Best Yukon Gear Car Axle Shafts in 2026

Dana 60 front outer axle shaft

Spline Count: 30

Compatible Universal Joint Series: 1480

Yukon 1541H alloy rear axle for GM 7.5" passenger with a length of 30-1/2" and 26 splines

2.775" hub

Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost

Provide pivot points for driveshafts

Premium, high-quality aftermarket component

Provides the performance and dependability you expect from ACDelco

9.94" 19 spline 297X GM truck and Blazer, Wagoneer-Disk outer stub

Uses 5-760X u-joint

Precision Machined

Genuine OE replacement

Package Weight: 1.12 kilograms

Package Dimensions: 19.0 H x 13.1 L x 13.6 W (centimetres)

Ideal replacement - this CV axle support bearing matches the fit and function of the original equipment support bearing

Durable materials - this axle support bearing is made of quality material for a long-lasting repair

Convenient service item - this support bearing may be required when replacing the CV joint or axle

Direct replacement - this axle shaft replaces the original equipment on specific vehicle years, makes and models

Complete kit - each shaft includes critical installation hardware and components needed for specific vehicle applications

Durable construction - designed to rigorous standards and tested to ensure performance

Direct replacement - this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

100 percent new manufactured axle

Each SurTrack axle comes with all necessary hardware and grease needed to complete installation

All SurTrack axles are ABS consolidated for use in both ABS and non-ABS applications

This Hard Steel Front Axle CVD Shaft is for Axial Capra Unlimited Trail Buggy

Made of high quality hard steel. Sturdy and durable, easy to install.

Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.

Vehicle Specific

Manufacturer Warranty

Chrysler Quality Assured

DANA 30 JK Non-Rubicon

Overall Lengths: 18.75 L | 34.45 R | 6.25 Stub

Inside Spline: 27/Outside Spline: 32

Designed, Engineered, Tested For GM Vehicles.

Precise Fit For Ease Of Installation.

Product Type:Auto Part

Package Weight: 1.973 kg

package height : 42.2 cm

package length : 11.2 cm

Includes axles, bearings, retainers, spacers, inner/outer seals, and studs

OE Style

Direct Fit

Heat treated for optimal hardness and durability

Rigorously tested for: Static strength, torsional fatigue and rotating and bending torque

Location: Right Hand and Left Hand

Axle Length: 30.5 Axle Spline: 30

Position: Rear Right Lug Pattern: 5 x 5

1541 Manganese

Part Number: 35938

Country Of Origin: United States

Package Dimensions: 3.5" L X 1.31" W X 3.5" H

Direct replacement - this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this clip is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Part Number: 2014616-1

Country Of Origin: United States

Package Dimensions: 13.462 L X 13.462 W X 73.66 H (Centimeters)

Transfers torque from your vehicle's differential assembly to the wheels

Designed, engineered, tested, and warranted for GM vehicles

Precise fit for ease of installation

Shaft Hole Inner Diameter: 5mm; U-joints Diameter:12mm; M4 Grub Screw Pins

The Metal Splined Drive Shaft made of Hardened steel construction,durable.

Universal joint style, Splined engagement, splines are timed to allow driveshafts to be installed in phase

Designed, engineered, tested, and warranted for GM vehicles

Precise fit for ease of installation

For proper installation, locate your nearest GM dealer, independent service center, or body shop

2011 - 04 Ford F-250/350 (Dana 60) RH/LH

Package Dimensions: 11.43 H x 22.86 L x 12.7 W (centimetres)

Package Weight: 8.8 pounds

【Compatibility】The SCX24 front axle shaft fits for SCX24 C10/JLU/Bronco/Gladiator/Deadbolt RC crawler car

【+4mm】The SCX24 axle shaft extend 4mm to the track width on each side of the rc car to add clearance and stability, also it can increase tire selection options

【Long-lasting Performance】The SCX24 CVD shaft provide smooth transmission efficiency to help your crawler car adapt to complex terrain and steer flexibly

Package Dimensions: 3.25" (L) x 30.48" (W) x 4.5" (H)

Product Type: Auto Part

Package Quantity: 1

package height : 14.986 cm

package length : 71.628 cm

package width : 45.465 cm

Compatible with: The RC Front Axle Drive Shaft is replacement for Axial SCX24 AXI90081 AXI00001 AXI00002 1/24 RC cars

Stainless steel material: The RC Front Axle Drive Shaft is made of high quality stainless steel material, strong and durable

Product Size: Length: Approx.31.5mm / 1.2in, color: silver

【Easy to Install】: The RC car front rear axle is in reasonable size and lightweight, so it's easy and convenient to install and disassemble.

【Fit For】: The front rear axle is specially designed to fit for Axial WRAITH RR10 90018 90045 90048 90053 1/10 RC climbing car.

【Premium Material】: The front rear axle adopts high quality aluminium alloy material, which is durable to use for long time, lightweight and anti-corrosion.

【PREMIUM SCX24 Axle Shaft NEW UPGRADES】 High-Quality Stainless Steel will make the CVD more solid and abrasion proof. Larger angle, not easy to fall.

【EXCELLENT Function】 Axial SCX24 Upgrades, Hardened steel construction for precision and durability. It can improve the control performance of the rc car.

【EASY TO INSTALL】 Easy and convenient to install and remove, easy for carrying. Don't need complicated installation steps, easily installation is complete.