Best Ford Crankshaft Pulleys in 2026

Provides power to the engine accessory drive system for proper engine performance

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

KIPA Top-grade crankshaft pulley is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value

Specification: Pulley Diameter is 6 9/16", Pulley is 2" Tall, Bolt Pattern is 2 3/4", Center Hole is 1 1/8", Machined From Billet Aluminium, These Feature deep grooves to prevent belts from slipping. This is a Triple groove pulley designed for your Small Block Chevy with a Short Water Pump. This has a 6.6" Diameter.

Fitment: This crankshaft pulley Fits all SB Chevy Engines when using a short water pump SWP. This crankshaft pulley Fits SB Chevy 265 283 305 327 350 383 400 using a short water pump SWP.

Professional grade 50mm socket (with offset design) for removing/installing many Acura and Honda engine crank bolts

This socket is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.

Use with square socket driver.> 1/2" square drive use with breaker bar

Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.

Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.

Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.

Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.

Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.

Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.

Double belt groove

6-3/8 inch diameter

Identify the water pump by looking at the distance between it and the timing cover, long water pumps are about 1 inch away from the timing cover

Harmonic Balancer For Mini Cooper S R52 R53 2002 2003 2004 2005 2006 2007 2008

Aftermarket Product with Premium Quality. 1 Year Warranty

Enhance Performanc.Easy Installation.High Reliability.

【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many Acura and Honda engine.

Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows access to removal of crank shaft bolt.

【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications

Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.

Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.

Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.

FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998; Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase )

HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure

APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement; Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.

Ford Small Block V-Belt Crankshaft Pulley - 4 Bolt Crank with 2 Grooves

Made in the USA from 6061-T6 Billet Aluminum

Underdrive Ratio Increases Horsepower by 10 - 20 HP

COMPATIABLE VEHICLES - Harmonic Balancer Compatible for 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 for Toyotary 1994 1995 1996 1997 1998 1999 for Toyota Celica 1996 1997 1998 1999 2000 for Toyota RAV4 1999 2000 2001 for Toyota Solara

PRODUCT FEATURES - Precision machined to providing smooth performance at all engine speeds.With the features of low noise,low vibration and good balance

PERFECTLY FIT - Parts are developed to the OE design, ensuring they will install properly and function as intended

1 YEAR WARRANTY: All Febest Parts come with a 1 Year Warranty backed by great customer service.

QUALITY IS EVERYTHING: The synthetic lubricant Febest uses is 10x as expensive as our competitors, and lasts 3x as long.

GERMAN QUALITY CONTROL: Febests German quality control experts ensure that all parts are of the utmost quality. We have specially developed metals and rubbers that create a super durable, and long lasting end product.

1 YEAR WARRANTY: All Febest Parts come with a 1 Year Warranty backed by great customer service.

QUALITY IS EVERYTHING: The synthetic lubricant Febest uses is 10x as expensive as our competitors, and lasts 3x as long.

GERMAN QUALITY CONTROL: Febests German quality control experts ensure that all parts are of the utmost quality. We have specially developed metals and rubbers that create a super durable, and long lasting end product.