Best Benchmark Abrasives Cut Off Wheels in 2026

Cut-off Wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel. Ideal for easily cutting or slotting bolts, screws or sheet metal, thin wood, ceramic and plastic.

The EZ456B includes 12 fiberglass-reinforced cut-off wheels designed to last 2X longer compared to the 426.

The EZ456B is designed with the patented EZ Lock system making accessory changes 6X faster than using a standard mandrel by eliminating the need for a screw and a screwdriver.

RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.

HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.

DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.

Thin .045" wheel design for fast burr free cutting

Proprietary aluminum oxide grain combination for aggressive cutting action

Proprietary Material Mix ensures durable long life wheels

25 Pack Premium Metal Cutting Discs

4-1/2" x 1/16" Cut Off Wheel with 7/8" Arbor

1/16 Inch (.0625") Thickness for Long Life and Increased Durability

The Dremel EZ Lock makes accessory changes easy as pull - twist - release

Cuts 1 by2-Inch thick floor tile and ceramic materials

Cut off wheels make straight cuts with little dust

Aggressive cutting and grinding wheels that will get the job done fast.

Excellent value for the professional that needs a tough, aggressive wheel.

Dual reinforcement provides added strength for aggressive cutting.

Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication.

Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness.

Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13,000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost.

🗿LONGEST LASTING: 6 in cut off wheels for metal feature metal center and ultra-thin 0.040" thickness. 25 pieces cut off wheels for metal & stainless steel meet ANSI safety requirements. Dimensions: 6"x.045"x7/8"

🗿 FITS ANY ANGLE GRINDER: 25 PCS cutting disc for metal & stainless steel fast burr-free cutting features 6"x.040"x7/8", compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.

🗿 MULTIPLE UESES: 6 cut off wheels for metal are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals.

☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8"

☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up

☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.

Premium and Value Materials - Panlen cutting discs are made of aluminum oxide grains that are durable and safe. It also provides aggressive cutting action and longer service life.

Longest Lasting - Cutting wheels metal center and 0.045" thickness,provide the best balanced Cut Life, Cut Rate, Cut Precision,allowing you to cut longer.

Perfect Size - Outer diameter:4 1/2 inch inside diameter:7/8 inch, operating up to 13,300 RPM. fit for most angle grinders, such as Dewalt Makita Bosch milwaukee.

✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and stainless steel.

✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much more aggressive cutting in metal and stainless with safety and longer service life.

✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr-free cutting with minimal material loss, making the cutting project more precise and efficient.

DESIGNED FOR SHARP & CLEAN CUTTING ON - Exclusive top-grade raw materials and 0.04in ultra-thin thickness, optimized the performance of PEGATEC general purpose metal cutting wheels. The resulting fast cutting times keep at a minimum both burr formation and the thermal load both on the workpiece and on the cutting-off wheel. Which means less rework and higher efficiency.

SUPER LONG SERVICE LIFE - The cut off wheels 4 1/2 inch are suitable for professional scenes demanding high aggressiveness and long service life. Due to the perfect ratio of BASF resin and high-quality alumina, silicon carbide, they’re extremely durable with 2.5 times of service life than the conventional brands. For a good craftsman, this means that the time to replace the cutting disks is greatly saved.

MULTIFUNCTION AND SELF-SHARPENING - The PEGATEC PEGASTAR series angle grinder cut wheel is a special performance grade for performing demanding tasks. It had strong aggressiveness for metallic material such as iron, angle steel, stainless steel and ferrous metals. Its self-sharpening, provides balanced cutting performance throughout the cutting process.

🛠️【PERFECT SIZE】Perfectly compatible with all 4-1/2 inch(115mm) angle grinders with 7/8 inch(22.2mm) arbor. Thickness:0.045 inch(1.2mm). Operating up to 13,300 RPM.

⚙️【 PRECISE AND QUICKLY】0.045 inch ultra thin design for fast burr free and precise cutting perforamce with minimal material loss.

🦾【SAFETY - AVOID WHEEL SHATTER】Metal cutting discs are made of aluminum oxide grains. More safe than other wheels that may shatter or prematurely wear. Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

Turn your rotary tool into a cutting machine

Ideal for cutting slots bolts, screws, sheet metal and thin wood

The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.

Reversible blade rotation for ultimate cutting control

Powerstate Brushless Motor delivers maximum power and long motor life

Redlink Plus intelligence provides optimized performance and overload protection

[Diamond Technology] 1 equals 100, EZARC diamond cut off wheel delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.

[All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, alloy steel, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications.

[Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, increased productivity. The metal cutting disc is 100% contaminant-free, it does not wear down like bonded abrasives reducing dust particles for a cleaner work station.

【Grinding Wheel Set】4-1/2 inch angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel,3 pcs grinding wheel,3 pcs 80 Grid flap disc.Also with a sturdy carrying case for holding 4.5”cut off wheel for metal.

【Cutting Wheel】20PCS cut off wheels 4 1/2 inch has passed the CE&ISO certification, built for a more robust and safety cut off wheels.Fast burr free cutting with minimal material loss, Will not splash and cause injury.

【Grinding Wheel:】3 pcs premium 4-1/2 "* 1/4 "* 7/8 "Grinding Disc for metal and stainless steel, T27 bevel type, A24T Aluminum Oxide Grains for Aggressive Grinding and High Stock Removal. Operating up to 13,000 RPM and 80M/S. Meet almost all your general polishing requirements.

UNIVERSAL - Our cut off wheel has a CONSTANT DIAMETER that allows dry cutting of metal, rebar, iron, metal profiles, aluminium, different types of pipes and other sheet metals.

LONG LIFE - According to the test results, GRAFF BLACK enables us to make more than 5000 cuts. The increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the cutting segment.

CONVENIENT IN OPERATION - Our cutting wheel is more comfortable in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting.

10 Milwaukee Premium Type 1 Metal & Stainless Steel (INOX) Cutting Wheels | 4-1/2-Inch x .045-Inch x 7/8-Inch

Extremely thin .045-inch wheel design for fast, straight cuts with minimal burr

Industry's fastest rotating cutting speed for maximum productivity with the most demanding Metal & Stainless Steel cutting applications | Cuts up to 50% Faster, Lasts up to 20% Longer than Industry Standard 1/8" cutting wheels

.032" thick for faster cutting and reduced material waste

Zirconia Aluminum construction makes these wheels ideal for ferrous metals including stainless steel

Ultra thin design requires less energy for improved battery life when used with cordless grinders

Turn your Dremel rotary tool into a powerful cutting machine with the 11-piece EZ Lock Cutting Kit. Compatible with all Dremel Rotary Tools.

SMOOTH CUTS: The cut-off wheels included in the kit have been specially curated to perform all cutting applications, ideal for cutting in either metals or plastics.

QUICK ACCESSORY CHANGE: Variety of EZ Lock cutting wheels. The patented Dremel EZ Lock system makes accessory changes 6X faster than using a standard mandrel.

Turn your Dremel rotary tool into a powerful cutting machine with the Fiberglass Reinforced Cut-Off Wheels.

The 426B Cut-off Wheels are ideal for slicing, cutting, grooving, and trimming a variety of materials including hard and soft metals, marble, drywall, and plastic.

WORKING DIAMETER: 1-1/4" (31.8 mm), BLADE THICKNESS: 0.045” (1.1mm), MATERIAL: Fiberglass

Diamond Cutting Wheels 15 Pcs----- Match with 2pcs 1/8'' shank mandrels. The diamond cutting wheels are designed for rotary tools like dremel and replacement EZ545/544 lock cut off wheel. Great for cutting gems, glass and ceramics, expecially for 2-8mm standard bathroom tile.

Resin Cut Off Discs 15 Pcs-----Match with 2pcs mandrels. These cut off discs are compatible with most rotary tools, electric drills, hanging grinders, electric grinders as good as original dremel accessories. Great for cutting and grooving metal, fine wood, chassis modification, thin metal circuit board and DIY production.

HSS Circular Saw Blades 6 Pcs-----Match with 1pcs 1/4'' shaft and 1pcs 1/8'' shaft. There are 5 kinds of outer diameters 22/25/32/35/44/50mm. Ideal for cuting aluminium, brass, copper, wood and plastic.

★ 10 pcs RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting.

★ 6 pcs HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 6 kinds of outer diameters 22/25/32/35/44/50mm and the thickness of 0.8 mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc.

★ 10 pcs DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass.

【3 Types Mixed Cutting Wheel Set】: Goxawee cutting disc set provide 3 types cutting wheels, including diamond cutting discs, HSS cutting saw blades, and resin cutting wheels. It is an ideal for rotary tool’s beginners to learn how to use different wheels in DIY projects.

【Multi-purpose Cutting Discs】: The resin cut-off wheels set is suitable for all kinds of metal, soft alloy, aluminum, diamond cutting wheel set for stone, ceramic, glass, jade stone, HSS cutting disc for wood, plastic, PVC pipes. Can cover the different purpose for DIYers.

【High Quality Discs】:This disc set is made by premium material, it has high working efficiency, and perfect cutting effect, also can meet requirements of DIY enthusiasts.

SIZE: The cutting discs diameter: 22mm; Thickness: 0.6mm; Mandrel Diameter: 3.0mm; Screwdriver: 98mm.

APPLICATION: Designed for rotary tools and replacement EZ545/544 lock cut off wheel.

HIGH QUALITY AND DURABLE: The alumi/num oxide cut off discs are thin and sharp. It is completely coated with fine diamond particles.

Package Includes: 60Pcs Reinforced rotary tool cut off wheel and 4Pcs mandrels.

Size: 1-1/4 inch(32mm). Mandrel diameter: 3mm.

Material: Made of reinforced fiberglass. Reinforced rotary tool cut off wheel including tools suitable for Dremel, Chicago and Craftsman etc.

【Size】4-1/2-Inch x .047-Inch x 7/8-Inch

【PERFORMANCE】This is for a pack of 100 pieces of our cutting wheels Thin 0.045"" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S

【Advantage】Thin .045-Inch wheel design for fast burr free cutting Proprietary aluminum oxide grain combination for aggressive cutting action

【Function】This mounting mandrel is mainly designed for mounting 3/8” or 1/4” arbor hole and small diameter cutting wheel, the screw neck length fit 0.035" to 1/4" thick Type 1 cut-off wheels.

【Multi Uses】The die grinder mandrel consist of a shank with 2pcs different types threaded head, the chuck type arbor construction also can be used for mounting any other various type wheels, such as grinding, sanding, cleaning, polishing wheels or saw blades .

【Fit for Tools】The Cut-Off Wheel mandrel with 1/4” shank, fit for most grinder, drill rotary tools which can accept 1/4” stem mandrel. Easy mount and demount. Really the perfect essential die grinder accessory.

Universal: This 3” Metal Cut Off Blade 50 Pack is for use with most widely-used brands of cut off tools

Does the Hard Work for You: Metal grinding wheels for cutting sheet metal, sanding, leveling, and trimming

Abundant: This pack comes with 50 long-lasting metal cuff off blades