Best Folding Bike Fenders in 2026

Mud-X Downtube Mount Quickrelease Fender is a lightweight protection board with rubber strap fastening

Foam rubber pads protect downtube and prevent movement.

Front fender is a perfect match for the X-Tra Dry or X-Tra Dry XL Rear Fenders.

[Unique Carbon Fiber Grain] It's not a carbon fiber fender, but pressed with carbon fiber pattern. Non-toxic PP engineer plastic material is very lightweight but can be suffer in high temperature,long -lasting exposure and can be folded many times. Also effectively used to block mud and debris from the front of the mountain bike to keep you and your bike clean.

[Durable and Flexible] Nicedack bike fender is 0.8mm thickness, super tough but flexible enough to get it to fit for most mudguard mountain bike.

[Difficult to Glide] Four points are fixed to avoid sliding, and the shape is beautiful. More holes than normal bike fenders for easy adjustment and fixing. After fitting the mudguard, make your bike look very cool.

FOR CLEAN RIDES - The VELMIA mudguards offer protection from splashing water and dirt, therefore allowing you to have unlimited fun riding in any weather - also suitable for bikes with a V-brake!

PERFECT FOR MTB & ATB (24"-29" inches) - The splash guards can be used for all common mountain bikes and all-terrain bikes with an integrated suspension fork and a tire size of 24 to 29 inches!

INDIVIDUALLY USABLE SET - While the front mudguard can be mounted in three different ways, the rear mudguard can be adjusted in its angle. So you can adapt the set to your own needs!

MINIMISES MUD FLING: The Muc-Off Ride Guard is a stealthy bike mudguard that helps to prevent mud and spray from hurling up your bike. Whether you're bombing it down the trails or out on the roads, these gnarly crud catchers are the ultimate grime guard!

EASY TO FIT: Our bicycle mudguards are made from a flexible plastic and are super easy to fold and fit. All of our fenders are supplied with the necessary zip ties to secure them into place so that you can focus on minimal-mess shredding!

100% RECYCLABLE: As part of our commitment to kick single-use plastic in the nuts, we've carefully crafted our Ride Guards out of 100% recycled plastic waste. This also means that they too are 100% recyclable so that you can ride with a clear conscience!

Product Type: Outdoor Recreation Product

Country of Origin: China

Product Possess High Durability

WIDER TIRE COMPATIBILITY: Ass Savers Big Mudguards are designed for tires that are 30-50 mm wide, with compatibility up to 55 mm MTB or Gravel tires. Made in Sweden, Ass Saver Mudguards have the reputation of being the first ever mudguard to be used by professional cyclists in UCI World Tour. Available in different colors - Black, White, Red, Blue, Yellow.

MAXIMUM PROTECTION: Generation 4 Big mudguards will keep your butt dry all day long, whether you are on your daily commuter, mountain bike, or gravel rides. Optimum coverage ensures better riding comfort by keeping rainwater, mud splashes and dirt sprays at bay.

GREAT FOR MTB, CX, OR GRAVEL: Improved Ass Savers design is stronger and longer for better coverage and stability on uneven trails. Front rail attachment ensures proper fit and uniform coverage. Self-centering mudguards will strive to regain their centered position in case of accidental kicks or movements during rigorous rides. Lightweight, lower profile design does not interfere with mobility and performance, making them a great choice for thrill riders.

Product Type: OUTDOOR_RECREATION_PRODUCT

Package quantity: 1

No batteries required

Apply to stem diameter less than 34 mm of all kinds of mountain bike, road bike, touring bike, racing bike, etc

Lightweight and easy to assemble. Fixed seat easy for dismantled.

Streamline shape, stylish appearance. Take synthetic fiber plastic, high strength.

【Universal】: Design for road bike (700C) and folding bike (20' wheel). RBRL team try to give each rider a marvelous riding experience.

【About front mudguard】: Fixed on the front fork, large enough to protect from rain and mud, you can also DIY, fix the front mudguard on your seatpost as a rear mudguard, there are more options waiting for you!

【About rear mudguard】: Fixed on the seatpost for different shapes of tube, the connector of the rear mudguard is quick-release, more convenient while using it.

✔️One order includes: 2Pcs*bike mudguard,12Pcs heavy duty cable ties.PP5 plastic. High-quality, enviromental.

✔️ Bicycle fender is 1.2mm thickness, enough to be durable but flexible enough to get it to fit for most mudguard mountain bike,Fit for 26",27.5",29" plus size and fat bike mtb wheels

✔️Sizes.Mud guard/bike fender material can be suffer in high temperature,long -lasting exposure and it is so soft, durable, anti-aging and strong tough that it is not easy to fold.

🚲Durable Anti-Pressure Material: Made of durable PP material, our bike fender is super tough and break resistant. It’s very soft and lightweight, and can be randomly bend and beat, but still keep the shape.

🚲Come with 26feet DIY Reflective Tape and 1 Extra Handle: Different with other suppliers-only providing front mudguard and rear mudguard, our package also includes a 26feet Reflective Tape, so you can DIY on your bike to protect you in the dark, or stick on your motorbike or car decoration. It also includes an extra adjusting handle of rear fender for replacement.

🚲Multiple Bike Size Fit and 9 Colors in Choice: Generally applicable to 20 in/22in/24in/26in bicycles. Our bicycle mudguard set is suitable for most kinds of bikes, like MTB, road bike, city bike and so on. NOT fit the bike which rear pole diameter is smaller than 22mm. Besides, we have 9 colors in choice and you can choose the favorite one to be the coolest on the way.

Max tire width is 35mm or 1.25". These fenders require that your bike includes eyelet mounts. Please review before purchase.

Classic polycarbonate plastic design includes front safety tabs for added safety.

Does not fit all disc brake compatible bikes.

This mud guards keeps your body dry on wet roads.

Dimensions (total): 330(L) x 100(W); Weight (g): 15.

Easy installation with no tools required -The minimalist but ingenious flat design turns into a curved rear mud guard once inserted into the rails of your saddle!

Fender is designed to work with 20" wheel

Fender profile works with tires up to 47mm wide

53mm fender profile must fit through seat stay and fork legs

✔Fold-resistant: ROCKBROS bike fenders is made of polypropylene, it has good toughness and is not easy to break when twisted. The end of this fender is design with rubber, which is difficult to broken, It can provide effective protection.

✔Adjustable: There are two knobs on the rear fender, you can also adjust the angle of the fender as needed. The overall adjustment knob can be adjusted manually, while the mudguard adjustment knob needs to be adjusted with a spanner.

✔Quick Installation: Easy to install mudguard, just adjust the angle and tighten the screws. (Make sure your front fork has holes and the seat post is a round tube)

COVERS A 5" WIDE TIRE - For fat tires up to a 5" width

FOLDING DESIGN - Our unique design bends with the tire and improves fender coverage

Durable material: Bike Mudguard Set made of qualified PP plastic, light weight, high strength, impact resistance, uneasy to be broken.It is very soft and can be bent and tapped at will.

Wider design: streamline design, keeping rain and mud from splashing, and stream slowly down the guards, keeping your trousers clean.These mountain bike fenders are easy to clean and allow you to enjoy your bike ride with ease

Usability: Our bike fender sets are suitable for most types of bikes, such as mountain bikes, road bikes, city bikes, etc. The mud bike fender is suitable for all diameter bicycle front tubes, such as 28.6 mm, 31.8 mm, 34.9 mm.

【 For MTB & ATB (24-29 inches)】: The mudguard is universally suitable for 24-29 inch mountain bikes and all-terrain bikes

【Best protection from dirt 】 : Prevent the bike from splashing in the mud and rain while ensuring the fun of riding

【High-quality materials】: The fender is made of high-quality, durable, high-performance polypropylene material that can be stretched without deformation. PP plastic can withstand heavy loads and has no peculiar odor

Children bicycle front and rear mudguard set. Made from a tough flexible plastic that won't rust and can be easily cleaned.

Can well prevent your bicycle or bike from the mud. Keep your bicycle dryer and cleaner, to solve the trouble of the rainwater.

Streamline shape, stylish appearance. Light weight and easy to assemble, quick release.

【Flexible and Durable】 The long lasting engineering plastic is used for making these super sturdy mountain bike fenders. With amazing toughness, excellent flexibility and extension, they could withstand high temperature, long-term exposure, not easy to crack or break, keep thickness of 1.2 mm, thin enough to fit nearly all kinds of tire size, can even be folded many times.

【Simple to Install & Easy to Disassemble】 Freely deformed, customized for bicycle front and rear fork. 10 adjustable heavy duty cable ties help attach the fenders wherever on the bike (eg. fork, bridge and stanchions). Freely adjust the mudguard length to conform the bicycle, no need to worry about sliding when properly installed. The straps can be quickly disassembled and installed if needed.

【Ultra Lightweight & Fashion Appearance】The lightest MTB mudguards available on the market, perfectly meet the need of reducing bike weight. Adopts modern design - stylish Carbon Fiber 3D Texture make your bicycle look more cool and textured. Our Extremely flat and flexible fenders can be stuffed in a backpack on travel, super easy to carry.

【Applicable models】Suitable for most kinds of bikes, like MTB, road bike, city bike and so on. But can't fit the bike which rear pole diameter is smaller than 22mm.

【bike reflective strip】A Gift 26 feet long reflective strip for DIY Your can stick it to any products Let you be safe at darkness

【Security and protection】fit Bicycle Front Fork OR Rear Seat chainstay (for disc brake use only), it protects your fork stanchions and bridge from getting caked, reducing the need for cleaning and servicing

Provides 160 degrees of coverage to wheels, ensures minimum amount of water and mud is spilt on riders

Durable, deform resistant plastic frame

Stainless steel support arms riveted triangularly, ensures stability

Rear: Approx.41x10cm Front: Approx.57.5x10cm

Suitable Tube Diameter: Less than 34mm bike

100% brand new with high quality/Material: Enineering Plastic

Package includes: 2PCS Plastic Bike Mudguard Fenders

Material: Plastic

Capacity: big-26.5*22cm/10.43*8.66inch, small-9*8cm/3.54*3.15inch

PP RELIABLE MATERIAL: The bicycle mudguard is made of thermoplastic resin PP, soft, flexible, strong and durable, and will not break when folded, allowing you to ride more smoothly in rain and cement water.

CLEAR PERSONALIZED PATTERN: Stone carving 3D carbon fiber 3K twill and color printing technology, the pattern is clearly visible, highlighting your individuality.

PROTECTION FUNCTION: The bicycle mudguard is waterproof and wearable , which can effectively block mud spray and protect the front fork and rear frame from being soiled.

Fit for 20inch 26inch Snow Bike

Keep your bicycle dryer and cleaner.

Light weight and easy to assemble.

This mud guards keeps your body dry on wet roads.

Size: 33 x 10cm/13 x 3.94inch.

Easy installation with no tools required -The minimalist but ingenious flat design turns into a curved rear mud guard once inserted into the rails of your saddle!

Rear Fender Length:28cm/11.02inch;Rear Fender Width:5.5cm/2.17inch

Front Fender Length:35cm/13.78inch;Front Fender Width:5.5cm/2.17inch

Made of high strong PA plastic material,durable

【Size】- 14 INCH front length 365mm, rear length 420mm width 50mm; 20 INCH front length 480mm rear length 580mm width 50mm

【Durable】- High Quality plastic pp material, very durable, bendable and no unbreakable

【Design】- This premium classic mudguard set designed for 14'' 20'' folding bikes with V -Brake System

✅Rollable -- YF SMART fender pack very small. They can be rolled on your frame or simply stored in your bag, pocket or hung on your key chain. Front and rear piece can even be rolled together for convenient packing or storage.

✅Durable -- The rear mudguard features a unique folding system and a revolutionary mount design which make it sturdy on its own. No need for support by a brake bridge or squeezing the fender between the seat stays. Swivel is prevented by two silicone-coated hook and loop straps. This means it can even be mounted on a bicycle seat post making it suitable for a wide variety of riding styles such as road, gravel, touring, packing, commuter, cyclocross, cargo, and even MTB.

✅Perfect fit -- This set of fully detachable front and rear fenders roll up, so they can only be used when needed and store up easily when they are not. Fitting various bike types.