Best Launch Brake Tools in 2026

[Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises

[Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines; For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing

[Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car); 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily

[Fix Your Car at Home]: Complete automotive fixes at home using the ABN Spring Hook and Headlight Adjuster; Use the T-Shaped angled hook to remove exhaust pipe springs, seat or tank holding, brake springs, or headlight adjusting springs

[Use on Multiple Vehicles]: Fix vehicle brakes, riding lawn mower decks, and other equipment using the universal T-handle tool; For removing muffler springs, removing tight drum brake springs, pulling flat agitators out of top load washers, installing snow blower springs

[Reach Any Tight Space]: T-style handle is easy to grip and provides extra leverage; Hook end angled at 30-degrees for access in tight and confined spaces; Heat-treated alloy construction for strength and longevity

DRIVE SAFELY WITH THIS BRAKE GAUGE SET: The more you drive, the more your brakes will wear down; The ABN Brake Measuring Tool Brake Pad Measuring Tool is designed for you to easily identify your brake lining thickness and determine when you will need new brake pads; Brake thickness should not be less than 0.0787 inch (2mm)

COLOR CODED: This brake shoe thickness gauge is designed to quickly and easily identify brake thickness; Brake thickness gauge comes in red, green, and yellow for effective and efficient brake pad measurement

EASY TO USE: For brake pad measuring, simply fan out the brake lining thickness gauge and line up your brake pad with the brake pad gauge tool to determine the thickness of your brakes; Each blade of this brake measurement tool has both SAE and Metric measurements

PROFESSIONAL AUTOMOTIVE TOOLS: The ABN 18-piece Brake Caliper Set and 8-piece Drum Brake Kit is designed to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors; Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks

BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity; This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles; All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals

DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes; Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project

MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs; Choose an adapter, connect your existing shop air line, press pressure button and rotating lever to wind back brake piston, press release button, and pull rotating lever to move push piston axle backwards for dismounting tool caliper

FITS YOUR VEHICLE: Drive key adapters for GM, Citroen XM & Zantia, Citroen CXM, Citroen C5, Alfa Romeo, Alfa Romeo 164 2.0 Saab 9000, Audi, Audi 80/90 & V8, BMW, Ford, Honda, Honda Prelude Isuzu, Jaguar, Jaguar XI40, Mercedes, Mitsubishi, Nissan, Nissan Bluebird, Nissan Silvia, Nissan Maxima Rover, Toyota, Toyota Celica & Corolla GR & MR2, Volkswagen (VW), VW Golf/Pas-Sat Corrado/GTX 16V/Scirroco, Volvo, Mazda 323.626, Primera 2.0L VW Golf IV, Rover 800, Subaru L & 2 Series, Opel, Ford Mondeo

BUILT TO LAST: Pneumatic body constructed from solid heat-treated cast anodized aluminum; Moving parts constructed from chrome alloy steel (chrome finished rotating lever, phosphate finished holder, and anodized aluminum handle); Each adapter is permanently etched with size for quick identification

PROFESSIONAL GRADE AUTOMOTIVE TOOLS: The ABN 15-piece Drum Brake Service Kit is designed to allow you to remove and replace worn and broken brake parts and to make it easier to reach other parts; These rear brake tool sets are designed to be used on most foreign and domestic cars and trucks

SERVICE YOUR VEHICLE BRAKES: Whether you are a seasoned mechanic or a home mechanic, this automotive tool set allows you to service your vehicle brakes by making it easy to replace springs, check your pads, and reach other parts of the drum brake system

EASY TO USE: The spring installer, remover, and retainer tools help to adjust brake springs safely to get to deeper parts of your brake system while the various adjustment spoons help you adjust clearance between the drum brake and brake shoe; The 8 brake lining thickness gauges help you to identify thickness levels to know when its time to change your pads

WORK ON DRUM BRAKES: The ABN Drum Brake Shoe Return Spring Install & Remove Dual-End Pliers Installer & Remover Tool for Removal and Installation is a 2-in-1 double-ended tool that allows you to save time and effort when removing, replacing, and installing shoe return springs on most drum brakes; This tool acts as a second pair of hands so you can remove and install springs in an instant

EASY REMOVAL: Socket end of tool removes the spring from an anchor stud so you can fully replace the shoe return spring

EASY INSTALLATION: Notched end of tool installs spring on anchor; Slotted arm guides the spring hook into position in the anchor hole while the handle end is used to fasten the post of the anchor-type springs

SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads; This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder

FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals; Press bearings and races into an open hub wheel assembly on most European and American cars; Some tools in the kit are disk brake specific, such as the caliper piston retractor; If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston

BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity; The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism; Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring

MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more; Fixed head and angles make clean, precise flares; Yoke type compressor with T-bar handle for firm grip; Cone for accurate alignment; For 3/16", 1/4", 5/16", 3/8", 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing; Adapters included

QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing; Pull back the blade and revolve the pipe while compressing; 2 rollers prevent skipping and jumping for most consistent tracking; Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut

BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction; Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion

REMOVE AND INSTALL BUSHINGS: Use the ABN Master Bushing Driver 33-Piece Set – Metric & Standard SAE Removal & Installation Tool Kit on bushings, bearings, and seals ranging from 10mm to 42mm and 3/8 inch to 1-3/8 inch in diameter on your car, truck, farm tractor, lawn mower, construction equipment; Includes large 5.5-inch (14cm), medium 5-inch (12.7cm), and small 4-inch (10.2cm) driver handles with 1.5-inch (3.8cm) knurled ends and O-rings on other end to retain driver; All steel construction

EASY TO USE: Simply install a driver (select based on the size of sleeve that is to be removed and replaced) on the appropriate handle (large side of driver away from handle), the larger outer diameter (OD) of the driver will catch the sleeve and pull it through, then tap the handle gently with a hammer

VARIOUS SIZES INCLUDED: Metric – 10-12mm, 12-14mm, 14-16mm, 16-17mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-36mm, 35-40mm, 38-42mm; SAE – 3/8”x7/16”, 7/16”x1/2”, 1/2"x9/16”, 9/16”x5/8”, 39/64”x11/16”, 5/8”x3/4”, 11/16”x13/16”, 47/64”x7/8”, 13/16”x15/16”, 55/64”x1”, 15/16”x1-1/16”, 1”x1-1/8”, 1-1/16”x1-3/16”, 1-1/8”x1-1/4”, 1-3/16”x1-5/16”, 1-1/4”x1-3/8”

[Complete Your Project]: Align, bend, fit, change, and adjust automotive lines with the ABN Brake Tube Bender Pliers

[Fits Your Lines]: Small brake line bender tool compatible with brass, copper-nickel alloy, stainless steel, mild steel, and other 3/16 and 1/4 inch small diameter brake, AC, fuel lines, and hard lines

[For Tight Spots]: Brake pipe bender tool makes tight radius bends that are small and complex; Make tubing shape adjustments even when installed in vehicle with small clearance between inner wells and tube

[Brake Line Flaring Made Easy]: To efficiently double or single flare in copper pipe, aluminum, brass, magnesium, and soft steel, use the ABN Brake Line Flaring Tool Kit

[Less Friction for Your Projects]: Excessive friction can cause stress and wear on tools and break tubing; Double flare tool kit includes swivel constructed out of alloy steel and chrome plated to reduce friction

[Built to Last]: Brake flaring tool kit forged from heat-treated steel; Double flaring tool kit will not crack or break under pressure after repeated, extended use

BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses

4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads; Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool; This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles; Works on both fixed and floating calipers

RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle

QUICKLY REMOVE AIR FROM YOUR BRAKE SYSTEM: Brake jobs are some of the most common vehicle maintenance jobs that can be done at home; The ABN One Man Brake Fluid Bleeder Kit includes everything you need to quickly and easily remove air from your brakes without creating a mess; Rather than waiting hours for gravity to bleed your brakes, get this simple brake fluid tool to bleed your brakes in minutes

ONE MAN BRAKE BLEED KIT WITH MAGNET PLATE: After changing your brake pads, you will need to remove any air from the brake system to make it work correctly; This one man brake bleeder tool kit allows you to bleed your brakes by yourself by providing a magnetic plate that will hold the bottle upright while you focus on other aspects of the job

EASY TO USE: Hook a brake bleeder hose to the brake fluid catch bottle and to the brake bleeder valve on the brake furthest from the master cylinder; Open the vehicle bleeder valve and press the brake pump pedal a few times; When the brake fluid hose is full with no air bubbles, close the bleeder valve and repeat with other wheels; Always be sure to fill your master cylinder reservoir with brake fluid (refer to vehicle manual for correct type)

[Service Done Right]: From pads to pistons to fuel lines, service your disc brakes with the ABN Disc Brake Caliper Tool Set; 32 pieces set includes the most important tools needed to get the job done right

[Contents]: Brake service tools include 3 brake bleeder wrenches, 3/8in caliper wrench, 6 torx sockets, 6 hex bit sockets, 2-prong adapters, disc adapters, brake pad spreader, tube bender, tube cutter, 2 and 3 pin brake piston tools, T-handle brake caliper press tool, and caliper plate

[Complete Various Projects]: Open and close brake cylinder screws for bleeding, remove and install caliper mounting bolts, reset brake pistons, change brake pads, cut or bend pipes or tubes, and so much more with this complete disk brake tool kit

[Complete Any Brake Job]: Get your vehicle back on the road with the ABN 3/16-inch Brake Line Kit Double Flaring Tool with Handle; Copper flaring tool uses pressure to create perfect 45 degree double flared joints without crushing or marring the tubbing or piping

[Handheld Use]: Slide pipe into the back of the flare tool block against the positioning bolt and clamp shut; OP1 side of double flare dies create a bubble flare, then the OP2 side die finishes the double flare

[Under the Car or On the Bench]: Compact design allows you to work easily in tight places or under cars to fix brake lines; Handheld flaring tool handle can be removed so you can mount the clamp head to your bench vise for other 3/16-inch (0.5cm) flaring jobs like water, gas, or refrigeration lines