Best Bosch Chisels in 2026

3/8 In. thickness

Flat face with blunt tip

Designed to avoid damage to brick work or decorative stone

New Inductive hardening process

30-Percent longer service life equals longer life

Higher wear resistance

ALL-IN-ONE KIT: This multifunctional 6 piece chisel set by Zelcan includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel, so you can work on any material from ceramic tile to concrete, brick, and masonry to real and artificial stone, including granite

SDS PLUS SHANKS: These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, compatible with Bosch, DeWalt, Makita, Milwaukee, Hilti, or any other

NON-SLIP CONNECTION: Our handles are crafted for tight nonslip use thanks to the precise grooves and powerful torsion resistance, giving you a long-lasting service life even under punishing use

SDS-PLUS SHANK: Works well with SDS-Plus rotary hammer for optimal use, compatible with Dewalt, Bosch, Milwaukee, Makita, Hitachi electric or cordless SDS Plus system impact drill and rotary hammers.

Firecore bent tile chisel with ergonomically angled working end, guarantees tile and thinset removal in high efficiency rate, removes material up to 30% quicker than conventional tile chisels.

Special hardened steel alloy with heat treatment process, durable to support you with all kinds of scaling jobs.

ALL YOU NEED - 4 Piece SDS+ Chuck Set includes: 1 Point Bit 10" Long + 1 Flat Chisel Bit 10” Long x 0.8" Wide + 1 Scaling Chisel Bit 10" Long x 1.6” Wide + 1 Tile Chisel Bit 10" Long x 1.6” Wide

TILE CHISEL INCLUDED - designed with 20 bend Angle and specially shaped for prying and removing tiles in one piece

MULTIBLE USE CASES - This set is perfect to use for working on concrete, masonry, wall, bricks, stone and road

Includes: 1 - Thinset Scraping Bit 3” x 10”

Our high quality SDS Chisels are designed to work in masonry applications; brick, stone, concrete, block, stucco, thinset, tile, etc

Compatible with all SDS Plus sized rotary hammer drills; Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc.

ALL COMMON SIZES - 7 pcs of SDS Plus Masonry Drill Bits in all common sizes: 1/8, 2x 1/4, 2x 5/16, 3/8, 1/2" all of them comes with a 6” length.

CARBITE CROSS TIP - 4 solid Cross tipped carbide sheaths for maximum destructive power and high drilling speed.

COMPACT PACKING - The most compact packaging on market, so the kit will fit perfectly into every drill case.

SDS Plus Shank, compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi

Firecore bent tile chisel with ergonomically angled working end, designed for easy removal of tiles from floors and walls

Special hardened alloy steel and special surface treatment for universal removal of material on a larger scale

Made of high quality hardened steel alloy with heat treatment process this scaling chisel is very hard and durable to support you with all kinds of scaling jobs especially good for removal of old tiles, thinset, mortar and other adhesive

3"(75mm) wide and 10"(250mm) long, the longer length is easier and much more comfortable for operation. It also supports to reach into the corner and place where there is no enough space

Optimal geometry design offers comfortable use with less vibration, machine sharpened edge guarantees high efficiency in tile and thinset breaking and removing

Digs hard-packed gravel and dirt (not for use with concrete)

Fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hilti hammers using TE-Y and TE-FY shanks (sold separately)

High-quality hammer steel for durability

For concrete removal and hard surface break-up

Fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hilti hammers using TE-Y and TE-FY shanks (sold separately)

1 In. chisel width and 12 In. long SDS-max shank

Made of high quality hardened steel alloy with heat treatment process this scaling chisel is very hard and durable to support you with all kinds of scaling jobs especially good for removal of tiles, concrete, thinset, mortar and other adhesive

3"(75mm) wide and 6.5"(165mm) long, compact and flexible for operation. Drop forged body with a sand-blasted finish

Optimal geometry design offers comfortable use with less vibration, machine sharpened edge guarantees high efficiency in tile and thinset breaking and removing

SDS-PLUS CHISEL SET: three of Bosch's most innovative chisels with 30% longer life and more material removal than standard chisels

HS1472 STAR-POINT CHISEL TWIST: features a uniquely shaped head with a star-point twist tip that is self-sharpening and less prone to jamming

STAR-POINT HS1472: delivers a wider material-removal footprint and is a self-sharpening chisel, for longer life

This SDS Plus Hammer Drill Chisel Set is made of Premium chromium vanadium steel material, can avoid breakage,strong and durable,special face treatment to made the surface becomes rough, increasing toughness and hardness, and reducing wear to a greater extent.

This multifunctional 6-piece chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel, work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone, even granite.

This Rotary Hammer Bits Set is suitable for use with light rotary and demolition hammers from all common power tool brands,perfectly into your SDS Plus hammer drill,Compatible with Bosch, DeWalt, Makita, Milwaukee, Hilti, or other brand.

Premium Material-42CrMo: Thanks to 42CrMo STEEL, which provides better Strength, Toughness and Hardness than 40CrMo steel, Firecore SDS plus chisel is able to withstand more wear, pressure and damage than other 40CrMo steel chisels, to ensure quality, long life and high efficiency.

15° Ergonomic Angle: Slightly angled working end of sds plus chisel facilitates the operation, delivers material removal more efficiently, prevents user from excessively leaning over and improves user ergonomics.

SDS Plus Shank: Compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi.

Specialist tile & thinset removal tool ------ Designed particularly for the job of removing tiles, thinset, mortar, old linoleum glued to the concrete slab and other stubborn adhesives with completely clean finish without damaging the concrete subfloor. It can also be used as an ice scraper to remove ice from deck and sidewalk with perfect result in Winter. This scaling chisel is for 3/4" shank SDS-Max hammers. It does not fit into SDS-Plus hammers and Spline hammers.

High efficiency and time saving ------ The extra wide 4.5" blade (50% more width than normal 3" scaling chisel) removes more tile and thinset per pass. It also allows you to reach into the corners or along the wall where the grinder may not be easy to reach. More length (14" long) than normal chisel is much easier and more comfortable for operation. It offers you great efficiency and save you a lot of time and effort

Super quality and practical design ------ Made of high quality hardened steel alloy this chisel is designed with optimal geometry specifically for high impact stresses, durability and long life time

SDS-MAX CHISEL SET: two of types of most common chisels with 15% longer life and more material removal than standard chisels

R-TEC TECHNOLOGY: uses an energy-diverting reflection element that increases material removal by 15%

HS1904 BULL POINT CHISEL: has a bull point tip and a 16 In. long one-piece shank

1/4 In. thickness

Flat face with blunt tip

Designed to avoid damage to brick work or decorative stone

Suitable for use with light rotary and demolition Hammers from all common power tool brands with SDS-plus chuck

Fast, tool-free drill bit and chisel changes thanks to SDS-plus system saves a lot of time and effort

High-grade steel and optimum hardening process guarantee long service life and consistent quality

Made of high quality hardened steel alloy with heat treatment process this scaling chisel is very hard and durable to support you with all kinds of scaling jobs especially good for removal of old tiles, thinset, mortar and other adhesive.

Length: 10 inch(250mm), Blade Width : 3 inch(75mm), Slightly angled working end for easy and accurate starting and directing, designed for easy removal of tiles from floors and walls, and better protect the wall from damage.

Optimal geometry design offers comfortable use with less vibration, machine sharpened edge guarantees high efficiency in tile and thinset breaking and removing

SDS Plus Shank, compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi

Firecore bent tile chisel with ergonomically angled working end, designed for easy removal of tiles from floors and walls

Heat-treated, forged steel body for increased durability, provides long-term in mortar removal and tile removal. Features three locking bolts to form a stable anti-vibration structure, and has anti-pine gum for fixing.

RUST RESISTANT BLADE: Coated with decorative and hard-wearing anti-rust lacquer, Firecore SDS Plus floor scraper heavy duty can withstand degradation due to moisture, oxidation, or exposure to a variety of environment for maximum run life.

STABLE BLADE ATTACHMENT: Features locking bolt-and-nut fasteners for more secure blade attachment and better resistance to vibrating loose than non-fastner tile removal bit.

SDS PLUS SHANK: This grout removal tool is compatible with electric or cordless SDS plus system impact drill and rotary hammers, such as Dewalt, Bosch, Milwaukee, Makita, Hitachi.

SDS PLUS SHANK: Floor scraper heavy duty is compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi.

3 SPARE BOLTS & LOCKNUTS: Comes with 3 spare alloy steel bolts and nuts, which provides secure blade attachment and better resistance to vibrating loose of the tile removal tool. The blade is replaceable with Firecore replacement blades.

5" WIDE BLADE: Firecore SDS plus floor scraper delivers 25% more material removal than standard blades, can be used for tile removal, mortar removal, and laminate floor and laminate glue removal.

TWO-IN-ONE DUSTLESS SOLUTION: Features the BlueCollar R-Tec chisel and adapter already attached, for 5x faster assembly

FLAT CHISEL HEAD: Self-sharpening with a no-jam design

R-TEC TECHNOLOGY: Uses an energy-diverting reflection element that increases material removal by 15 percent

Firecore bent tile chisel with ergonomically angled working end, guarantees tile and thinset removal in high efficiency rate, removes material up to 30% quicker than conventional tile chisels.

SDS PLUS SHANK: Floor scraper heavy duty is compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi.

3 SPARE BOLTS & LOCKNUTS: Comes with 3 spare alloy steel bolts and nuts, which provides secure blade attachment and better resistance to vibrating loose of the tile removal tool. The blade is replaceable with Firecore replacement blades.

SDS-PLUS SHANK: Works well with SDS-Plus rotary hammer for optimal use, compatible with Dewalt, Bosch, Milwaukee, Makita, Hitachi electric or cordless SDS Plus system impact drill and rotary hammers.

Firecore bent tile chisel with ergonomically angled working end, guarantees tile and thinset removal in high efficiency rate, removes material up to 30% quicker than conventional tile chisels.

4 in. wide blade, 10 in. overall length, the bolts have been assembled in advance. Replaceable 4 inch extra wide blade allows for more upright scraping and removes more thinset per pass.

SDS Plus Shank, compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi

Firecore bent tile chisel with ergonomically angled working end, designed for easy removal of tiles from floors and walls

Special hardened alloy steel and special surface treatment for universal removal of material on a larger scale