Best Left Commercial Keyed Locksets in 2026

Excellent quality and a great value. The Dynasty Hardware panic bar exit device has passed testing of over half a million cycles and is grade 1 certified. This panic device with exterior lever is ADA approved for medium to high traffic doors.

This panic device is reversible so it can be installed on right or left hand doors. This set includes an exterior lever that can be locked or unlocked using the provided keys. This panic device uses a SC1 keyway.

Each set includes a dogging feature and includes the dogging hex key. . Dogging a device holds the latchbolt retracted removing the need to turn the lever or push the panic bar to retract the latch and open the door. You essentially only have to push or pull the door for it to open when the exit hardware is “dogged” This is perfect for high traffic doors.

Overall Length Is 31" Fits Doors 30" thru 36" Wide - Not For Use On Glass Doors

This crash bar is reversible and will fit either right or left hand doors. Rated for commercial use this push bar panic exit device is suited for use in office buildings, retail spaces and hotels.

The Dynasty Hardware Grade 2 Heavy Duty Commercial Rim Exit Device For 30 thru 36" wide doors can be cut to size. Aluminum Finish. Suitable for both wood or metal door applications. Easy Installation. Excellent Quality Panic Hardware. Strike Plate, Dogging Key and Screws Included. Exterior lever trim sold separately.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Entrance/Keylock" variety involves Turn/push-button locking: push-button locks the outside lever until it is unlocked by key or by turning the inside lever. Pushing and turning button locks outside lever, requiring use of a key until the button is manually unlocked. Interior lever is always free for emergency egress at all times.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Entrance Keylock w/ Clutch" variety has Push/Turn Entry Function w/ built-in clutch (Vandal resistant with free-wheeling clutch lever mechanism (when door is locked, outside lever freely rotates--while staying locked-- so vandals can not break the lever to gain access)

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from CLG HARDWARE are available for specific entrances. This "Storeroom Function" variety is commonly used in storerooms and mechanical rooms. When the door is closed, it is always locked (rigid) from the outside and requires a key to open. Door is always open from the inside for emergency egress.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Privacy Function (The outside lever is locked by pushing a button on the inside and can be unlocked from the outside by using a flat object (coin or screwdriver) to turn the button for emergency entrance. Also, Turning inside lever or closing the door will release the button. Inside lever is always free for immediate egress.

COLOR & SIZING - Satin Chrome/Aluminum finish (26D finish) - Fits 1-1/2" to 2" thick Doors and comes standard with 2-3/4" backset <br><br> NON HANDED: This commercial grade lever set is perfect for either Right Hand or Left Hand doors.

STRIKE & FACEPLATE: Comes with standard ANSI 4-7/8" x 1-1/4" square corner strike and 1-1/8" x 2-1/4" square coner faceplate