Best Contemporary Cabinet Hardware in 2026

Contemporary cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 1 5/16 in (33 mm)

Length (from left to right): 2 in (50 mm), Width (top-to-bottom): 11/16 in (18 mm), Projection (front to back): 1 5/8 in (42 mm)

Traditional cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 3 3/4 in (96 mm)

Length (from left to right): 4 9/16 in (116 mm), Width (top-to-bottom): 13/16 in (20 mm), Projection (front to back): 1 1/8 in (29 mm)

Contemporary cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 3 1/8 in (80 mm)

Length (from left to right): 3 15/16 in (100 mm), Width (top-to-bottom): 11/16 in (18 mm), Projection (front to back): 1 5/8 in (42 mm)

A classic design to enhance the ambience of your kitchen or bathroom

Center to Center measurement (distance between the drill holes): 3 in (76.2 mm)

Length (from left to right): 5 5/32 in (131 mm) | Width (top-to-bottom): 1 21/32 in (42 mm) | Projection (front to back): 13/16 in (21 mm)

Classic metal drop pull handle features a central bead detail and is connected to round posts at each end

Center to Center measurement (distance between the drill holes): 4 1/4 in (108 mm)

Length (from left to right): 5 19/32 in (142 mm) | Width (top-to-bottom): 2 3/32 in (53 mm) | Projection (front to back): 25/32 in (20 mm)

Classic metal cup pull by Richelieu

Center to Center measurement (distance between the drill holes): 3 25/32 in (96 mm)

Length (from left to right): 4 17/32 in (115 mm) | Width (top-to-bottom): 31/32 in (25 mm) | Projection (front to back): 31/32 in (25 mm)

Add a touch of elegance to your kitchen and bathroom cabinets with this classic Richelieu handle

Center to Center measurement (distance between the drill holes): 3 in (76.2 mm)

Length (from left to right): 3 13/16 in (96.5 mm) | Width (top-to-bottom): 13/16 in (20.3 mm) | Projection (front to back): 1 1/8 in (28.6 mm)

This sleek pull has a tubular stainless steel bar and metal posts to give a modern aesthetic that blends well with any kitchen or bathroom decor

Center to Center measurement (distance between the drill holes): 16 3/8 in (416 mm)

Length (from left to right): 16 7/8 in (429 mm) | Width (top-to-bottom): 1/2 in (13 mm) | Projection (front to back): 1 1/4 in (32 mm)

Contemporary cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 5 1/16 in (128 mm)

Length (from left to right): 5 13/16 in (148 mm), Width (top-to-bottom): 11/16 in (18 mm), Projection (front to back): 1 5/8 in (42 mm)

Traditional cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 3 3/4 in (96 mm)

Length (from left to right): 4 7/16 in (112 mm), Width (top-to-bottom): 9/16 in (14 mm), Projection (front to back): 1 1/8 in (28 mm)

The symmetry of beads and rings along the handle of this classic pull will enhance the sophistication of any room

Center to Center measurement (distance between the drill holes): 7 9/16 in (192 mm)

Length (from left to right): 8 9/32 in (210 mm) | Width (top-to-bottom): 31/32 in (25 mm) | Projection (front to back): 1 31/32 in (50 mm)

Give your home design the modern look it deserves with the unique twisted shape and audacious style of this contemporary pull

Center to Center measurement (distance between the drill holes): 3 25/32 in (96 mm)

Length (from left to right): 4 7/8 in (124 mm) | Width (top-to-bottom): 23/32 in (18 mm) | Projection (front to back): 1 1/4 in (32 mm)

This traditional barn door pull can similarly be used as a cabinet or drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 5 1/16 in (128 mm)

Length (from left to right): 6 5/16 in (160 mm), Width (top-to-bottom): 1 3/16 in (30 mm), Projection (front to back): 1 1/8 in (29 mm)

Traditional cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 4 in (102 mm)

Length (from left to right): 4 5/16 in (110 mm), Width (top-to-bottom): 13/16 in (21 mm), Projection (front to back): 1 9/16 in (40 mm)

This classic Richelieu handle features an attractive natural center with elongated ends

Center to Center measurement (distance between the drill holes): 3 in (76.2 mm)

Length (from left to right): 5 in (127 mm) | Width (top-to-bottom): 3/4 in (19 mm) | Projection (front to back): 1 1/4 in (32 mm)

The symmetry of beads and rings along the handle of this classic pull will enhance the sophistication of any room

Center to Center measurement (distance between the drill holes): 3 25/32 in (96 mm)

Length (from left to right): 4 3/8 in (111 mm) | Width (top-to-bottom): 25/32 in (20 mm) | Projection (front to back): 1 25/32 in (45 mm)

Modernize your kitchen and bathroom décor with this transitional Richelieu pull

Center to Center measurement (distance between the drill holes): 6 5/16 in (160 mm)

Length (from left to right): 7 3/32 in (180 mm) | Width (top-to-bottom): 21/32 in (17 mm) | Projection (front to back): 1 3/8 in (35 mm)

Massive and simple at the same time, this rustic pull will definitely add the special final touch you were looking for

Center to Center measurement (distance between the drill holes): 12 5/8 in (320 mm)

Length (from left to right): 13 1/4 in (336 mm) | Width (top-to-bottom): 5/8 in (16 mm) | Projection (front to back): 1 21/32 in (42 mm)

Contemporary metal edge pull by Richelieu

Center to Center measurement (distance between the drill holes): 1 31/32 in (50 mm)

Length (from left to right): 2 3/4 in (70 mm) | Width (top-to-bottom): 1 9/16 in (40 mm) | Projection (front to back): 1/4 in (6 mm)

An elegant and timeless addition to your cabinets and furniture

Center to Center measurement (distance between the drill holes): 3 in (76.2 mm)

Length (from left to right): 4 7/8 in (124 mm) | Width (top-to-bottom): 19/32 in (15 mm) | Projection (front to back): 15/16 in (24 mm)

With its elegant arched handle and flared ends, this pull is a true classic that will enhance the décor of any kitchen or bathroom

Center to Center measurement (distance between the drill holes): 5 1/32 in (128 mm)

Length (from left to right): 5 21/32 in (144 mm) | Width (top-to-bottom): 5/8 in (16 mm) | Projection (front to back): 1 9/16 in (40 mm)

Classic metal cup pull by Richelieu

Center to Center measurement (distance between the drill holes): 2 17/32 in (64 mm)

Length (from left to right): 3 3/32 in (78.5 mm) | Width (top-to-bottom): 7/8 in (22 mm) | Projection (front to back): 29/32 in (23 mm)

Classic metal pull by Richelieu

Center to Center measurement (distance between the drill holes): 5 1/32 in (128 mm)

Length (from left to right): 5 3/4 in (146 mm) | Width (top-to-bottom): 9/16 in (14 mm) | Projection (front to back): 1 7/32 in (31 mm)

Transitional and simple Richelieu handle with rounded corners and wide flanges

Center to Center measurement (distance between the drill holes): 5 1/32 in (128 mm)

Length (from left to right): 5 29/32 in (150 mm) | Width (top-to-bottom): 3/4 in (19 mm) | Projection (front to back): 1 3/16 in (30 mm)

Traditional cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 3 3/4 in (96 mm)

Length (from left to right): 4 3/8 in (111 mm), Width (top-to-bottom): 13/16 in (20 mm), Projection (front to back): 1 3/4 in (45 mm)

This traditional cup pull by Richelieu will enhance the look of your home décor with its discreet detailing

Center to Center measurement (distance between the drill holes): 3 17/32 in (90 mm)

Length (from left to right): 3 15/16 in (100 mm) | Width (top-to-bottom): 1 3/16 in (30 mm) | Projection (front to back): 23/32 in (18 mm)

This contemporary style Richelieu pull will add an elegant touch to your cabinet doors and drawer fronts

Center to Center measurement (distance between the drill holes): 7 9/16 in (192 mm)

Length (from left to right): 8 3/4 in (222 mm) | Width (top-to-bottom): 11/32 in (9 mm) | Projection (front to back): 1 3/32 in (28 mm)

Stylish and unique, this modern pull definitely gives an oustanding design to your contemporary theme

Center to Center measurement (distance between the drill holes): 5 1/32 in (128 mm)

Length (from left to right): 5 7/16 in (138 mm) | Width (top-to-bottom): 15/16 in (24 mm) | Projection (front to back): 1 1/16 in (27 mm)

The simple tubular design of this metal bar pull blends well with a variety of residential and industrial applications

Center to Center measurement (distance between the drill holes): 3 25/32 in (96 mm)

Length (from left to right): 6 15/16 in (176 mm) | Width (top-to-bottom): 15/32 in (12 mm) | Projection (front to back): 1 3/8 in (35 mm)

Contemporary cabinet and drawer handle for kitchens and bathrooms

Center to Center measurement (distance between the drill holes): 3 1/8 in (80 mm)

Length (from left to right): 3 15/16 in (100 mm), Width (top-to-bottom): 11/16 in (18 mm), Projection (front to back): 1 5/8 in (42 mm)