Best Aluminum Camera Lens Infrared Filters in 2026

Effect: Passes only infrared rays above 720 nm

Application: Nature, scenic, often used in crime detection, medical photography, detection of distribution of vegetation, etc.

Construction: Glass

Thread size (mm): 77

Effect / type: Monochrome

Multi-coating: Hoya multi-coated

HOYA UX CIR-PL Filter 77mm for optimal colour reproduction and reflex reduction.

The CIR-PL filter can be used on both film and digital cameras.

It prevents reflections on non-metallic surfaces such as water, glass and leaves.

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating

There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths

Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device

Ideal for Wide Angle Lenses.

Infrared 760nm

optical glass Screw-in filter

Available in all popular sizes.

►Ideal for Wide Angle Lenses. Slim:►3.6mm deep (not inc rear threads).

►Infrared 850nm

►Optical Glass Screw-in filter

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light

They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light

These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths

Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating

There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths

Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device

The Package Length of the Product is 9.4 centimeters

The Package Width of the Product is 9.4 centimeters

The Package Height of the Product is 2.2 centimeters

►Ideal for Wide Angle Lenses. Slim:►3.6mm deep (not inc rear threads).

►Infrared 950nm

►Optical Glass Screw-in filter

Hoya 77mm Sparkle 4x Multi-Coated Glass Filter - Hoya 1 Year Limited Warranty

Converts direct light sources topointed medium-sizedstars

Point bleed is minimized compared to regular star filter

Heliopan's premier 77mm Digital Filter has been specifically designed for digital cameras. It was constructed to be highly resistant to UV and infrared radiation, which results in greater color separation, color contrast and tone. Also, this Digital Filter performs exceptionally well under artificial lighting.

Constructed from the highest German Schott Optics, which guarantees incredible optical resolution. Our glass is specially ground and polished to minimize internal reflections, while ensuring that the quality of your images are not degraded by using our optics in front of your lens. It is also specially hardened to resist most impacts.

Our standard 8-Layer Multi-Coating minimizes reflections and does not interfere with the resolution of your camera optics.

MRC8 CREDIT FILTER: Uniformly applied MRC8 to eliminate unwanted glare and ghosting which easily get’s compounded at long exposures. Our MRC8 is structurally harder than the glass itself, providing a protective scratch-resistant layer, shielding the glass from the elements of frequent fieldwork.

X2 ND (NEUTRAL DENSITY) FILTER: Our X2 ND 3-stop features critically sharp H-K9L optical glass made in Japan. The moment you pick up X2 ND you’ll immediately feel the craftsmanship and quality. We precisely machine each X2 traction frame from environmentally friendly aluminum, and with it’s matte black finish reflections are absorbed rather than reflected into the lens barrel.

NANOTEC: In addition to state-of-the-art MRC8, our optical engineers developed new nano coating layer technology, called nanotec, from the ground up to repel dirt, water and other elements by beading rather than absorbing and smearing. Set in our completely weather-sealed X2 traction frame the X2 ND was built to withstand the harshest of environmental conditions.

MRC8 CREDIT FILTER: Uniformly applied MRC8 to eliminate unwanted glare and ghosting which easily get’s compounded at long exposures. Our MRC8 is structurally harder than the glass itself, providing a protective scratch-resistant layer, shielding the glass from the elements of frequent fieldwork.

X2 ND (NEUTRAL DENSITY) FILTER: Our X2 ND 6-stop features critically sharp H-K9L optical glass made in Japan. The moment you pick up X2 ND you’ll immediately feel the craftsmanship and quality. We precisely machine each X2 traction frame from environmentally friendly aluminum, and with it’s matte black finish reflections are absorbed rather than reflected into the lens barrel.

NANOTEC: In addition to state-of-the-art MRC8, our optical engineers developed new nano coating layer technology, called nanotec, from the ground up to repel dirt, water and other elements by beading rather than absorbing and smearing. Set in our completely weather-sealed X2 traction frame the X2 ND was built to withstand the harshest of environmental conditions.