Best Snap On Car Phone Holders in 2026

Magnetic Phone Mounting Technology For Your Car Dash, No Attached Magnets – Dock Your Phone To Your Dashboard In A Snap With The Low Profile Steelie Orbiter Magnetic Mounting Technology; There Are No Magnets Attached Directly To Your Phone

Universal Secure Attachment To Phone, Case + Car- Metal Plate Easily Attaches To Most Rigid Phone Cases Using 3M Adhesive; Attaches To Almost Any Dash- The Orbiter Magnetic Socket Lives On The Dash Mount Allowing Quick And Secure Connection To Your Phone

Adjustable Viewing Angles - The Dash Mount Features A Steel Ball That Articulates With The Steelie Orbiter Magnetic Socket Allowing You To Tilt Your Phone Smoothly From Landscape To Portrait And Everywhere In Between

Upgraded Vent Clip: The Car phone mount features a stronger, thinner vent clip and an innovative support ring for extra support, which could hold your phone securely on an air vent in your car. NOTE: THIS CAR MOUNT FOR PHONE is ONLY MATCHED WITH HORIZONTAL BLADE AIR VENTS

Adjustable Attachment: The phone holder car features an adjustable support ring, it can be rotated to any angle without blocking the vents. The Adjustable Bottom Foot can fit all phones

Innovative Hollow Silicone Rubber: The car mount for iPhone is armed with an innovative hollow silicone rubber, which is more stable when compared with other common silicone rubbers. When you put your phone on the car phone mount, your phone can fully fit the hollow silicone rubber cushion so that it won't drop at all

EASY ONE TOUCH MECHANISM: Press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.

WIDE COMPATIBILITY: New larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.

MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located near the bottom foot

Phone Holder Adhesive Patch Backing: Red multi-use 8 PACK Smaller 2 sides VHB 3m replace sticky adhesive glue part works for hands free car dash holder, finger holder, phone ring holder, plastic mount, dashcam, ball mount, grip holder back & magnetic cell phone car mount base for applications. Tiny long-lasting adhesive replacement kit re-stick magnets wall mount & magnetic mount. With multiple adhesive strips cell phone holder, you position the android on a flat surface in the dashboard or van.

Super Strong Circular 3M Sticky Adhesive Dots: Extra strong 2 PACK both sides larger adhesive replacement foam thin sheet work perfectly for collapsible grip & switchable tops socket. Withstand heat resistant on hot climate car mount replacement stickies parts, no need to buy re-stickable gps grip mount or dash cam. Heat resistant vhb 3M double sided adhesive sticky pads art for custom swappable expanding stand. Use heat tolerance adhesive pads sticky notes to reattach it.

Replaceable Alcohol Pads Extra: Clean the chosen area to place your smartphone. Make sure the mounting surface and base of mount adhesive mat tags clear cleaned completely before attaching to affix and secure a new blanks 3M adhesive stickers backers for carmount or shower caddy or USB splitter even motorcycle helmet. For the ultra thin 2 sided 3M adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.

Broad Compatibility: This Phone Car Holder, with its rubber coated grips for Enhanced Stability and Protection, thanks to specialized grips that expand up to 4" wide, this car phone mount is compatible with iPhone 13 12 11 XS Max XR X 8 Plus 7 6S 6 5S SE, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5, A9 A8+ A8 A7 Pro C8 C7 C5, Note 9 8 6 5,Google Pixel 3 3XL,Nexus 5 5X 6P, LG V35 V30 V20,Oneplus 6T 6,etc. even with case on device.

Industrial-strength suction cup windshield/dashboard phone holder: Paired with APPS2Car's industry leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield. It attaches firmly to the vehicle windshield and stays mounted in hot or cold. This product includes an extra 3M sticky dashboard pad for a stronger hold in the case of dash placement.

Full Range of Motion: The cradle holder rotates 360°, enabling you to view your device in portrait or landscape orientation. The car phone mount holder has a pivoting and telescopic arm that helps you position your phone in the optimum position. You can pivot the arm up to a 240° arc, and extend the arm from 4.6" to 6.3".

POWERFUL MAGNET: Built-in 6 powerful N45 magnets(12*4mm), just place your device onto the magnetic phone car mount and it instantly locks securely in place, regardless of road vibrations or impacts. Safely secure the cell phone to provide a safe driving environment.

EASY INSTALLATION: Simple Snap On and Go & Conveniently Mounting: Cradle-less design uses powerful magnets securely lock your device in place, just snap the device on then to go, Simple snap your device off the magnet car phone holder to leave. Good Thanksgiving Christmas present for drivers, traveler.

360° SWIVEL SYSTEM: With a 360° swivel ball joint design and angle adjustment, you can manually tighten the magnetic phone window mount head to position the phone facing you directly, with the screw nut around the 360-degree ball head joint.

Flex Neck Phone Holder - Safely and quickly secure any mobile device in your car to a dashboard, windshield or any firm & flat surface. With a StickGrip suction cup base, this phone car mount will stick to any surface and not fall off while driving.

Magnetic Phone Holder - Comes with a powerful Rare-Earth neodymium phone magnet that provides a secure grip to your iPhone, Android or Tablet. 100% mobile device safe. Simply stick the car mount magnet to the back of your phone case for a secure magnet hold.

Optimal Viewing - 360-degree adjustable rotating neck, this magnetic car mount allows viewing from any angle. The car magnetic phone mount connection allows you to rotate seamlessly between portrait and landscape orientation in a snap.

👍4 in 1 fits Magsafe Magnetic Cell Phone Holder for Car: Are you not sure which installation method is better for your car? No worries! 2 bases of the adhesive/vents mounting base magnet car holder, can be flexible placement. Horizontal & Vertical Vents & Dashboard & Desk, all places work perfectly. Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences. Suitable for all cars like sedan, pickup trucks, suv, taxis and more

👍Exclusive Technology Strong Permanent Magnetic 1:1 fit for MagSafe: Latest research and development of LISEN laboratory in 2023 exclusive patent, perfectly aligned fits iPhone holder for car. Compared with other cheap single-lap magnetic car phone holder for iPhone 12 13 14 Magsafe mount. This has stronger magnetic suction and doesn't affect the phone signal, doesn't damage the phone battery

👍Directly with iPhone 14/13/12/mini/pro max Car Accessories, for magsafe case without additional magnet metal plate. Just get close and automatically snap to the magnetic vent car mount for iPhone fits magsafe, enjoy Hands-free keeping your phone firmly! Work for All Android Phones: We provide extra 2 metal rings, fits case and other phones without magsafe

【Premium Quality】 - The car phone mount windshield features a top-quality aluminum design for its 13 inches long arm, providing you perfect viewing angle and achieving maximum flexibility while driving vehicle. 360 swivel mount head with screw-nut lock ensures secure positioning and optimal viewing, mount rotates 360° for landscape and portrait viewing. Change your perspective with a simple spin.

【Strong Suction】 - The phone mount for car has strong suction with switch, well adhere to windshield/dashboard/desk/nightstand/cabinet. And extra-dashboard support base offers more stability and security, preventing phone from falling off while driving. Long arm for better extension with sturdy suction cup base: industrial-strength suction cup, securely lock your mount/device on the window/windshield/dashboard even on the bumpiest roads.

【High Flexibilty】 - One quick release button means you can single hand the operation with your phone. Fully adjustable with 360 degree rotation for viewing your device at the right position. Flexible grip can be bent freely as required. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. This is a multi-purpose gooseneck cell phone car holder, which will be safely installed on the flat surface, such as windows, dashboard, table, bedside table, cabinet, etc.

Flexible: You can adjust your comfortable viewing angles due to 360 degrees of rotating ball joint.You can adjust your comfortable distance between you and the holder due to telescopic arm.

Quick Release/Lock:Just press the release button on the left, clamp arms will smoothly slide to release your phone.Just press the lock bar,your phone will hold on stably.

Hold Your Phone Stably And Gently:This car phone mount has anti-slip rubber pads, stable support shelf, firm & scratch-free claw offer secure grip for your phone to ensure safer driving.This cell phone car mount is fit for almost all phones.

3 IN 1 Car Phone Mount: Cell phone holder car is equipped with a suction cup and vent clip, which can be freely mounted on the windshield, dashboard, and air vent for feeding your different usage needs. Cell phone holder is applied to most cars, pickup trucks, SUVs, taxis. A perfect assistant for Uber, Lyft drivers.

Enhanced Suction Cup: Phone holder mount is equipped with double-lock suction cup and uses heat-resistant TPU material , which can provide strong suction power on smooth surfaces, and keep the mount stable in any conditions. To restore adhesion, simply rinse the sticky surface with warm water and wipe dry.

Perfect Flexibility: Car phone holder with 360 degree ball joint and adjustable telescopic arm, which can adjust your phone to any ideal angle without obstructing your view. The telescopic arm can be extended from 6.5 inches to 8.1 inches. Easily adjust the distance between you and the car mount.

3 in 1: EYEMAY car phone holder with suction cup and vent clip not only can be installed on dashboard but also on vent. Windshield, dashboard and vent, three places for choice.

High Temperature Friendly: EYAMAY suction cup have three-layer nano-gel suction cups can resist up 194 °F(90 ° c)! Heatwave in California also works perfectly. Good partner in summer.

Adjuestable Long Arm: EYEMAY phone mount for car has a 360° rotation ball-joint and telescopic arm, you can adjust best anlgle as you wish. Provide you with safer driving whether you are navigating, or charging. Applicable to all cars, SUVs, trucks, and taxis, Ubers.

Upgraded Car Phone Mount: Car Phone Holder is equipped with a strong sticky rotating suction cup, which can be freely mounted on the dashboard and windshield. Suitable for most cars, pickup trucks, SUVs, trucks and taxis. A good helper for Uber and Lyft drivers.

Adhesive Suction Cup: Car Phone Holder Mount with upgraded super sticky suction and double lock design, which doesn't come off even on bumpy roads. An additional 3M dashboard pad provides a smooth surface, and the car phone mount can be securely mounted anywhere you want. NOTE: Not recommended to use the dashboard pad for windshield mounting.

Flexible Adjustment: Car phone mount with a telescopic arm extends from 3.7 inches to 5.9 inches and can be adjusted to any angle. The phone holder features a highly flexible ball joint 360 rotation for unlimited viewing angles. Enjoy a more relaxed and safer driving experience.

👍ExpertHolder for Air Vent, Never Slip & Fall: Car phone holder mount is designed as “hook shape”, though rotate the knob to attach & hook the louver tightly, built-in metal and ensure it won't break the air vent and hook, even bumpy road. LISEN cell phone holder car is BORN FOR STURDY & PRACTICABILITY, It solves the problem that common clips on the market are easy to Slip & Droop over time. PLEASE NOTE THAT THE LENGTH OF THE CLIP IS ADJUSTABLE BY TURNING THE "WHEEL" KNOB.

👍Perfectly Compatible with Most Air Vents: The Metal hook clip of cell phone mount for car is 50% longer than the ordinary one. It can be compatible with 99% Horizontal & Vertical vents, which solves the common other holder problems of poor compatibility and is easy to fall on the market. we upgrade the iPhone car holder to meet all the needs of the car vent. Note: Round vents are incompatible, like Mercedes-Benz, Wrangler, Truck, Honda Civic, etc.

👍Strong Clamp Arm, Rock Solid Grip : Cell phone car holder that has a most strong clamping force of up to 48 LB (equivalent to 70 iPhone 13 pro max). The gorgeous design of the thickest threaded anti-skid pads, precision gears and springs ensures your device won't slip out while driving, protects your expensive phone in all directions safe. Note: The maximum thickness of the device is 18 mm (0.7 inches), some ring buckles and popsockets will interfere with use.

【Specially Designed for iPhone 14 / 13 / 12 Series Phones】 It is compatible with iPhone 14 series / 13 series / iPhone 12 series phones without case or with official MagSafe case or other third party MagSafe-compatible case with built-in magnet metal, no extra metal ring required. If your iPhone 14 / 13 / 12 series phone is with a regular Non-MagSafe case, you have to use the 3M adhesive hollow metal ring provided.

【Also Works Well with other Cell Phones】 It can also be applied to other cell phones without case or with regular case, of course, you have to use the hollow adhesive metal ring provided.

【Super Strong Magnetic Attachment】 With 14 powerful rare-earth magnets inside, this mount easily and securely holds your phone, no worrying of dropping your phone, even through bumps, sharp turns or sudden stops when mounted on the car dash.

🗽[Easy installation in few seconds] Be sure to clean the contact surface before installation, make sure the location is at eye level, and make the bottom of base is completely covered on the dashboard. JOYROOM magnetic phone holder is made from the most advanced durable sturdy aviation-grade materials, making magnetic phone holder more resistant to abrasion and corrosion. After take few seconds to install it well, improve your driving experience.

🗽[Holder Your Phone Firmly] Ultra N52 Magnetic *6，JOYROOM magnetic phone holder with 6 built-in strong magnets, this magnetic phone holder could hold your phone firmly even on the bumpiest road or sharper turn. You only need to take the phone close to the magnetic phone holder, and the phone will be swiftly attracted and sticks correctly to the mount in a snap-like click. Even if you are driving intently, you can easily put your phone on it.

🗽[Strong Non-marking Adhesive Sticker] The adhesive force of the adhesive can withstand up to 77.16 pounds of pulling force. Withstands temperature changes from -40 to 194 degrees Fahrenheit and still maintains over 90% structural strength.JOYROOM magnetic phone holder sticks tightly to your dashboard, summer or winter, and will not come off.

2 DIFFERENT SIZES CLAMPS -- Perfect support any device between 3.5-6 inch and 7-8 inch (diagonal). Compatible with iPhone 14 13 12 11 Pro X XS 8 7 7s 6 6s Plus 5S 5C 5 SE, Samsung Galaxy S9 S8 S7 Edge S6 S5 Note 5 4, Google Nexus 6 5, LG G5, Nokia, Moto, HTC and more

MORE SECURE AND STABLE -- Up to 13 inches of gooseneck, make the device closer to your sight. Extra dashboard support base offers more stability and security, providing stability even on bumpy roads

FLEXIBLE VIEWING ANGLES -- Full 360 degree rotation ball joint design for you to find the optimal viewing angles

CAR PHONE HOLDER MOUNT: This car phone PowerMount is the perfect way to mount your phone by using the vehicle's power port. Safely secure the mount by plugging the 12V charger into a vehicle's power port. The flexible mount arm adjusts for the perfect view of your phone while charging.

FAST CHARGING: Our PowerMount can Charge any USB device up with the 7.5-watt illuminating USB port on the 12V car charger. Simply plug into your 12V charge port and adjust for the perfect view while your device powers up.

360-DEGREE VIEW: The 360-Degree design allows you to rotate seamlessly between portrait and landscape orientation in a snap. The 360-Degree, rotating design and flexible neck provides optimal viewing from almost any angle whether you're on the road or at home.

𝗠𝗼𝘀𝘁 𝗩𝗲𝗿𝘀𝗮𝘁𝗶𝗹𝗲 𝟯 𝗶𝗻 𝟭 𝗠𝗼𝘂𝗻𝘁𝗶𝗻𝗴: VICSEED phone mount for car can be versatilely mounted to your dashboard, windshield or air vent to meet your different demands. Perfect Christmas gift for all people who owns car, trucks, SUV, taxis or even boat, also an excellent assistant for Uber, Lyft drivers!

𝗦𝗲𝗰𝘂𝗿𝗲 𝗦𝘂𝗰𝘁𝗶𝗼𝗻 𝗖𝘂𝗽 𝗔𝘁𝘁𝗮𝗰𝗵𝗶𝗻𝗴: Featured with the sticky 3M Nano gel, the suction cup of VICSEED car phone holder mount bears weight up to 66lbs even on extreme temperatures of -22℉(-30℃)~194℉(95℃)! And thanks to the 3M adhesive pad, VICSEED mobile phone holder car easily sticks securely on most flat dashboard, even on your textured dashboard! Leaves no residues on your beloved dash!

𝗪𝗶𝗱𝗲𝗹𝘆 𝗣𝗵𝗼𝗻𝗲𝘀 & 𝗖𝗮𝘀𝗲𝘀 𝗙𝗶𝘁𝘁𝗶𝗻𝗴: 4.5" width wider clamp plate and 0.8" length adjustable foot tray of VICSEED cell phone holder car accommodates larger and thicker phones. Fits easily for all mobile phones between 4''-7'' and most thick cases within 0.7" thickness.(only except for ring holder case and pop case).

Designed for iPhone 14/13/12 Series - Thanks to strong magnetic alignments and attachments, the fit for MagSafe car mount can hold your bare Phone 14/13/12 Pro Max Mini directly; The magnetic phone car mount can also be compatible with Original Official MagSafe cases, no need to apply the additional metal rings

Work With All Phones - Comes with two extra metal rings, the magnetic phone holder for car works with all phones and most cases; Just stick the metal ring on the phone or the outside of the case, and the magnets automatically align and attach to your smartphone, without impacting your phone signals, connections, etc

Strong Magnetic Power - Build in 12 powerful permanent magnets in precise alignments, the magnetic car phone holder mount offers a wider grip force and increased mounting stability, holding your cellphone 14/13/12 magnetically in place while driving

Safe Car Phone Holder Mount: Curved base design specially for car dashboards. Easy to see the cellphone view straightly. No need to turn your neck hard to see the GPS or phone interface. Won't blocking the sight, Make driving safer, reduce the burden on eyes and neck. NOTED: Dashboard Thickness should within 2 inches. Kindly check your dashboard thickness before ordering.

Stable Car Phone Mount: Added excellent non-slip rubber in the curved base, Upgrading 50X strongest gripping make it firmly mount on the dashboard. Strength telescopic clamp can hold the phone firmly, prevent your smartphone from falling and wearing. Ensure zero waggle even in a bumpy road.

360° Rotation Cell Phone Holder: The car phone holder pad supports 360 Degree rotation, Switch between horizontal and vertical screens at your will. The vertical arms can be pivoted up and down 180 degree, which allows a optimal viewing. Gives you an easy and safe driving journey.

✅【2-PACK STRONG MAGNETIC MOUNT】: This powerful magnetic phone holder can create a powerful attraction that firmly supports your device while allowing you to drive without distraction.

✅【Super easy to use】: Install in 1 second. Magnetically guided adsorption is the most ideal solution for car phone holders. You only need to take the phone close to the phone holder mount, without any complicated steps, the phone will be swiftly attracted and sticks correctly to the mount in a snap-like click. Even if you are driving intently, you can easily put your phone on it.

✅【SAFE DRIVING VIEW】: Mini-size, not taking up space, it is placed in the dashboard without blocking the view at all, and does not need to look down at the device to ensure your safe driving.

VERSATILE AND SECURE: Safely and quickly secure a mobile device or MagSafe to almost any vehicle's cup holder with the mount’s adjustable base. Cradle-free design eliminates the need to tighten. Just hover your device near the magnetic surface and instantly lock it securely into place.

STRONGEST MAGNETS: Extra powerful Rare-Earth neodymium magnets are 30% stronger magnets than our standard MagicMounts and are 100% mobile device safe. Hold your phone or device securely in place even on the bumpiest roads and are still 100% safe for all modern Smartphones.

COMPATIBLE WITH MagSafe: Our specially designed mount head allows you to safely secure an iPhone 12, 13 or later device with a MagSafe without having to use a MagicPlate. The mount's adjustable base will fit into most vehicle cup holders by adjusting it (with a simple twist).

[Safest Head-Up Display] andobil R&D team specially designed the clip phone holder for car dashboards. The andobil dashboard clip phone mount as a head-up display won't block the sight, make driving safer. No need to turn your neck hard to see the GPS or phone interface, reduce the burden on eyes and neck.

[Military Grade Design, Never Slip] Made with soft non-slip silicone pads, high strength thickened pure steel springs and curved base that fits the dashboard. The Ultra Stable Car Phone Clip Holder attaches to the dashboard or console ledge and securely holds your devices to prevent them from scratching and falling. Ensure zero waggle even on a bumpy road.

[Exclusive 3M Velcro Double Locking Design] The Doble Locking Design with 3M exclusive patented Velcro design and high spring tension of military-grade pure steel spring. This andobil cell phone holder provides upgrading 50X strongest gripping make it firmly mount on the dashboard ledge. Attention to detail: All pressure parts are designed with soft silicone pads to prevent damage to your car and phone.

Innovative and easy Installation on any CD slot

Cradle-less, hassle free quick and easy snap-in One hand mounting system

Full 360 degree rotatable, can be mounted with or w/o protective case on it

MUST HAVE ROADSIDE COMPANION: Do not allow your phone to become a distraction. Our car vent phone holder is easy to use and will provide you with a great hands-free viewing experience. Perfect for GPS or media apps and hands free calling.

SECURE AND SAFE HOLD: Our car vent phone mount will securely hold your phone even in the roughest terrain. It features a twist lock design allowing for an extra secure hold on the air vent. The mount clips work best on horizontal vents and not for vertical/round vents.

UNIVERSAL PHONE COMPATIBILITY: Whether you have an iPhone or Android, our air vent phone mount will work perfectly. It has the ability to accommodate devices up to 4.1in wide with or without a case, so virtually any phone will fit.

【𝐂𝐨𝐧𝐯𝐞𝐧𝐢𝐞𝐧𝐜𝐞 - 𝟎.𝟏𝐬 𝐀𝐮𝐭𝐨-𝐀𝐥𝐢𝐠𝐧 𝐢𝐏𝐡𝐨𝐧𝐞】The Magsafe Car Mount is specially designed for iPhone 14/13/12 Pro Max Mini & official MagSafe Cases to free of sticking Metal Rings. 0.1s for precise attachment, Snap and Go! Totally free your hands and save time.

【𝐒𝐚𝐟𝐞𝐭𝐲-𝐍𝐞𝐯𝐞𝐫 𝐃𝐫𝐨𝐩】Summer is here and the Sticky King is not afraid! TORRAS Magnetic Phone Holder adopts 2023 German Nano Adhesive Pad, which is super sticky and long-lasting. Even in extreme temps from -40°F to 194°F, this iPhone Car Mount will not deform or fall off.

【𝐌𝐢𝐧𝐢 𝐁𝐨𝐝𝐲, 𝐁𝐢𝐠 𝐏𝐨𝐰𝐞𝐫】 The TORRAS Phone Mount for Car is built with 20 professional RUBIDIUM MAGNETS, which provide a strongest magnetic attraction that can steadily attach to any phones.The Cell Phone Holder Car helps you solve the problem of dropping the phone once and for all! Even on bumpy roads, your phone is still securely attached. Driving at will, it's always with you!

Broad Compatibility: This Aluminum alloy Phone Car Holder, with its rubber coated grips for Enhanced Stability and Protection, Aluminum alloy mobile phone holder，thanks to specialized grips that expand up to 4" wide, this car phone mount is compatible with iPhone 13 12 11 XS Max XR X 8 Plus 7 6S 6 5S SE, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5, A9 A8+ A8 A7 Pro C8 C7 C5, Note 9 8 6 5,Google Pixel 3 3XL,Nexus 5 5X 6P, LG V35 V30 V20,Oneplus 6T 6,etc. even with case on device.

Industrial-strength suction cup windshield/dashboard phone holder: Paired with RUIGPRO's industry leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield. It attaches firmly to the vehicle windshield and stays mounted in hot or cold

Full Range of Motion: The cradle holder rotates 360°, enabling you to view your device in portrait or landscape orientation. The car phone mount holder has a pivoting and telescopic arm that helps you position your phone in the optimum position.

Product 1: COMPATIBLE WITH STEELIE PHONE MOUNTING SYSTEMS FOR HANDS-FREE VIEWING - With the Magnetic Phone Socket adhered, your device can magnetically attach to Steelie Mounts like the Dash Mount, Windshield Mount, Vent Mount, Tabletop Stand, or HobKnob Handle (sold separately)

Product 1: FOR NEW OR ADDITIONAL DEVICES TO YOUR STEELIE MOUNTING SYSTEM - No need to buy a whole new Steelie Kit when you upgrade your Apple iPhone, Samsung Galaxy, Google Pixel, or other phone. Or, if you have multiple phones you would like to use with your Steelie Mount, simply purchase this additional Magnetic Phone Socket

Product 1: POWERFUL, HIGH-STRENGTH MAGNET - The neodymium magnet and silicone center create a strong grip and smooth glide when paired with Steelie Mounts or other metal surfaces like your refrigerator or toolbox

👍【Free your hands】-when you on a long-distance journey at the back set and felling bored. with this with this headrest mount,no need holding the phone any more, like eat snacks while watching movies, provide a pleasent watching condition for your children.

👍【Just a snap to mount or take】after mount installed, you can just a snap to mount or take your phone from the magnetic when you have a call, really convenient.

👍【Strong Magnetism】With the built-in high performance N52 magnets, you can align your phone so tightly on the headrest mount, no worry about falling off even when drive on a bumpy road.( with Magnetic case will be the best choice)