Best Car Strut Rods in 2026

One pair (2 pieces) of Red front bumper lip splitter rod strut tie bar.

These front bumper lip support rods are used to reinforce your front splitter or rear diffuser. The length can be adjustable from 8" to 11".

Elegant surface and exquisite workmanship, perfectly decorate your dear car, always shows your charming and highlight your stylish car.

Length: The length can be adjustable from 7.87" to 13" (200-330mm)

Fitment: Our Front Bumper Lip Splitter Struts are suitable for most model.

Position: This exquisite and compact lever is mainly fixed on the body components, and can also be installed in the car center console or interior trim panel

✔Fixing Function - It is mainly used to fix the body components (front and rear surrounds, skirts, head and tail lips), which can not only prevent the components from falling off abnormally, but also play a decorative role, giving the car a racing effect, full of metal texture.

✔Exquisite Appearance - Bumper Lip Splitter Tie Rod Bars are made of stainless steel and aluminum alloy materials, he appearance is simple and compact, and the quality is good. It not only has practical functions, but also creates a special visual effect in the car.

✔Adjustable - The size of this product is 150mm, and the length can be adjusted appropriately (refer to the picture), according to the needs of your car. Both ends can be rotated at any angle and can be fixed according to the angle of your installation.

【HIGH PERFORMANCE】Sold as a pair, these splitter rods are not just add on cosmetic pieces, but also used to reinforce your front splitter or rear diffuser.

【ADJUSTABLE ANGLE】These include fully articulated top and bottom joints, adjustable 8" to 11" inch length, Rods' articulated top and bottom joints could be installed at any angle.

【PREMIUM MATERIAL】Crafted from aluminum alloy for maximum strength and durability. Subtle design giving your vehicle a clean aesthetic appearance.

Condition: Brand new and high quality, well packed.

Made of high quality stainless steel, weldability, corrosion resistance and heat resistance, durable.

Simple and compact, it is mainly fixed on the body components, such as skirt, surround, head and tail lip, and can also be installed in the car center console or interior trim panel.

Fitment: This front bumper lip splitter struts compatible with universal

Overall Length: 200mm/7.87 inch, it can be maximum extended length: 260mm/ 10.24 inch(0-60mm/ 2.36 inch can be adjusted)

Install Position: Front, left, rear, right.Mainly fixed on body components (front and rear surround, skirt, head and tail lip), and can also be installed in the car center console or interior trim panel.

🚗High quality：It is composed of high-quality aluminum alloy, strength and durability, When the car is running at high speed after installation, there will be no hidden danger between the front lip and the car.

🚗Enough length: Provide Two Adjustable Lengths, Suitable for most models in the car market, You can choose which model is right for your car, The length can be adjustable from 8" to 13", support your vehicle bumper lip splitter to be stronger and upgrade your car exterior to a more awesome eye-catching look.

🚗Scientific connection design: Articulated top and bottom joints, to install at any angle.

Package Include: Pair of Adjustable Splitter Rods

These support rods are used to reinforce your front splitter or rear diffuser

Minimum Length: 6 inch, Maximum Length: 10 inch.

🚗[Universal Size] 🚙Splitter strut rods, the length can be adjustable from 8 inches to 11 inches, stretch according to the lip gap, suitable for all kinds of cars

🚗[Upgrade Material] 🚙Front splitter support rods made with aluminum alloy and stainless steel, with BLACK electroplated paint, smoother and brighter

🚗[Application Scope] 🚙Front splitter rods includes full articulated top and bottom joints which allow them to be installed at any angle and fix it with screws

AIRCRAFT GRADE 6061 - T6 Billet Aluminum Crafted Ends & Barrels

1.75" OF ADJUSTABILITY - Reverse Threaded for Quick Adjustment

PREMIUM STAINLESS STEEL HARDWARE IS INCLUDED - FOUR 5/16"-18 x 3/4" Bolts, FOUR 1.25" OD Washers. Our hardware will NOT rust.

11''-12.7 inch adjustable length, suitable for most vehicles, Additional provide high quality washer Bolt

Made With High Quality T6 Powder-Coated Aluminum, The installation hardware is made of stainless steel,Using the Latest Anodic Oxidation Surface Treatment process.

Heavy-duty designed mounting base and support bar provide you with safety

🚗Splitter Rods --- Adjustable splitter support rods made of aluminum, adjustable 8" to 11" inch length; Color: blue; Set of 2pcs. Rods' articulated top and bottom joints could be installed at any angle.

🚗Strut Rods --- These front splitter support rods are strength and durability, when the car is running at high speed after installation, there will be no hidden danger between the front lip and the car.

🚗Front Splitter Rods --- The automotive replacement strut rods are used to reinforce your front splitter or rear diffuser. Support rods will support your vehicle bumper lip splitter stronger and awesome eye-catching look.

Designed, engineered, tested for GM vehicles

Made in Taiwan

Package Dimensions : 5.3 L x 3.4 H x 4.9 W (inches)

The length and teh angle can be adjustable.

Simple and compact, ultra hard and light weight design.

Durable with extremely high strength aluminum alloy material.

Direct replacement - fits and performs like the original equipment strut rod on specific vehicles

Reliable fit - precision-engineered to match the design and dimensions of original components

Durable construction - manufactured to strict standards using sturdy, safe materials

Practical: These support rods have a new appearance, not only can decorate your car, but also can be used to reinforce your front splitter or rear diffuser to prevent abnormal components from falling off,eliminate turbulence air under the car for more down-force.

High-quality materials:These front Bumper Lip Splitter Strut Rod made of ultra-high-strength aluminum alloy material,simple and compact, ultra-hard and lightweight design, durable.

Simple installation: This exquisite compact rod will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle. These include fully articulated top and bottom joints which allow them to be installed at any angle.

【Universal】These support rods are used to reinforce your front splitter or rear diffuser. Comes with a pair of stainless steel support rods.

【Universal】These support rods are used to reinforce your front splitter or rear diffuser. Comes with a pair of stainless steel support rods.

【Specially Design】 --- Specially engineered stainless steel adjustable tie bars (also known as front splitter rods) are commonly used to in reinforce/support front splitter panels or rear diffusers. New exterior look, can decorate your car.

Universal Design: Bumper Lip Chin Adjustable Splitter Rod Kits Fit Most Vehicles.

Super Practica: Front bar support can eliminate turbulence air under the car for more down-force. It also prevents the component from falling off abnormally.

Premium Quality: Car bumper protector adopt durable stainless steel with extremely high strength aluminum alloy material. Effective bumper lip support for cars.

Fit For Any Car

Material: Stainless Steel | Size: Minimum Length: 4.5 inch Maximum Length: 8 inch

Package Includes: 1x Set of Splitter Rod (2PCS)

Made of sturdy stainless steel for maximum strength and durability

Articulated top and bottom joints design for flexible installation at any angle you like

Easy to install,drilling holes are required to attach to your car tightly and safely

[Dimension] Rod Length: 100mm / 3.94". The length can be adjustable from 7" to 9".

[Material] Made of aluminum alloy, sturdy and durable materials for long time service.

[Design] Articulated top and bottom joints, which allow you to install at any angle. It can provide a fashionable look for the car. Upgrade your car's appearance.

Brand new and high quality one pair (2 pieces) stainless steel front bumper lip splitter rod strut tie bar fit for any car, truck, SUV,help to reinforce the front bumper lip, splitter or diffuser etc.

Made of premium quality aluminum alloy, fine workmanship, high hardness and wear resistance, maximum strength and durability, solid and durable.

High Performance and easy installation. Helps to better reinforce and support front splitter panels or rear diffusers. Equipped with fully articulated top and bottom joints, can be Installed at any angle. Product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle.

Direct replacement - fits and performs like the original equipment strut rod on specific vehicles

Reliable fit - precision-engineered to match the design and dimensions of original components

Durable construction - manufactured to strict standards using sturdy, safe materials

【Fitment】: Our Front Bumper Lip Splitter Struts are suitable for most model.

【Color And Size】: Sliver, 100-230mm / 3.94-9 inch.

【Function】: The front bumper lip splitter strut rod tie support bars universal not only improves the exquisiteness of the body components, but also prevents the components from falling off abnormally.

Universal design: Bumper Lip Chin Adjustable Splitter Rod Kits Fit Most Vehicles.

Premium quality: Car bumper protector adopt durable stainless steel with extremely high strength aluminum alloy material. Effective bumper lip support for cars.

Compact and elegant design: Simple and compact, ultra hard and light weight design. New exterior look, can decorate your love car.

Applicable Models:Bumper Strut Rod fit for general cars.Built to meet standard specification, strictly follow factory quality control.Conform to strict quality control standards, dependable to use.

Aluminium Material:Front Bumper Lip Splitter Strut Rod Made of aluminium, high strength and durable.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.

Function:Front Bumper Support Rod Helps to better reinforce and support front splitter panels.Manufactured according to the original specifications.

Splitter rods - aluminum materials, adjustable 6" to 9" inch length, black color, set of 2pcs. Rods' articulated top and bottom joints could be installed at any angle.

Easy Installation : Require: Product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle.

Strut rods - strength and durability, when the car is running at high speed after installation, there will be no hidden danger between the front lip and the car.

Fitment : This universal Front Bumper Lip Splitter Strut Rod fits for most of vehicles which can meet your various needs .

Aluminium Material ：This Support Rod made of aluminium, high strength and durable.

Light Weight and fashion : Light in weight, easy to install ; bright color, also can be a decoration to make your car fashionable.

The length can be adjustable from 8" to 11"

Product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle

Can be installed at any angle to increase the beauty of the car appearance

Rod Length: 45mm/1.77", Total Length: 140mm/5.51"

This strut rod is able to reinforce the car front splitter.

Articulated top and bottom joints, which could be installed at any angle.