Best Red Computer Cases in 2026

New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation

Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive

STREAMLINED COOLING: 2 Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling

Small HDD Case: Inner size: 5.5*3.5*1in, weight :110g; Great for all 2.5 inch hdd/ssd and other small electronic accessories,like power banks less than 5.9*3.3inches, usb cables, chargers and so on

Hard HDD Case: Sturdy EVA hard shell and thick polyester liner will prevent backlogs and collisions, allowing you to safely place, stack and carry on business trips

Safty Protection: Waterproof shockproof, dust-proof and wearable external hard drive protective box with built-in elastic straps, mesh netting, durable nylon molded and ribbed exterior

NEW FEATURES: Front I/O USB Type-C Port, Tempered glass side panel with single screw installation, and upgraded Smart Device V2

MORE MODERN: USB 3.1 Gen 2-compatible USB-C connector on the front panel, it’s easier than ever to connect the newest smartphones, high-speed external storage, or the latest peripherals to your PC

SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.

F-Lux Platform: Advanced Case Structure For Excellent Airflow + 5 X 120Mm Fans Included

Argb & Pwm Fan Controller

Provide Massive Airflow To Your Components With Room For Up To 9 X 120Mm Fans

【Maximum Capacity】Memory card box can accommodate 8 SD cards and 4 CF cards and 12 Micro SD/TF Cards,total 24 slots

【Safety】Molded rubber interior lining, durable polycarbonate resin exterior with a weather-resistant seal to keep out water, dust, and debris using ABS and thermoplastic rubber material, protect your memory card from being damaged

【Fine Workmanship】The ergonomic locking system can be opened and closed easilyEach slot is strictly tailored to fit the card perfectly. sealed buckles prevent water from seeping, provide full protection for your cards

NEW FEATURES: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation

ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive

STREAMLINED COOLING: Two Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removeable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling

Panoramic Views: No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.

Exclusively Vertical GPU Mounted: Why would you want to see your graphics card any other way?

Included PCIE 4.0 Riser Cable: A protective riser cable canopy integrates beautifully into the case, allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind, made specifically for the Y60.

Official case for the Raspberry Pi from the Raspberry Pi Foundation

Removable Lid provides easy access to the camera and display ports

Removable Side Panels with easy access to the GPIO port

Essentially Designed USB Flash Drive Bag Case Organizer / Electronic Accessories Travel Organizer; Only the Case Included

External Size: Length * Width * Height = 4.2'' * 2.5'' * 1.3'' / 10.5cm * 6.5cm * 3.3cm; Internal Size: Length * Width * Height = 3.7'' * 2.1'' * 1'' / 9.5cm * 5.5cm * 2.5cm

Made of Waterproof, Shockproof, Heavy-duty and Durable Material to Made the Case a Qualified Helper in Your Life

[LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header)

[BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software

[27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off

Keep your phone fully protected, shock proof and scratch resistant

Provide easy access to all functions

Hybrid double layer of TPU and polycarbonate gives your phone great protection

Protective Carrying Case Fits for SAMSUNG T7/ T7 Touch Portable SSD 1TB 2TB 500GB- Up to 1050MB/s - USB 3.2 External Solid State Drive, Not fits for Samsung (MU-PA500B/AM)T5 500GB 1TB 2TB Portable SSD(CASE ONLY NO SSD INCLUDED)

External SSD Case for Samsung t7: Portable hard drive case made of EVA materials-shockproof, scratch proof, water-resistant and comfortable pu leather finishing. Protect for Samsung ssd against damage, keep ssd brand new and prolong the life of the ssd.

Tailor-made box with nice cut inner supporter, fits for Samsung more stable. Extra shockproof layer and elastic band make for SamsungT7 Touch more stable and safety. Unique finger grooves allows you easy to put in and take out the ssd. Strong and smoothly zipper more luxury and safety.

3 x 120 millimeter RGB Fans Pre Installed in the front

Dark Mirror Front Panel with Temper Glass side panel

3 Customizable Color Trims (Red/Black/White)

The Original credit card sized micro SD card holder! Superior Quality!

Flexible ABS plastic tabs hold your memory cards securely. Does not break like PVC

Never lose your micro SD memory cards using The World's Best SD Cardholder

PRECISION CUT CRAFTSMANSHIP: Comprised of 14 aluminum panels, ensure perfection in every curve and edge

UNRIVALED PERFORMANCE AND BEAUTY: 4 mm tempered glass panels on both sides, show off your gear

EXTENSIVE LIQUID COOLING SUPPORT: Enables 360mm installation with ease in the front and the top

3 sides of sleek and sturdy tempered glass in front and both sides to show off hardware and internal components

Customizable and ventilated PSU shroud basement that supports 3 x 80mm fans to promote heat dissipation

Excellent airflow from 4 pre-installed 120mm red LED cooling fans; supports up to 2 additional 140mm fans on top or 6 total 120mm

Fits 4 CF memory cards and 3 SD memory cards

Compact and fits easily in your pocket

Built in business card holder makes for easy identification

Mesh Front Panel.

Type-C 3.2 Gen2 Ready.

1 x 120mm Fan Included.

Full Tempered Glass side panel for ATX Mid Tower Computer PC Case

Front Design for maximized Airflow with two front 120mm fan pre-installed (& one rear 120mm fan pre-installed)

Convenient Interface with one USB, 3.0 & two USB 2.0

☞⚠❤️🛑⭕️‼️ NOTE: Before placing order, PLEASE make sure to verify your laptop model number as this case is MODEL specific and NOT interchangeable. ‼️⭕️🛑❤️⚠☜

❌‼️🛑⭕️ NOT fitting other 11.6-inch Acer laptops. NOT compatible with ANY other laptops as well. ❌‼️🛑⭕️

Made of high-quality translucent polycarbonate material which is shatter-proof and will protect your 2016~2020 11.6" Acer Chromebook R11 CB5-132T C738T series Convertible Computer all around

Clean and elegant design that can be recognized by the refined aluminum front and top panels. Controllable LED lighting (LED strip and Fan LED). polished chamfers that subtly accentuate the intake and exhaust areas.

Stealth interior: hidden PSU / hidden HDD / hidden cables and grommets (modular cable cover). Extreme cooling capacity, providing up to 16 different fan mount locations (120mm / 140mm). 5 included Phanteks' premium fans PH-F140SP. Innovative liquid cooling mounting systems: radiator brackets for easy installation (bottom and side), cable cover can be transformed into a reservoir bracket with pre-drilled mounting holes and a universal pump bracket with vibration dampening function.

The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management. Dual repositionable and removable HDD cages (support up to 6 HDD's) for more Installation flexibility or unrestricted airflow. Closed HDD panel Strengthens the chassis' Rigidity, even when both HDD cages are removed.

3 ARGB Fans Included : 2 x 140 mm ARGB fan in front & 1 x 120 mm ARGB fan in rear.

Tempered Glass Side Panel : Tempered Glass Side Panel can enjoy the simple and clean white appearance without losing the gorgeous RGB effect which inside your rig.

High Efficiency Cooling Design : 2 x 140mm ARGB fan which installed in front of the case, effectively drive the air convection to achieve awesome cooling effect for your rig.

【New Design & High Capacity】This memory card case stores 24 SD/SDXC/SDHC and 24 Micro SD/SDHC/SDHC/MSD/TF cards with individual transparent plastic card holders (memory cards are NOT included), meet your daily memory cards storage needs.

【Strictly Tailored】The interior customized EVA foam features shock absorption and offers the utmost protection. The case inside features 24 plug-in slots for storing clear plastic memory cards case. Independent slot holds the item securely in its slot and keeps it safe from getting knocked around. This case allows you to keep cards more organized and at your fingertips.

【Double Protection】This memory card case is made of high-quality PC material and is pressure-proof, sturdy, and durable. It is water-resistant and can effectively keep dust free. The plastic clear case comes with snap-tight closure lid, which has good sealing ability. It can prevents moisture, dust, and debris from entering the case and damaging your cards.

What you get: come with 6 pieces sunglasses case with different colors, black, blue, red, green, yellow, purple, and come with 6 pieces glasses cloth, ample quantity and color choice is convenient for you to sort and place glasses orderly

Material: our portable eyeglass case is made of EVA mainly, semi-hard structure is enough lightweight and durable, keeping your lenses from bending and breaking, the lining is soft and can help block dust or dirt

Fit most glasses sizes: the size of our hard eyeglasses case is approx. 7.0 x 3.0 x 2.5 inches, fit for most standard sized glasses, sunglasses, computer glasses and more, providing your glasses nice protection

What you get: you will receive 3 pieces hard shell eyeglasses cases with lining in different colors to protect your glasses, and at the same time, 3 pieces black eyeglass cloth are provided for you

Sturdy and lightweight: the glasses case is designed to protect your eyeglasses from being scratched and dirtied, keeping your glasses safe and clean; Also it's light in weight, which is convenient for you to carry

Fits most glasses: the sunglasses case is suitable for carrying small or medium sized glasses, such as blue light blocking glasses, reading glasses or computer glasses, convenient for you to fit in any pocket or bag, also the case can serve as a multipurpose storage tool for small items

Two preinstalled Fractal Design Silent Series LL 120mm White LED fans

Six total fan positions for high-airflow capability

Support for high-profile CPU coolers and multiple radiator configurations

Hinged Glass Side Panel: Experience effortless style and functionality with the Hinged Glass Side Panel. Its beautiful, full edge-to-edge tempered glass design swings open for quick access to your interior components, making installation and cleaning a breeze.

Full White High Airflow Mesh Design: Say goodbye to stuffy builds with the Full White High Airflow Mesh Design. The front panel is fully meshed from top to bottom, and 2 side air vents ensure rapid delivery of cold air to the inside of your case.

4x Pre-Installed RGB Fans: Add some flair to your build with 4 pre-installed RGB fans, from front to rear. Whether you're gaming, working, or just using your PC, the lightshow created by these fans will leave a lasting impression.

EXCLUSIVE: Computer Dimensions (W x D x H) : 305.2 x 203.2 x 6.2-11.8mm / 12.01 x 8 x 0.24-0.46 in.It is especially designed for 13.3 inch Samsung Galaxy Book S SM-W767PZAASPR SM-W767VZAAVZW/Galaxy Book Ion 13 NP930XCJ NP930XCJ-K01US.(Device not included)

WARNING: NOT compatible with Samsung Galaxy Book Flex 15.6 NP950QCG Series Laptop/Samsung Notebook 3/Notebook 5/Notebook 9/Notebook 9 Pro/Notebook 9 Pen Series Laptop.Most of returned because of choosing wrong model,please confrim your laptop model.

HIGH QUALITY: This protective case is made of high quality PU,beautiful in appearance,exquisite in feel,waterproof and dustproof, shockproof and wear-resisting.That soft inner layer of cashmere will better protect the laptop.

RGB LED Controller (RGB LED Lighting SYNC Ready): SYNC with the RGB LED control software provided by the Zalman allowing various RGB Modes and Colors (6 Pin / 8 ports) with RGB LED Control Button

4x Pre-insalled 120mm RGB LED Ring Fans provide various lighting effects (Red, Green, Blue, Yellow, Violet, Sky Bule, Light Blue) with Action Mode

Tempered Glass front and side panels for beautiful aesthetic view of the inside components

Optimized Cooling Performance – Hairline pattern front and side mesh design along with 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel.

Powder Coated Steel – The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant.

Versatile Layout – T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards.