Best Cameras Clamps in 2026

Tough polymer construction will last for years

Includes 20 mini clamps

Perfect for smaller spaces

Strong And Even: 3.5-Inch-Wide Padded Jaw Provides Constant, Even Pressure Without Damaging Material And The Passive Lock Jaw Stays In Place When Winding The Clamp

Perfect Pressure: Not Too Loose, Not Too Tight, Just Right With 1,100Lbs (500Kg) Of Clamping Pressure

Rock-Solid Stability: The Parallel Clamps Versatile Uses And Stability Will Help You To Deliver A Superior Finished Product You Can Be Proud Of

3.5-Inch Wide Padded Jaw Provides Constant, Even Pressure Without Damaging Material And The Jaw Stays In Place When Winding

1,100Lbs (500Kg) Of Clamping Pressure

Large, Easy-Grip Handle Makes It Easy To Lift And Slide Jaw Up And Down

Cut Any Angle: BORA Track Clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate

Easy Set Up: Attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock it in place

Non-Marking Grip: Each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations

Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw

Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project

Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use

Clamping end moves with handle for easy adjustability from one side

Locking handle grabs work surfaces for a secure grip that won’t budge

Made of heavy-gauge, rigid aluminum for extreme durability

Product 1: Clamping end moves with handle for easy adjustability from one side

Product 1: Locking handle grabs work surfaces for a secure grip that won’t budge

Product 1: Made of heavy-gauge, rigid aluminum for extreme durability

Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time

100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.

Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.

Large 4" jaw capacity is ideal for thousands of projects.

Easily and securely attaches to your drill press’ table. The holes are 4-1/2" long and are 5" apart, allowing for virtually any manufacturer’s drill press to be accommodated.

Aluminum die cast body with steel jaws securely holds your material without marring it.

EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw.

WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true.

WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration.

Fits into NGX Clamp edge saw guide to increase length by 50 inches

Quick set up

Made of heavy-gauge, rigid aluminum for extreme durability

WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability

Adjustable clamp end on straight edge slides easily up and down to fit material to be cut

Locking clamp edge handle grabs work surfaces for a secure edge that won't budge

COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides

EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora WTX Clamp Edge

GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length allows you to saw with precision and skill up to 100 inches when paired with the 50-inch WTX Clamp Edge

Extra wide 3-3/8-Inch aircraft-grade, extruded aluminum body

Integrated dual "T" tracks allow the head of a standard 1/4-Inch-20 bolt to slide into the "T" track to attach shop accessories

Integrated clamping mechanism with a large, soft grip clamp surface

35 lbs (16kg) of clamping pressure

Ribbed frame designed for resilience

Composite construction is strong and light weight

WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability

Adjustable clamp end on straight edge slides easily up and down to fit material to be cut

Locking clamp edge handle grabs work surfaces for a secure edge that won't budge

Made of heavy-gauge, extruded aluminum for extreme durability

Adjustable clamp end slides easily up and down saw guide to fit material to be cut

Locking handle grabs work surfaces for a secure edge that won't budge

Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge

Ridged aluminum straight edge guides make straight, accurate track saw like cuts

Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces

Squares your clamp edge to the material you are cutting

Trapezoidal wedge system makes it easy to connect components

Precision aluminum extrusion profile perfectly matches clamp edge fixed head