Best Keehui Boat Hardware in 2026

Bimini cotter pins with lanyard stainless steel are durable and long lasting used with bimini boat top

Bimini quick release 1/4 inch clevis pin with lanyard, spring loaded toggle pins slidable springs with toggle pin for easy changing on different size bimini

Marine stern bow eye 3/8" shafts have rolled threads

Boat bow eye 3-3/4" total length (2" length for outside bow eye) max safe load is 3,500 lbs

Quick release bimini top hinge snaps into base and stays attached to bimini when seperated.

Bimini top mounting brackets, the size: L*W*H=3-1/2 inch * 1-1/4 inch * 1-3/8 inch, ​The distance between the two holes: 2-1/2 inch

Quick release bimini top hinge with quick hinge Fitting Swivels 360 Degrees

Bimini top deck hinge is easily remove or install with stainless steel screws.

Stainless steel bimini top hardware quick release deck hinge with mirrior polished finish which are highly beautiful for boat.

Bimini mounts quick release hinges snaps into base and stays attached to bimini when seperated.

Bimini top quick release hinges with quick button to push which is easy to operate.

Rope tie off cleats 5 inch Pontoon Boat cleat stainless steel marine 316, The horizontal and vertical distance are 2.12 inch (53.8mm) and 0.99 inch (25.3mm) from center to center between two holes.

5 Boat cleats decorative cleat wall hooks can be used for boat dock, pontoon, etc. which is stainless steel heavy duty open base and easy to set up.

Open base cleats stainless steel marine 316, the horizontal and vertical distance are 1.9" (48.3mm) and 0.87" (22.3mm) from center to center between two holes.

Marine cleats dock stainless steel heavy duty including 4 inch cleat, 5 inch cleat

Boat top bimini swivel deck hinge universal fit - allows mounting in almost any angle. Horizontal or vertical mount.

Bimini top deck hinge with right size which are overall length 2-3/4"（70mm) overall width 1-1/8" (25mm) overall height 1-3/4" (45mm)

Bimini universal hinge deck mount swivel allows deck hinge to be mounted on almost any angle for Snug fit for most Bimini Tops.

Bimini top deck hinge, pack of 2 Bimini Deck Hinge, without M6 screws, Insert Rubber Pad is included

Boat deck hinge swivel mount to mount our binimi top use with any bimini top cap fitting with since they perfectly swivel for any surface.

Boat side mount deck hinge is highly polished mirror finish which is high grade beautiful solution.

Stainless steel bimini mounts deck hinge can be rotated 180 degrees which is ideally used for boats / yachts / cars / trailers.

Bimini top mounting brackets which the distance from center to center between 2 holes is 1.57" (40mm).

Bimini hinges quick release bimini top rod holder for boat, the dimmension is 2-1/3" long x 3/4" wide, 1" high.

Quick release boat pins fit 1/4 inch removable pin, drop cam & spring grip & lanyard prevents loss. with size 1.57"(40mm) Long and 0.24"(6mm) Diameter. The lanyard length is 7inch/180mm.

Bimini top parts deck hinge with quick release boat pins are for boat, bimini top mounting hardware, kayak, canoe rigging, etc.

Bimini top deck hinge which 316 stainless steel has stronger anti-rust, abrasion resistance.

Bimini top hinge with the surface highly polished which is high grade finish.

Bimini mounting bracket with 4 pcs stainless steel screws which are easy to install.

Bimini eye end cap internal version for 1" tube rail

Nylon bimini caps top eye end cap inside version for 1", pack of 2 pieces.

Boat nylon hinges bimini fittings 6 pcs nylon eye end caps, 4 pcs nylon jaw slides, 2 pcs black nylon deck hinge with screws

Boat nylon fittings bimini top eye end caps black nylon jaw slides flat mount black nylon deck hinge

Boat tie down cleats 4 inch for small boat which the rope cleats have fasteners included, the bolts are 1.96 inch / 50mm length

4 inch nylon cleat as kayak anchor cleats for boat are made using the highest quality components, high impact nylon black

Marine cleats 4 inch line cleat for boat dock as rope tie off boat deck accessaries and boat deck hardware.

Dock ties for boat rope cleats 4 inch also can be used for pontoon boat cleat.

Boat dock cleats 4 inch wall hook also can be decorative boat cleats hooks or cloth hooks for home wall, cabinets, boat fender, pontoon boat cleats or floating dock cleats.

kayak cleats for boat dock 4 inch deck cleat are easy to install and fast shipping from USA.

4 dock cleats boat rope tie off cleat are in black color which are durable construction made to last under freshwater and salt water.

Boat cam latch with a red dot on one side of the handle allows you to quickly check from a distance which compartments/hatches are latched.

Flush cam latch with an installation includes a cam and backing plate and fasteners included. The hatch latch with fasteners which is easy to install.

Multi-purpose Application: stainless steel lanyard tether loops braided flexible lock for loss prevention camera device luggage lock safety cable outdoor travel family. Can link, hook clip and lock. such as lightning cables, picture display, garden lines, DIY light strings, etc.

Lightweight safety loop cable. Packaging: 10 pcs 12inch / 30cm viny coated steel wire rope.

Black nylon eye end caps, nylon jaw slides, nylon deck hinges, stainless pad eyes and screws, for two sizes: 7/8 inch and 1 inch ( plz select the right listing for right size before buying)

Black nylon bimini top fittings 7/8 inch tube nylon hardware, black nylon bimini hardware, screws included for set up easily

Hunting climbing sticks cam cleat is made of gasket Nylon. Light weight (Weight:50g), good wear resistance, suitable for marine boats and sailboats

Boat rope cleats track mount with two version which plus the one with with flared entry leading ring allows easy line engagement. Using the progressive tooth. which ensures maximum holding all types of rope.

Boat tie down cleats 6 inch for small boat which the rope cleats have fasteners included, the bolts are 1.96 inch / 50mm length

6 inch nylon cleat as anchor cleats for boat are made using the highest quality components, high impact nylon black

Marine cleats 6 inch line cleat for boat dock as rope tie off boat deck accessaries and boat deck hardware.

Dock ties for boat rope cleats 6 inch also can be used for pontoon boat cleat.

Boat cleat wall hook also can be decorative boat cleats hooks or cloth hooks for home wall, boat fender, pontoon boat cleats or floating dock cleats.

kayak cleats for boat dock 6 inch line cleat are easy to install and fast shipping from USA.

6 dock cleats boat rope tie off cleat are in black color which are durable construction made to last under freshwater and salt water.

Black nylon eye end caps, nylon jaw slides, nylon deck hinges, stainless pad eyes and screws, for two sizes: 7/8 inch and 1 inch ( plz select the right listing for right size before buying)

Bimini top fittings set, black nylon bimini hardware, screws included for set up easily

Marine hatch lock pull handle cam latch locking arm, the height is adjustable which is secured with set fasteners. boat latches are versatile cam latches designed for a wide range of boating and other outdoor applications.

Flush Turning Lift Handle Lock, 3.68 inch Length and 2.99 inch width. overall height: 4.92 inch. The Screw hole on the patch is 0.21 inch.

Bimini fittings set included: 6 pcs nylon eye end cap fittings (outside version), 4 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws.

Two sizes: 7/8 inch and 1 inch ( plz select the right listing for right size before buying)

Marine cleats 4 inch rope cleat tie off dock cletes is flat top style with 2 holes. The distance between two holes from center to center respectively of the cleats is 1.18" (30mm).

Boat tie down cleats for dock cleat 4 inch. pack of 4 sets included fasteners. The bolt length is 2"/50mm.