Best Omen Computers in 2026

Eight bays hold Raspberry Pi and MOST single-board computers or 2.5" hard drives (RPi 4B compatible).Room for most 8-port switches (maximum size of 4 1/2″ x 8 3/4″ x 1 5/8″)

Plates click securely into place for fast removal without bolts. Made with double thick acrylic for high durability

Multiple Cloudlet Cases can be bolted together, either vertically or horizontally for modular clusters.

Eight bays hold Raspberry Pi and MOST single-board computers or 2.5" hard drives (RPi 4B compatible).Room for most 8-port switches (maximum size of 4 1/2″ x 8 3/4″ x 1 5/8″)

Plates click securely into place for fast removal without bolts. Made with double thick acrylic for high durability

Multiple Cloudlet Cases can be bolted together, either vertically or horizontally for modular clusters.

Designed and Made in Tacoma, WA USA

Good ventilation & More Room For HDMI Cable

Includes: Power Cord w/ switch, 3 heatsinks, and rubber feet

Black Acrylic. Fits VESA standard 100mm, 75mm and 50mm mounting holes

For Raspberry Pi 4B, 3, Pi 2, B+ and A+ (not included)

Mount board directly or upgrade existing Zebra case (case sold separately)

Designed and Made in Tacoma, WA USA

Compact design compatible with pHATs

High quality materials with custom hardware

Stack any three Zero boards together. Note: Raspberry Pi Zero 2 has not been tested for heat issues.

Holes between layers allows the GPIO's of boards to be connected with wire

Versatile for future layers

For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM Board V1.0 (not included), and a 3.5″ Enhanced Nextion Touchscreen NX4832K035 (included). The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)

Assembly of Case kit is required. We have carefully designed it to precisely fit these components using Laser cut parts and stainless steel hardware. Full body coverage for Raspberry Pi and Nextion screen (not waterproof). Heat sinks and rubber feet included.

*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.

Fits Raspberry Pi Zero Version 1.3 & Zero Wireless (not included). Note: Raspberry Pi Zero 2 has not been tested for heat issues.

High quality materials with stainless steel custom hardware

GPIO Access

For Raspberry Pi 4B, 3B, 3B+ and 2B (Not Included)

Includes interior 40mm 5-volt fan and rubber feet

Includes stainless steel hardware

Upgrade for our Zebra Raspberry Pi Cases <b>(Case not included)</b>

Specifically Designed to Accommodate the sense Hat

Designed and Made in Tacoma, WA, USA

Fits Raspberry Pi Zero Version 1.3 & Zero Wireless (not included). Note: Raspberry Pi Zero 2 has not been tested for heat issues.

High quality materials with stainless steel custom hardware

GPIO Access

If you have a Generic Chinese MMDVM Board (Jumbospot) there is a new case model: JRPI-3.5NSX

For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), ZUMspot Brand MMDVM Board (Not included), and a 3.5" Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.

*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.

Case Kit Compatible with Raspberry Pi 4B, 3B+, 3B, 2B, B+ (not included) and Official Raspberry Pi PoE Hat (not included) or PoE+ Hat (not included).

Clear Acrylic and three accent colors to choose from: Black, Blue or Wood

Stainless steel Hardware

Note: Will fit new Ultimate GPS HAT manufactured 2021-2022. Full body coverage for Raspberry Pi (not included) and GPS HAT (sold separately)

Cut outs for easy access to SD card. Access to the GPS HAT's antenna port

***Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.***The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)

This is an UPGRADE ONLY for Zebra Case - Raspberry Pi 3B+, 3, 2, 2B and B+ (Black Ice) Heat Sinks and Power Supply Included (sold separately)

Break-apart layers that provide customization to the openings for components and cables

Tall Top HAT adds extra 3/4″ clearance

Designed and Made in Tacoma, WA USA

Compact design compatible with pHATs& access to camera port.

High quality materials with custom hardware

Need just one? Look for the single pack available on Amazon

For Arduino Nano (not included)

Air vents allow for cooling. Cutouts for access to pinouts

Fits Raspberry Pi Zero 2 (not included)

High quality materials with stainless steel custom hardware

Cut outs for easy access to SD card and camera ports

A slim sleek looking case to protect the Pro Micro developer board (not included)

Compact design protects usb port and board

Designed to be compatible with Inland Brand of the Pro Micro developer board with Micro-USB.  Cannot guarantee the fit other brands.

For Raspberry Pi Zero and Zero W (not included) and the Zero4u Rev 2 (not included)

Does not fit new Zero 2 due to heatsink location. Compact design with access to GPIO

Provides full coverage for both Raspberry Pi Zero and Zero4u Rev 2 (not included). Note: Raspberry Pi Zero 2 has not been tested for heat issues.