Best Atm Car Fuse Holders in 2026

PACKAGE INCLUDE - MuHize fuses assortment box contains 120PCS commonly used blade fuses type and one fuse clamp. Mini 120PCS (APM, ATM): 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A - 12PCS of Each, 10 x In-line mini blade fuse holders (ATM)

GREAT PROTECTION - Terminals are constructed from tin-plated zinc for corrosion resistance and enhanced conductivity. MuHize fuses made of premium materials, fast and precise fusing current to protect your vehicles and electrical devices from a short circuit and overload.

WIDELY USE - MuHize assorted fuses are specifically designed for Cars, Trucks, SUVs, Vehicles, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, Snowmobiles, and most general DC applications etc, covering such components as radio, light, turn signals, etc.

Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise

Easy to use: plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting

Great compatibility: Automotive and non-automotive use for Cars, Trucks, SUVs, ATVs, UTVs, Campers RVs,Motorcycles,Boats,snowmobiles,and most general DC applications etc,covering such components as radio, light,etc. Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box

Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit

Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting

Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box

Package includes -- 10Pcs 15A mini fuse tap and 10 Pcs 15A fuse.

Convenient to use -- just plug this fuse tap into an existing fuse holder. It’s easy for you to add an extra power or connection to the fuse box.

Reliable Material -- This mini fuse tap is made of nylon and 16AWG wire, which is durable and reliable to use, good bending performance, melting resistance and nice electrical conductivity.

PACKAGE INCLUDE - MuHize fuses assortment box contains 120PCS commonly used blade fuses type and one fuse clamp. Mini 120PCS (APM, ATM): 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A - 12PCS of Each.

GREAT PROTECTION - Terminals are constructed from tin-plated zinc for corrosion resistance and enhanced conductivity. MuHize fuses made of premium materials, fast and precise fusing current to protect your vehicles and electrical devices from a short circuit and overload.

WIDELY USE - MuHize assorted fuses are specifically designed for Cars, Trucks, SUVs, Vehicles, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, Snowmobiles, and most general DC applications etc, covering such components as radio, light, turn signals, etc.

15 AMP Fuse x 5

Add-a-circuit Fuse x 5

Heavy Duty 16 Gauge Red Color Wire

[Wire Gauge 】: 14 AWG, added protection to the circuit

[Wire Type 】: Oxygen Free Copper(OFC)

[Waterproof 】 : Yes, 10 Pcs Water Resistant Fuse Holder safe and reliable, used in the circuit of automobiles,electric vehicles.

PACKAGE INCLUDE - MuHize 5 x Add-A-Circuit fuse holder with heavy duty 16 gauge red color wire + 5 x 15 AMP Fuse.

DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit.

EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting.

★【What You Get:】 In this set, we offer 5pcs Add-A-Circuit fuse holder with 5 pair terminals and 120pcs 2A 3A 5A 7.5 A 10A 15A 20A 25A 30A 35A fuse total 130pcs for your use, they are well packed.

★【High Quality:】 We offer quality assurance, all of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.

★【Dual-Slot Fuse Holder:】 These dual-slot fuse holder can provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. They are very convenient and easy to add an extra power or connection to the fuse box without cutting the wire.

DUAL-SLOT FUSE HOLDER: one fuse holder to protect the original circuit, and the second fuse holder with a lead to protect the new circuit. Fits mini (APM/ATM) blade fuses, not fit Standard (APR/ATC/ATO/ATS) or LP-mini (APS)

WIDELY APPLICATION: USED for hard wiring or adding electronic equipment that needs to be wired directly into the fuse box. CZC AUTO mini fuse tap is suitable for radar detector, car alarm, cell phone chargers, GPS, DVD players, dash cam, heated seats, etc.

EASY TO INSTALL & USE: plug into existing, occupied or vacant energized fuse block slot. Add a fuse and add a circuit without cutting or splicing

INSTALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires; Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits; Tap the fuse box to power additional electronic devices with no need to cut or splice; Use this to add a circuit without cutting into your wire harness; Easier to access and to know which circuit you are on than tapping into difficult existing lines

VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice; If replacing a radio, use the existing radio wiring

FITS YOUR VEHICLE: Designed for use with ATM low profile mini blade fuse holders with a wider center than normal mini fuses (metal contacts are on the side of the fuse as opposed to having metal legs); Fits a low-profile mini fuse slot, trade # APS, (fuse slots in the adapter take regular ATM mini-fuses); Not intended for ATC fuses or fuse blocks that have recessed fuses

【Dual-slot fuse holder】Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.

【Versatility】Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.

【Superior quality】Made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.

Allows quick and easy installation of additional 12V accessories without the need for splicing.

ATM Mini Add-A-Circuit Low Profile Fuse Holders

These fit the new smaller, lower profile ATM Mini Fuses are used in newer vehicles and any place where space is limited.

INSTALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires; Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits; Tap the fuse box to power additional electronic devices with no need to cut or splice; Use this to add a circuit without cutting into your wire harness; Easier to access and to know which circuit you are on than tapping into difficult existing lines

VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice; If replacing a radio, use the existing radio wiring

FITS YOUR VEHICLE: Designed for use with ATM low profile mini blade fuse holders with a wider center than normal mini fuses (metal contacts are on the side of the fuse as opposed to having metal legs); Fits a low-profile mini fuse slot, trade # APS, (fuse slots in the adapter take regular ATM mini-fuses); Not intended for ATC fuses or fuse blocks that have recessed fuses

Protects Original Circuit and Provides A Lead For New Circuit.

High Quality Copper wire 16AWG make sure excellent electrical conductivity.

Compatible with mini blade fuses, ideal for car alarm, dash cam, GPS, Cell phone charger, other electronic devices.

Use with MINI ATM fuses up to 20 AMP each slot!

SET Includes, Fuse TAP + 5 FUSES! 5A, 7.5A, 10A, 15A, 20A

Plugs into occupied or vacant energized fuse block slot.

INSTALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires; Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits; Tap the fuse box to power additional electronic devices with no need to cut or splice; Use this to add a circuit without cutting into your wire harness; Easier to access and to know which circuit you are on than tapping into difficult existing lines

VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice; If replacing a radio, use the existing radio wiring

FITS YOUR VEHICLE: Designed for use with ATM low profile mini blade fuse holders with a wider center than normal mini fuses (metal contacts are on the side of the fuse as opposed to having metal legs); Fits a low-profile mini fuse slot, trade # APS, (fuse slots in the adapter take regular ATM mini-fuses); Not intended for ATC fuses or fuse blocks that have recessed fuses

Brand new and Specialized Repair Car Standard ATO Standard Blade Type Fuse Holder Connector 30A, Heavy Duty Wire Extension for for Hard-To-Reach Vehicle Fuse Box Panel

2 Pcs car fuse connector fits for ATM/APM Standard Fuses, The 11 in Standard fuse holder can be used in a small space where it is inconvenient to directly install the fuse, and the fuse can be transferred from the small space to the outside

The design of the Standard pointed tip allows you to easily insert the fuse connector into the fuse box, and quickly and easily check the wiring problems, prevent the circuit overload from burning out the car components

Package including: 10 pieces 16 AWG inline fuse holder with cover. Water proofing IP65. Fit Boat Car Marine Electric Automotive Plug-in mini fuse.

Wire Type: 300mm of 16 AWG Wire. UL1015 16 Gauge, Tinned copper conductors, not CCA

Support for ATM/APM type fuse: 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A.

Low profile ATM Style Add-A-Circuit Fuse Holder, plug into an existing fuse holder,16AWG new wire lead for new circuit adding additional fuse 5A/10A/15AMP

Protects Original Circuit and Provides A Lead For New Circuit

This product allows you to get a professional installing of any accessory up to 15AMP without cutting or splicing into the original current wiring. It makes your work easy and fast to add additional circuits for electrical Accessory such as car phones, CD Players, GPS Etc.

Heavy duty in-line fuse holder, ideal for mini blade fuse, for car boat truck auto use, added protection to the circuit.

Mini size in-line fuse holder, ideal for ATM blade fuse, come with cover, protects it from dirt and muddy water.

14 AWG wire, easy to automotive installation, cars, boats, motorbikes and trucks.

【UL Wire】Heavy Duty 14 (AWG) Gauge UL Wire Support up to 30A Load for 32V 12V DC.

【How to Use】 Cut off the Wireand add Additional Circuits with Fuse to Protect your Electrical Equipment.

【Product Detail】5 pcs In-Line fuse holder for ATM/APM type fuses,2A 3A 5A 7.5A 10A 15A 20A 30A

Package including: 3 pack 20 AWG Mini type inline fuse holder with cap, water proofing IP65. For Car Boat Marine Electric Automotive Plug-in blade fuse

Wire Type: 20 AWG Wire. UL1015 20 Gauge, tinned copper conductors, not CCA

Support for ATM(mini) type fuse: 1A 2A, 3A, 4A, 5A, 7.5A, 10A, 15A. DC 12V 24V

Protects Original Circuit and Provides A Lead For New Circuit

High Quality Copper wire make sure excellent electrical conductivity.

Compatible with mini blade fuses, ideal for car alarm, dash cam, GPS, Cell phone charger, other electronic devices.

Package including: 2 pack 8 AWG waterproof IP67 inline fuse holder with cover, waterproofing IP67, For Automotive Boat Car Marine SUV Bus Truck Electric Blade Plug-in Fuse

To fit MAXI fuse 20A, 25A, 30A,35A,40A,50A,60A,70A,80A and DC Voltage 12V 32V 58V. It isn't for standard fuse, mini fuse, ATO fuse, ATM fuse.

Wire Type: 8 AWG Wire. UL1015 standard. The conductors are Tinned copper strands(TC), not CCA.

Each Comes with fuse jumper to set up for ground, and 2 14-16 spade connectors.

Ideal for marine use. Small footprint - 2" x 3/4" (mount additional 3/4" per side).

Acts as an in-line fuse holder with jumpers to create any distribution block.

🚕 High Security: One fuse holder to protect existing circuit and a second fuse holder to protect a new circuit, it is designed with dual slot fuse holder.

🚕 Easy to Use: Insert into fuse box to get additional fused circuit, insert into occupied or empty energized frit slots. Easily install other circuits without splicing or cutting.

🚕 Superior Quality: Made of high quality material pure copper wire, good bending property, high temperature resistance and excellent electrical conductivity, corrosion resistance, very durable.

In-line ATM blade fuse holder with cover

Capable of handling a maximum of 32 Volts and 20 Amps

Two 4 inch, 16 gauge leads

✅[1 to 2 Slot Fuse Holder]: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.

✅[Widely Used]: It is widely used to add LED light bars, radar detectors, driving recorders or any other electronic equipment that needs to be directly connected to the fuse box.

✅[Quick Connect Terminal]: Blue flexible socket tail, very easy to connect to any naked wires by only use a vise, no welding required.