplied and it plays a big role in protecting the motor and can cut off the power supply to motor while you are braking, which prolongs your motor's lifespan.

LIGHTWEIGHT: electric bike brake levers adopts aluminum and plastic material, high performance of durability and stability, lightweight and don't add any burden to your bike, a good replacement part for your old or damaged brake lever of bike.

1.5M BRAKE CABLE: The 1.5 m low level brake cable has no negative pole or positive pole distinction, can be arbitrarily connected to the electric brake switch.

【SAFETY PROTECTION】The electric vehicles are fast but you need to have a good brake lever and brake line. This brake lever can cut off battery current in case of emergency, saving energy.

【COMFORTABLE GRIP】This bike brake levers features a new and innovative design. Whether the handle or a brake controller, the surface is very smooth which provides a comfortable feel.

【WATER RESISTANCE】The bike brakes has good water resistance and sealing, and the surface is rustproof and corrosion resistant, providing an extremely long service life. You can riding more safely.

[Function Description]Electric bicycle brake handle cut off sensor. When the brake is pressed, the role of cutting off the power to the motor

[Material Description]Aluminum alloy durable and waterproof very comfortable grip black matte spray paint beautiful and generous

[Function description 2] Effectively protects our braking system and extends the life of the motor

[Aluminum Alloy Material Brake Lever]: Brake lever is made of aluminum alloy material, durable and not crack or break or get rusting, brake cable is made of zinc coated and PVC, low temperature and intense heat resistance, lever can be applied for long time

[Lightweight Brake Lever]: Although motorcycle clutch is heavier than plastic levers, but it is very light weight as a aluminum levers and will not add any burden to your bike, brake levers will keep your bike's balance performance

[High Sensitivity Brake Handle]: Fine workmanship brake handle, ultralight and colorfast, good brake performance; brake lever is an ultra light non integrated brake lever for mountain bikes with high sensitivity, bike brake lever can help stop your bicycle easily

Rubber Gasket: This rubber gasket is embedded on the electric brake grip to make it comfortable to grip and bring you a better use experience.

Aluminum Alloy Handle: The aluminum alloy handle is sturdy and durable, the mechanical structure brings higher reliability, and the black matte paint makes it look beautiful and elegant.

Applicable Model: The electric bike brake levers are compatible for BAFANG BBSHD BBS01 BBS02 mid motor, and have 3 pin waterproof interface, 32cm line length, which is suitable for 22.2mm handlebars.

Motor Protection: This Bike Brakes play a big role in protecting your motor. They can cut off the power supply to the motor while you are braking, prolonging your motor's lifespan.

Easy to Connect: The 1.7m low level brake cable in our Electric Bike Brakes has no negative or positive pole distinction, allowing you to arbitrarily connect it to the electric brake switch.

Sturdy Aluminum Alloy Material: 2 Wire Brake Lever is constructed of sturdy aluminum alloy, providing durability and stability for long-lasting performance.

DURABLE MATERIAL ---- This ebike brake lever is made of aluminum alloy material, which has high durability and stability, it is not easy to be deformed and damaged, and is an excellent replacement part for the old or damaged brake lever of the bicycle.

CONVENIENT TO USE ---- The Black Chrome Clutch Brake Lever are ergonomically designed, very comfortable and non‑slip,you can easily control your bike or scooter.With screw holes for installing the rear‑view mirror to ensures safety.

GOOD PERFORMANCE ---- The brake handle plays an important role in protecting the motor, and Black Chrome Clutch Brake Lever can cut off the power of the motor when braking, thereby prolonging the service life of the motor.

Ergonomic Handlebar: The ergonomic handlebar grip is good for comfortable and anti-skid holding, can easily control your bike or scooter.

Premium Materials: This pair of handlebar grip adopts good quality materials, waterproof, sturdy, and durable.

Easy to Install: Easy to install and use, only two cables need to be connected. Suitable for electric bicycles, scooters.