Best Superatvcom Chassis Kits in 2026

【Tank Chassis】: Tank chassis is different from car chassis, which has the track and wheels. By this way, tank chassis can move smoothly in the complex environment, like grassland, sand, and and many little stone. If the car, will be easy to rollover. But the tank chassis has much more width wheel, so can easily pass these cases.

【Necessary for This Car】: Robot technology is difficult. It covers robotic mechanics structure, software, electronic hardware. So, it is necessary to learn the robot for a long time. By using this car robot frame starter kit, you will learn the assemble, controller, and code program, e.g., Arduino, Raspberry pie, Python.

【Metal Panel】: This smart robot car chassis kit adopts metal panel design, with 2 plastic track and 4 wheels. But the price is relatively affordable. It is very suitable for the student for the Arduino/raspberry pie/microbit learning. In the manual, we just provide the referred Arduino code with WiFi, Bluetooth control mode. One can easily DIY the RC tanks.

【Package Included】You will get 1set metal panel, 2pcs DC encoder motors with cable line, 2pcs plastic track / caterpillars, 10pcs plastic load / bearing wheels, 2pcs metal driving wheels, and 1set screw parts and tools. After getting the YP100 tank car chassis, please read the manual before assembling. It's not difficult, but requires a little patience.

【Tank Chassis Learning Kit】This robot tank car chassis looks like a real car chassis, with caterpillar, wheels, LED lights and other components. In the process of assembling the robot chassis, you can learn the structure of the tank chassis. To make the car chassis move, you must lean the electronics to control this car remotely.

【Robotics Platform】This robot chassis can be seemed as a good robot project. For example, you can use many different mainboards, Arduino, Raspberry pie, STM32, Microbit to drive this robot chassis to move. So you can learn about many different communication modes, like wifi, bluetooth, PS2 or infrared.

【Shock Absorption Tank Chassis】: This shock absorbing tank car chassis has 10 pcs bearing wheels, 2pcs driving wheels, in which, 8pcs bearing wheels with 8pcs springs and suspension supporting holders with damping suspension system function. More than 20pcs bearings, to make this tank car chassis runs smoothly with little friction.

【Professional Design】: The metal panel is specially designed for the general control board, like Arduino uno / NodeMCU / Raspberry pie, which makes you assemble the controller board perfectly. Also, reserve many other installation hole locations for servos, sensors, and other electronics board. Specially, this metal panel also can be assembled into the wheel car with 25/37 motor brackets.

【High Torque DC Motor】: Engine is very important for the car chassis. So, one pair high torque DC motor with encoder is equipped with this shock absorption robot tank car chassis. By using the encoder, you can get the speed, wheel rotation, and other feedback, which will enable you to do more research work.

【What You Get】You will get: 1set of metal frame, 4pcs diameter =97mm mecanum wheels, 4pcs 37 DC encoder motors, and screw kit. It's easy to assemble the mecanum wheeled car chassis, just put the robot parts by this Amazon link product. Then, fix it with screws.

【AGV Function】AGV now is very popular in the warehouse to carry the goods. With this robot car chassis based on the mecanum omni-directional wheels and 4pcs encoder motors, you will have use the electronics controller to control the smart car chassis move. It is another choice for the AGV function realization, but with low cost price.

【Robot Learning】This mecanum wheel smart robot car chassis kit belongs to the robotics. You can learn how to assemble it, the robotic structure, the model, the function, then you can design or improve the robot as you like. Specially, you can learn the controllers, like Arduino uno R3, raspberry pie, 51 MCU.

【What You Get】You will get: 1set of metal frame, 4pcs diameter =97mm mecanum wheels, 4pcs 37 DC encoder motors, and screw kit. It's easy to assemble the mecanum wheeled car chassis, just put the robot parts by this Amazon link product. Then, fix it with screws.

【AGV Function】AGV now is very popular in the warehouse to carry the goods. With this robot car chassis based on the mecanum omni-directional wheels and 4pcs encoder motors, you will have use the electronics controller to control the smart car chassis move. It is another choice for the AGV function realization, but with low cost price.

【Robot Learning】This mecanum wheel smart robot car chassis kit belongs to the robotics. You can learn how to assemble it, the robotic structure, the model, the function, then you can design or improve the robot as you like. Specially, you can learn the controllers, like Arduino uno R3, raspberry pie, 51 MCU.

【What You Get】: This mecanum wheel robot car chassis named as MC100, which includes 1pc metal plate, 4pcs 60mm mecanum wheels with 4pcs couplings for TT motor, 4pcs DC TT motors with 4pcs encoders for TT motor, screw kit and other part.

【Beautiful Design】: The metal plate is made of 2mm aluminum alloy, which is very beautiful and strong. The surface is sandblasted and oxidized, with many mounting holes, which is compatible with service, Arduino UNO R3, NodeMCU and Raspberry pie. Other controller kits can also be used. We can provide the Arduino source code of this car chassis.

【Encoder TT DC Motor】: Engine is very important for a car chassis. This smart car chassis is equipped with 4pcs TT DC motors and 4pcs circle encoders. So you can get the speed states or other feedback. This is the best choice for AI robot RoS learning robot kit.

【Solid Metal Structure】This TP200 robot tank car chassis has a 3mm thick metal plate, which is very strong and can bear 5kg. The metal panel has many installation holes to assemble servos, controllers, sensors, and other electronic parts. In addition, the car panel can be installed with a 25mm/37mm motor bracket, which can be installed as a wheeled four-wheel drive trolley. What is even more surprising is that two LED lights are designed on the panel, and the whole car looks very beautiful and generous.

【High Torque DC Motor】Motor is the core for the robot tank car chassis. 2pcs high torque encoder DC motor is used for this robot tank car chassis TP200. One can get the speed feedback by the Arduino UNO R3 / Raspberry pie / Micro-bit programming.

【Flexible Design】This tank car chassis has a beautiful design. 1) The length of track can be adjustable by the requirements. Since different people needs different length of track or for the backup. 2)In the panel design, we reserved installation space for 9g servo and MG995 servo, which can flexibly install ultrasonic sensors and robotic arms. Additionally, the panel has mounting holes for the Arduino UNO R3 and NodeMCU development kits.

【Novelty Design】The robot tank car chassis is designed with novelty. 1) The length of the track can be adjusted for the different assemble; 2) The load wheel is equipped with 2pcs bearing, which make the wheel much small frictions to save energy; 3) All the car chassis is metal excluding the plastic track.

【Robot Learning】In the process of assembling the robot chassis, you can learn the structure of the tank chassis. Also, can learn how to program it based on the electronic development board, like Arduino, raspberry pi, STM32. And do many interesting applications, like video monitor, AR/VR camera robot move platform.

【Robotic Platform】Metaverse is very popular. Based on this robot moving platform model, you can build an AR / VR video camera moving platform. Also, you can build up a moving camera to get some animal photos. This helps school students better understand the construction of robots and can learn a lot from it.

【What You Get】You will get: 5pcs metal panels, 4pcs DC encoder motors with cable line, 4pcs plastic track, 18pcs metal load wheel with bearings, 4pcs metal driving wheels, and other screw parts & tools. After getting the tank car chassis, please read the manual before assembling. It's not difficult, but requires a little patience.

【Novelty Design】The robot tank car chassis is designed with novelty. 1) The length of the track can be adjusted for the different assemble; 2) The load wheel is equipped with 2pcs bearing, which make the wheel much small frictions to save energy; 3) All the car chassis is metal excluding the plastic track.

【Robot Learning】In the process of assembling the robot chassis, you can learn the structure of the tank chassi.s Also, can learn how to program it based on the electronic development board, like Arduino, raspberry pi, STM32. And do many interesting applications, like video monitor, AR/VR camera robot move platform.

【What You will Get】: This mecanum wheel smart robot car chassis named as MC200, which includes 1pc metal plate, 4pcs 80mm mecanum wheels with 4pcs couplings for DC encoder motor, 4pcs DC encoder motors with 4pcs encoders, screw kit and other part.

【Metal Panel】: The metal plate is made of 3mm aluminum alloy, which is very beautiful and strong. The surface is sandblasting oxidation, and has many installation holes, which can be compatible with services, Arduino UNO R3, NodeMCU, Raspberry pie. Also can use other controller kit. We can provide the Arduino source code for this car chassis.

【Encoder DC Motor】: Engine is very important for a car chassis. This smart car chassis is equipped with 4pcs DC motors and 4pcs circle encoder. So you can get the speed states or other feedback. It is the best choice for AI robot RoS learning robotic kit.

【Interesting】 When gotten the robot metal smart tank car chassis kit, it is unassembled for DIY robot interesting by the manual provided in this product link, which is including: 2pcs plastic engineering tracks, 2pcs DC motor, 1pcs metal panel, 1pcs acrylic plate, and other screw kit and other parts. The track can be changed as any length as shown in photo.

【Compatibility】This is ONLY the car chassis. If you want to control the car, one an use Arduino, Raspberry pie, MicroBit, STM32, and other MCU as the controller by using IR, PS2 to DIY RC robotics platform.

【Beautiful】 The metal tracked car chassis is very beautiful on the shape and price. ONLY need little money, one can DIY an AI robot, ROS robot, or other control robotics. The car chassis is metal and very solid, which can also make a wheeled car chassis if you have the wheel.