Best Sram Brake Hoses in 2026

The Road Pro brake cable and sheath kit is powerful, durable and lightweight

Designed for high-end road bikes, the jacket is uncompressible as reinforced with Kevlar to optimise braking performance.

The sheath has a pre-lubricated inner liner (SLICK-LUBE) which reduces friction and improves the feeling of braking

Cable clamp screw hole diameter: 6.5mm, fit for 6mm ( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 5/8 inch. Fit for 5/8 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application.

The Eastwood 5/8 Inch Fuel Line Mounting Hardware Kit Will Allow You To Complete Your Brake Line Project With Perfect Professional Results.

High Quality SS 304 Construction, Epdm Rubber Insulation

Convenient and Environmental Protection - you can easily disassemble and install it, just use the tools in your garage, then the project will be more perfect. The material of the hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.If you are a person who cares for the environment, this will be a good choice

Firm and Neat - our hose separators are used to improve the tightness between multiple tubes, then your line will become more organized and neat. And the project will become more pleasing. It will be very necessary, especially in cars or other small spaces

Strong Compatibility and Reusable - This product is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on

Made in Taiwan, using the best quality materials, worthy of your trust.

A roll of 50 feet, about 15.2 meters, is enough to assemble five bicycles.

External diameter is 5mm, extra 30 PCS 5mm Brake Cable End Caps saves you the trouble of buying additional components.

Perfectly fits for shimano BH90 system

Compatible with Shimano DEORE SLX XT XTR

Suitable for Shimano M7000/M8000/M9000 M615/M675/T750/M785/M985

Outer: CGX Coil-wound Steel w/Slick-Lube Liner (0.2 x 11.8 inches (5.0 x 3000 mm)

Inner Cable: Slick Stainless (F/1350mm, R/2350mm)

Shimano / SRAM compatible

Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles

Position-specific - manufactured to precise measurements to provide an exact fit and easy installation

Quality assured - materials tested to exacting government-regulated safety and durability standards

1/4 id fuel line NBR 10ft 1/4 inch fuel line hose 4AN 6mm

fuel line hose Uses: Agriculture/Mmachinery/Cars/Trucks/ Tractors/ Small Engines

Applicable Fuel System： Astma grade oil resistance, E10 diesel resistance, E85 gasoline，transmission oil, brake oil, engine oil antifreeze，Ethanol, Lubricants .

Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation

Premium brass fittings provide an excellent hydraulic seal

Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety

Secures brake hose to bracket where it meets the steel brake line

Silver Zinc Plating

Pack of 5

✅HIGH QUALITY MATERIAL - The 3/8 fuel line covered with high quality woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance.

✅NYLON BRAIDED - The 3/8 fuel hose can stand -104ºF to +302 ºF/-40ºC to +150ºC 350 PSI Working Pressure Tolerance, the 3/8 transmission cooler hose has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..

✅FLEXBILITY - The highlight of this 3/8 fuel injection hose is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this 3/8 high pressure fuel line makes it easier to install. It also results in more fluidity in transmission.

Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles

Position-specific - manufactured to precise measurements to provide an exact fit and easy installation

Quality assured - materials tested to exacting government-regulated safety and durability standards

SRAM and Shimano Road compatible

20% lighter than a traditional kit

Uncompressible sheath for precision

Hot Rod Chrome Aluminum 90 Degree Intake Manifold Vacuum Tee 3/8" NPT (National Pipe Thread)

Made from aluminum then polished and triple chrome plated

Fits all 3/8" NPT (National Pipe Thread) Intake manifolds, 3/8" Hose Barb on one side 1/4" Hose Barb on the other

☆ MODEL - Applicable BH90 written on the original brake hose, m506、m596、m615、m666、m675、m7000、T750、m785、m8000、m8020、m985、m9000、R7020、R7025、R8020、R8070、R9170、R9120、R9180、R7070、R8070、R9170 etc. Matters needing attention (cutting the hose needs to be cut flat, otherwise the copper connector will be easily torn when inserted into the hose)

☆ HIGH PRESSURE ANTI-RIOT TUBING - DuPont Kevlar bulletproof fiber + Teflon reinforced braid and inner tube. High-quality materials make it extremely compressive.

☆ HIGHLY APPLICABLE JOINTS - Higher-purity pure copper olive head and oil needle have super high weather resistance after pressing and deforming tightly. Wider adaptability to various brake fluids. No matter what kind of brake fluid, there is no need to worry about its aging and oil leakage, even if it is soaked in the brake fluid or exposed for a long time.

Convenient and Environmental Protection - you can easily disassemble and install it, just use the tools in your garage, then the project will be more perfect. The material of the hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.If you are a person who cares for the environment, this will be a good choice

High Quality Material: The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -6AN SS Braided Hose Secure Tight with Hex Allen Head Bolt.More easy for you to install them.

Strong Compatibility and Reusable - We guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on

✅ HIGH-QUALITY MATERIAL - The 5/16 fuel line is made of 3-layers. The inner and the outer pipe are made of NBR rubber and the middle reinforcing layer is braided with polyester woven. Wall thickness is 3mm. Oil resistant, cold-resistant, and ethanol tolerance.

✅ HIGH PSI RATING - The 5/16 hose has a pressure rating of 300 PSI Working Pressure, and holds up to a max of 1200 PSI. The 5/16 fuel line hose thrive across the temperature range of -95°F to 257°F. The 5/16 transmission hose has good retardancy and excellent corrosion resistance.

✅FLEXIBILITY - The highlight of this 5/16 transmission cooler hose is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this oil 5/16 oil cooler hose makes it easier to install. It also results in more fluidity in transmission.

Suitable for Level Ultimate/TLM

Length: 2000 mm.

Colours: black.

Universal braided fuel line kit is 3/8 inch by 3 ft in length. 1Year 100% Quality Guarantee

High pressure resistance, long lasting of use;Max. Burst Pressure 400 PSI;Max. Working Pressure 10 PSI

Specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, powersteering fluids and nitrous oxide.

EFFECTIVE TOOL: The Hose Pinch Off Pliers Set to save coolant and consume less time works as a lifesaver when its being applied for fuel line or coolant maintenance; Very easy to pinch off cooling hoses and not losing coolant and its spreading all over engine on specific tasks like replacing valve cover gaskets; No need for draining systems before servicing; Ratcheting jaws allow for automatic locking to save you even more time

SIMPLE AND EASY: The ratcheting mechanism on the hose clamp pinch pliers is utilized to shut the jaws and squeeze to close your preferred cooling hoses; Plier jaws swivel to perform a complete shutdown.

PACKAGE CONTENTS: 3pcs hose pliers pinch make a 3-in 1 set package that includes a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long panel tool with a 2-inch (5.1cm) contact area

Perfectly fits for shimano BH90 system

2000mm tube is long enough to fit for your needs

Compatible with Shimano DEORE SLX XT XTR

100% QUALITY MATERIAL:Stainless Steel Braided + CPE Synthetic Rubber; The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.

EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on.

USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 248 F(-40°C to +120°C) under most operating. Working Pressure:1500 PSI

【3 Size to Select】6 hose pinch off pliers for all your projects; measure 6-1/2 inch, 7-5/16inch, 10inch in length

【Non-Damaging Jaws】Hose clamp pliers are made of safe nylon ,Non-conductive, durable.Rounded jaw edges mean not damage your sensitive auto parts

【Locking in Place】Hose Pinch plier is designed with non-slip handle and safety buckle which can adjust the position of the buckle according to the size of the hose

GM recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured with GM original equipment specification for fit, form, and function

Replacement hydraulic hose kits for all Guide brakes

2000mm hose length

Original Equipment hydraulic hoses for no-compromise brake performance

Ideal replacement - precision-engineered to match the performance of the original brake hose on specific vehicles

Position-specific - manufactured to precise measurements to provide an exact fit and easy installation

Quality assured - materials tested to exacting government-regulated safety and durability standards

Material: Copper/Steel.

Bicycle brake olive and barb are compatible with Shimano DEORE SLX XT XTR.

Precision CNC made,High Quality metal, Perfectly fits shimano BH90 hose.

DEDICATED PROPANE CYLINDER BRACKET: 304 stainless steel propane tank fixed tray size 13*13in, with an inner diameter of 9.84in round hole, can firmly place the propane cylinder, durable and not rusty, can be used for outdoor placement；

UNIVERSAL WHEELS WITH BRAKES: The propane tank mobile tray has 4 universal wheels, which can move in a 360° direction. You can place heavy objects on the tray and move it, which is convenient and easy to avoid body damage caused by carrying heavy objects. ; Two of the wheels are equipped with brake function, which can be stably placed on slopes inclined 0~30°；

ANTI-SCRATCH AND STABLE DESIGN: There is an anti-scratch belt on the edge of the tray to prevent the surrounding items from being scratched during the movement; the bottom wheel has a heightening piece to increase the stability of the placement, and the height of the base can be reduced by 0.5 inches after disassembly；

PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality Nylon, thus preventing it from rusting and corrosion. The 3/8 fuel line also has a wall thickness of 3.25mm.

BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 transmission hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 oil hose comes as a roll of 10 feet long enough for a wide range of applications.

QUALITY TESTED ◀The 10mm fuel line is double annealed making it easy for bending and flaring. You can cut the 3/8 oil cooler hose according to actual needs to better meet your needs. Oil resistant, temperature-resistant, and ethanol tolerance. The 3/8 id transmission hose can hold up to -68°F to +212°F, a lot stronger to heat and extreme circumstances.

Aluminum hose separators fit for AN 6 hose ( Pack of 2 pcs )

Size: ID 13.5mm, Surface treatment: siliver polished

Made of high performance lightweight 6061-T6 CNC machined billet aluminum