Best Car Seat Brackets in 2025

The World's Number One Car Fire Extinguisher Bracket! - Adjustable-width design that either clamps onto the seat rails or bolts onto seat mount points

Compatible with the cradles supplied with H3R HG250, Amerex B417T or B385TS, Kidde 408-466727, FA110 or FA5G, or any 2 - 2.5lbs extinguishers with a supplied cradle with hole spacing of 4-¼”, 4-⅝” or 5” (108mm, 117mm or 127mm) center to center.

Easy installation in around 15 minutes without drilling holes that places extinguisher out of the way, but within easy reach

Side Mount L Bracket for Bucket Race Seats

Compatible with most FRP and carbon fiber bucket race seat from InVictus / NRG / RECARO / SPARCO / MOMO / OMP bucket race seats

These brackets are made from high strength steel.

Built To Long Last: The ISOFIX mount bracket was made of high quality steel, which is sturdy and durable enough.

Easy To Install: The installation is simple, you could finish in a few minutes.Please refer to the picture for detailed installation.

Fitment: 1.Fit for cars without ISOFIX interface; 2.The rear backrest of the car can be put down; There is a gap between the rear backrest and the cushion of the car, and is not closed.

Fitment: Compatible with most aftermarket seats with side mounts or bottom mounts or base bracket. If your seat is not mount a base bracket, these sliders will not apply to your car floor.

Feature: Color is black. Surface finish is electrophoresis. The handle comes in a rounded style that you can pull out or bend to adjust to the width of your seat.

Heavy Duty: Made of high quality steel material, which is durability and impact-resistance, ensuring a long-lasting usage.

Comes with Pair of Seat Brackets; Fits with all 4-Point, 5-Point, or 6-Point Aftermarket Seat Belt

Low Mount Design; Made of High Quality Light-weight Tensile Mild Steel for Extreme Strength

Pre-Drilled hole Blanks and Can be Drilled to Fit; No Slider Required

High quality, 100% refund if there is any quality problems. Please kindly noted, this bracket is universal for most cars, not SUV or MPVs, you can buy another bracket in our store for your SUV and MPVs.

Package includes: 1 * ISOFIX Bracket，2 * ISOFIX Guide Slot

Please contact seller to get installation vedios and instructions. Please check installation vehicle requirements carefully before ordering.

High quality, 100% refund if there is any quality problems

Package includes: 1 * ISOFIX Bracket，2 * ISOFIX Guide Slot

Please contact seller to get installation vedios and instructions.

Made from premium-quality steel, so it is not only tough but also stable.

The installation is simple and firm.

This Seat Mount Bracket is sturdy, durable and has a long service life.

Comes with Pair of Seat Brackets For Left & Right Side; Fits With all 4-point, 5-point, or 6-point After Market Seat Belts

Made of High Quality Materials for Long-Lasting Durability; Direct Fit Most After Market Racing Seat

Blanks and is Available to be Drilled to Fit; No Slider Required; Do Not Need Any of Cutting or Welding Vehicles

High quality, CE certification. 100% refund if there is any quality problems

Package includes: 1 * ISOFIX Bracket，2 * ISOFIX Guide Slot, 2 * Screw Bolts;

Please contact seller to get installation vedios and instructions.

Fits most slider or rail such as Bride, Sparco, Recaro seats sliders and/or bases.

The brackets are Made of high-quality Metal

With this type of side mount, you are also able to adjust your seat lower, which give you better control of the car.

This rear seat hardware kit Compatible with1976-1986 CJ and 1987-1995 Jeep Wrangler.

High Stenght - The sturdy structure ensures absolute quality and high durability of the seat bracket. High quality steel, not easy to bend and crack. Black powder coating treatment on the surface, not easy to rust.

Easy To Install: The installation is simple, you could finish in a few minutes.Please refer to the picture for detailed installation.

Side mounts for one seat.

Made from high quality iron.

Fits most slider or rail such as Bride, Sparco, Recaro seats sliders and/or bases.

【Long-Lasting & Durable】 High-quality metal material makes its service life long and durable, and the child safety seat belt bracket Latch meets standard specifications and strictly follows factory quality control

【Easy Use:】The installation is simple and firm, no any modification and drill.

【Universal Mounting Base:】Professional production, stable performance, enhance the safety of children riding.Supports all for ISOFIX child safety seats.

Side mounts for one seat.

Made from high strength steel.

Fits most slider or rail such as Bride, Sparco, Recaro seats sliders and/or bases.

Made with 1/8-inch thick black powder-coated steel, more durable than aluminum and meets FIA requirements

These 90-degree L-shape precision CNC cut side brackets will allow you to easily mount/fix the bucket/racing seat of your choice in your car (for one seat))

Compatible with most side mount seats offered by OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride and will most likely fit most other seat manufacturers that have not been tested

Made from premium-quality steel, so it is not only tough but also stable.

The installation is simple and firm.

Professional production, stable performance, enhance the safety of car seat

🚗【 Fitment】Universal mounting base,compatible with all for ISOFIX child safety seats.

🚗【High Quality】The ISOFIX mount bracket was made of high quality steel, which is sturdy and durable enough,anti-rust and waterproof.

🚗【Installation vehicle requirements】1.Fit for cars without ISOFIX interface; 2.The rear backrest of the car can be put down; There is a gap between the rear backrest and the cushion of the car, and is not closed.

Made from 3/16 inch steel making the welds stronger and more durable

Will not bend or warp with heat whereas other brackets can be bent by hand

Extra material for direct mounting when the driver wishes to eliminate sliders altogether

design for racing

Compatibility----- The part number of the alternator bracket is PCE232.1002, which can be used in serpentine/V-belt applications and is suitable for Chevrolet SBC 350. Before ordering, please carefully check whether it is compatible .

Combined use ----- Chrome Alternator Bracket Kit is a complete set of generator brackets, installed on the passenger side, used to install small generator sets on the vehicle. Note: It is installed on the passenger side of the upper deck and requires a 90 degree water supply.

Aluminum material ----- The alternator bracket is made of high-quality aluminum material, which is scratch-resistant and wear-resistant, sturdy, high-strength, high-hardness, best durability, and long service life.The stand is lighter and stronger.

Fitment: Compatible with 2000-2014 Tahoe or GMC Yukon style split 3rd-row seats.

Feature: 100% Brand new and high quality. Color is black. Designed specifically so you can install these style seats in virtually anything, where factory brackets simply will not work.Install a 3rd row seating will make more capacity for your car.

Heavy Duty: The steel construction and powder-coat finish make this product durable and long-lasting for a product that you can count on.

Side Mount Racing Bucket Seat Brackets

Universal fit for sliders and Side Mount Racing Seats

Design is the same style as the Sparco side mount brackets

Application:Compatible with Ford Focus 2005-2010 MK2 IsoFix

Reference OE OEM Number: 1357238

Material:The bracket is made of high quality metal,sturdy and durable, no rust.

Side Mount Racing Bucket Seat Brackets

Universal fit for sliders and Side Mount Racing Seats

Design is the same style as the Sparco side mount brackets

【This Item Includes】1 X Pair of Universal Side Mount Seat Bracket Adapters

【Specifications】11-1/4" to 12" Side Mount Bolt Spacing; 12-1/2" Bottom Mount Max Bolt Spacing with 3/4" Intervals; 2-1/2" to 4" Seat Height with 3/4" Intervals

【High-Quality】Mild Steel Construction with Black Powdercoat Finish for Long-Lasting Durability

①This bracket is for cars with seat clearance below the trunk, flush with the trunk, or with seat clearance above the trunk (visually less than 5cm).

②The following models cannot be installed with ISOFIX interface brackets: The trunk is in closed state, and the rear seats cannot be put down.

③The bracket is made of high quality steel,sturdy and durable, no rust.