Best Powder Free Cut Resistant Gloves in 2026

Protect your hand from cuts and abrasions---The high performance cut resistant material HDPE is adopted and the gloves is awarded with the high EN388:2003 level 5 (EN388:2016 Level C) cut resistance certification. 10 times stronger than normal gloves.

Excellent comfort and dexterity to wear and grip--- flexible operation, Not too hard, No sliding. The special high elastic nylon is blended to make the gloves fit your hand so well.

Easy to keep clean and dry--- it is hand and machine washable and can be cleaned as kitchen dishwashing towel.

BRAND NEW 3-FINGER REINFORCED DESIGN FOR EXTRA PROTECTION AND COMFORT. We reinforced the three fingers most vulnerable to cuts with stainless steel thread. It makes that part of the gloves extra tough and durable. The rest is made of the cut resistant lightweight fabric you’re used to. This keeps the gloves elastic and comfortable, while giving you topical extra protection where you need it most.

EN388 LEVEL 5 CUT RESISTANCE RATING. Enjoy the highest level of protection on the market. Our tight-knit, lightweight protective gloves are more than 4 times tougher than leather. Slip them on to protect your hands from nicks and cuts whenever you’re about to use a knife, cutting or carving tools, a potato peeler, a mandoline slicer, or a straight razor.

PERFECT FOR MEN AND WOMEN AND AVAILABLE IN PLENTY OF SIZES. Forget about one size fits all work and safety gloves. Our cut resistant gloves come in 4 different sizes so that the fit is just right. Simply measure your palm diameter and the length of your middle finger and use the size chart to order the perfect-for-you fit.

HIGHEST CUT PROOF. Protect your hands from cuts and punctures while handling sharp metals, knife, blade, glass, plastic sheet, paper, construction materials, mandolin slicer, and cutting meat. Qualified CE EN 388 4544, ANSI Cut A4

COMFORTABLE ALL DAY LONG. Cru553 work gloves fit snug without constricting your fingers. Their 13-gauge cool yarn is made of HPPE and Spandex to give you second-skin dexterity, precision and protection

HIGH PERFORMANCE IN ALL CONDITIONS. Need to grab slippery tools or knives? Our foam nitrile rubber coating is anti slip even on greasy or wet surfaces. Water based and touchscreen friendly, it passed the FDA food contact coating test

Micro foam nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance

Knit wrist helps prevent dirt and debris from entering the glove

Coated gloves

2 PAIRS - 4 Gloves total in size medium

Durable – Made with 13 Gauge Knitted Seamless HHPE/Nylon, Polyurethane-coated work gloves.

Comfortable – Superior grip for hands of different sizes while being breathable and lightweight.

Micro-foam nitrile coating offers 360-degree breathability

Optimized, controlled grip.

Precision handling in dry environments.

SEAMLESS NYLON SHELL FOR MAXIMUM DURABILITY. We want you to feel great while working on your next project. That is why we used the best material to produce Acktra Work Gloves. For this model, we use synthetic shell, which is stronger than cotton. You will use them 2-3 times longer than your regular work gloves.

LATEX COATING FOR BEST GRIP. Our latex coating gloves offer a special coating for the palm and finger parts of the gloves. This coating will make your grip easy and at the same time will maintain all tactile senses. These gloves are perfect to work in almost any environment because our nitrile coating is not permeable for dust or fluids.

FIVE COLORS AND FIVE SIZES. Different sizes and colors are available to satisfy even highly demanding customers. We keep a broad spectrum of items to meet your size and color preferences. Choose between X-small, small, medium, large, or X-large sizes. Pick red, white, black, blue, or orange to your satisfaction. Why not look stylish when you work?

【ANSI A6 Cut Resistant】Schwer cut resistant gloves can meet cut level ANSI A6 in accordance with ANSI-ISEA 105: 2016. A6 cut-level gloves protect hands when encountering medium to heavy cut hazards, such as those found in automotive assembly, metal stamping and fabrication, and handling slitter blades.

【More Durable And Wear-Resistant】The content of HPPE in our gloves is twice that of similar gloves on the market. And add steel wire to improve them cutting resistance.The thicker PU coating also provides higher abrasion resistance to improve the durability of the glove. All these make them stronger and more durable than other PU cut-resistant gloves.

【10-Finger Touchscreen】- Touchscreen compatibility allows the user to operate a touch screen phone or device without removing work gloves. Purpose-designed for compatibility with all IT devices; All finger touch screen technology can be used for those who use the screen in their daily work.You don't have to spend time taking off your gloves and putting them back on every time you use your touchscreen device.

Level 9 Cut Resistant Glove：The knife proof glove is awarded with the highest level 9 cut resistance certification-- cut protection over entire hand. Cutting glove will keep you away from injured of extreme cut hazards.

Food Grade Cut Glove: Oyster shucking glove is woven from 316L stainless steel fine steel wire & high strength polyethylene fiber, which is food safe and suitable for food processing.What's more，this anti-cut glove is suitable for cutter factory, stamping factory or glass factory and butcher working.

Multi-Use in Kitchen & Working:This Level 9 knife resistant glove can protect your fingers from the risk of extreme cuts while cutting, slicing, shucking, carving and peeling food in kitchen. And also perfect for garden, butcher, construction work, fishing, and food processing while working.

COMFORTABLE:13 Guage Premium black nylon seamless knitted shell provides Bare Hand Sensitivity and Great Breathability! Light Weight with Good Grip! Thin enough to feel everything!

SUPERIOR PROTECTION:Gray Polyurethane coating offers excellent abrasion resistance and superior GRIP performance!

MORE:Knitted Wrist prevent dirt and debris from entering the gloves. CE CERTIFICATED EN388:2003 4131

Cut-resistant (A2 cut level) polyurethane-coated work gloves provide strength, dexterity, and protection against light to medium cut hazards

100% polyurethane coating gives the gloves excellent stretchability, flexibility, supreme touch sensitivity, and a reliable (non-sticky) grip

Made of blended material (44% polyethylene, 21% polyester, 16% nylon, 10% glass, and 9% elastane); includes 100% nylon finger insert for added reinforcement; extended cuff (38% polyethylene, 29% polyester, 13% nylon, 9% glass, 7% elastane, 4% elastodiene) deters materials from getting inside the glove

【ULTRA-FIRM GRIP】：Nitrile coated on palm and fingures provides quite good grip and anti-slip performance under dry and slightly wet and oily circumstances.

【LEVEL 5 CUT RESISTANT】：ANDANDA work gloves are made of HPPE material with high cut resistance performance.comply with EN388:2016 Level C cut resistance(Pass EN 388 2003 Level 5 Coupe Test), which is 4 times stronger than leather.

【COMFORT & DEXTERITY】：With ANDANDA cut resistant gloves, you can pick up screw with even 8mm dia. Excellent dexterity, tactile sensitivity, and fit their hands perfectly.

Maximum Cut Protection: EN 388:2016 4X43F and ANSI Cut Level A6 certified, offering protection against sharp edges, metal, glass, knives, blades, and construction materials.

Safe & Efficient Grip: With a sandy foam nitrile palm coating, these gloves provide a firm grip on smooth surfaces and in light wet or oily environments. They are also touchscreen compatible.

Versatile Use: Designed for both men and women, these gloves are perfect for wood carving, metalworking, logistics and warehousing, construction, gardening, carpentry, and fishing.

COLOR CODING ELIMINATES TOUCHING RAW MEAT AND THEN VEGGIES: Bright colors let you know immediately which glove is for meats, veggies, and other uses.

A GLOVE FOR EVERY USE: Unlike ordinary gloves sold in pairs, the TruChef Cut Resistant Gloves come in a convenient 3-pack, so you'll always have the right glove for any kitchen or household need.

THE HIGHEST LEVEL OF PROTECTION: TruChef Cut Resistant Kitchen Gloves meet the strict EN388 standard for Level 5 cut resistance to protect your fingers from even the sharpest knives.

Unmatched Protection: TELION cut-resistant gloves offer unparalleled protection with an EN388 Level 5 Cut Resistance, making them an ideal choice for anyone who works with sharp objects such as knives. You can work with confidence knowing your hands are safe and protected.

Comfortable Design: The gloves have a hexagonal pattern design that reduces bondage by up to 70%, ensuring you can work comfortably for extended periods. The combination of durable materials such as Polyethylene, Spandex, and Fiberglass means the gloves are both protective and comfortable.

Versatile and Convenient: These gloves are versatile and can be used in a range of settings where hand protection is necessary, not just in the kitchen. They are also 100% food safe and can be easily cleaned by hand or machine, making them a practical and convenient choice for any job.

✔️PROTECT YOUR HANDS FROM CUTS AND ABRASIONSE:The high performance cut resistant material HPPE is adopted and the gloves is awarded with the ANSI Cut level A3 cut resistance certification. 10 times stronger than normal gloves.

✔️SUPERIOR GRIP and EXCELLENT DEXTERITY:Micro-Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance. Economic designed comfortable 3D snug fit into all fingers.Ultrathin Design provide absolutely breathability and with water repellent performance.

✔️MORE DETAILS:Knit Wrist helps prevent dirt and debris from entering the glove.

Premium goat leather construction

Features a full Honeywell Spectra inner-liner for enhanced cut-resistance

Hatch Ergo-Cut floating thumb offers great dexterity

【ANSI A9 Cut Level】Oyster shucking glove provides cut protection for ANSI A9 rating, the highest level of cut-resistance over entire hand (palm and back)- Full coverage design and pre-curved shape for maximum comfort and optimum protection. A9 cut resistant glove is used for extreme cut hazards.

【Excellent Performance】Whittling glove is woven from 316L stainless steel fine steel wire. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers better abrasion resistance, higher corrosion resistance and temperature resistance. It is easy to clean and sanitize, due to its strength and corrosion resistance.

【Environment Friendly】Stainless steel is a green material because it is 100 % recyclable. Iron, chromium, nickel, and a few more metals are used to make stainless steel. These metals are non-renewable resources that are obtained from rocks. Due to these metals, stainless steel is a great option for the environment.

PLATINUM PROTECTION - Awarded with the EN388 level 5 cut resistance, highest cut resistance level material available on the market.

PLATINUM PROTECTION - Awarded with the EN388 level 5 cut resistance, highest cut resistance level material available on the market.

SUPERIOR GRIP - With 3 available sizes gives a snug fit for all, Lightweight and comfortable protection without the bulk.

Quest cut resistant gloves fit like a second skin, allowing for perfect dexterity. They are thin and lightweight, providing heavy duty protection while still allowing ease of movement and a secure grip while manipulating tools.

Patented GRAPHENE technology gloves have incredibly high tensile strength, offer superior cut, abrasion, and heat resistance. The density of Graphene is harder than a diamond, 200 times stronger than steel, and is the strongest material ever measured in the world.

Quest anti cut protective gloves feature ANSI A1 cut level, ANSI 6 abrasion level, and ANSI 2 puncture resistance for ultimate safety. They also provide UV protection for outdoor projects.

Winter work gloves provide warmth, protection, and dexterity

Coated with foam latex for puncture- and abrasion-resistant performance; acrylic liner offers added strength

Touch-screen capable (can be worn when using a smartphone or other digital device)

【Highest Level Cut Resistant Gloves】Schwer cut resistant gloves are rated for ANSI A9 cut resistance, the material in A9 gloves withstands over 6000+ gram weight from a sharp blade penetrating, so they can protect hands from extreme cut hazards than other cut gloves.

【Superior Abrasion Resistance】Nitrile-coated gloves are safe and provide an extra layer of protection against cut and oils. Nitrile has a high abrasion and puncture resistance.Knit wrist cuff offers a secure, comfortable fit and prevents cut gloves from slipping off during use.

【Safety Work Gloves With Super Grip】Good grip in dry and oil environment, shrink-roughened and thick sandy nitrile coating for a secure grip and durability. Easy to clean-you can easily throw them into the washing machine, no need to do it by yourself.

SEAMLESS HPPE SHELL FOR MAXIMUM DURABILITY. We want you to feel great while working on your next project. We used the best material to produce cut-resistant Acktra Work Gloves. We use a 13G white/black HPPE (high-performance polyethylene) level 5 cut-resistant shell for this model. You will use it up to 7 times longer than your regular safety gloves.

FINISH LATEX COATING FOR THE BEST GRIP. Our latex-coating protective gloves against mechanical risks offer a special coating for the palm and finger parts of the gloves. This coating will make you grip easily and the same time, will maintain all tactile senses. These gloves are perfect to work in almost any environment because our latex coating is flexible and not permeable to dust or fluids. HEAVY DUTY.

FIVE COATINGS AND FOUR SIZES. Different coatings and sizes are available to satisfy even highly demanding customers. The type of coating you need is your personal preference for the particular job you perform. We offer to choose between the 5 most favorite coatings for cut-resistant gloves or no coating option. Small, medium, large, or X-large sizes for you and your team just one click from you. Why don't feel protected and comfortable when you work?

Impact- and cut-resistant: designed to keep hands safe from smash and pinch hazards; 360-degree 13-gauge SilverSilk shell protects hands from cuts (ANSI/ISEA level A2)

Abrasion-resistant: sandy-nitrile-coated palm resists abrasion (EN388 rating: 4X42BP) and promotes a secure grip; suitable for wet, dry, or oily applications

Flexible comfort: breathable, seamless, soft knit material (no glass or steel); won’t irritate skin and allows for a high level of dexterity

✔HEAVY DUTY ANTI-SLIP WORK GLOVES: Palmer Safety's X64 gloves comes with black Nitrile palm provides excellent resistance to abrasion, cuts, and superior grip in dry and wet environments

✔ANSI CUT RESISTANCE: You will no longer be afraid of cutting your fingers when handling sharp edge metal, box, or rock with HPPE Palm work gloves that meet ANSI Cut Resistance Level A6 and an ANSI Puncture Level 4. *NOTE* It it not needle proof

✔LIGHTWEIGHT AND BREATHABLE: 13-gauge High-Performance Polyethylene backing provides moisture-wicking capabilities with the necessary flexibility for all jobs. The thumb and forefinger are reinforced for maximum wear resistance, and the Hi-Vis TPR stitching ensures excellent impact resistance

【Excellent Cut Resistance】The safety gloves are made from HPPE material with nylon liner for highest abrasion and tear resistance offers graded CE level 5 of anti-cut protection for safe use, which is ideal for electricians and carpenters.

【Power Grip & Non-slip】Benefit from the unique nbr sandy nbr coating, these cut proof gloves are safe, waterproof and oil-resistant, and comes with excellent grip provide excellent slip resistance, which can greatly improve your work efficiency. Convenient SMARTPHONE TOUCHSCREEN.

【Wide Applicability】These working gloves are widely used in assembling components, glass manufacturing, metal handling and handling applications, etc., which is perfect for protecting your hands from cutting and injuries when handling sharp steel plates, knives, blades, glass and cutting machines.

ANSI level A5 cut protection

Medium weight 10 gauge

Stainless steel reinforced knit construction

Provide sanitary protection while working in hot and wet applications such as dishwashing and changing steam pans

Can withstand temperatures up to 225° F

Seam-sealed glove construction, Watertight

CUT PROTECTION UP TO 3000 GRAMS - These gloves offer 3000 grams of protection against blade cut which is ideal for handling sheet metal, box cutting, glass cutting etc.

GET YOUR JOB DONE REAL QUICK – The adaptive fit makes these gloves mold onto your hands which leads to excellent fingertip dexterity. Working in gloves no longer drag you down.

THINNER BUT MORE DURABLE - Compared to counterparts, these gloves have 30% less thickness and a big improvement of abrasion resistance. 8000 cycles of sandpaper abrading would not abrade through.

【Ultra-thin & Protection】 When you slide your hand into this cut resistant glove, you will be taken back by the light weight, snug-fitting composition and question it’s protective values but rest assure. This Schwer glove is serious hand protection for serious professionals who demand the best in the class performance.

【A Second Skin at Work】 This glove features state-of-the-art cut-resistant composite yarns, these light weight, snug-fitting 18-gauge seamless knit gloves are the closest you can get to working barehanded without sacrificing cut, puncture and abrasion protection.

【Cutting Level for Medium Duty】These gloves are rated ANSI A4 cut resistant, all score A4 cut gloves can withstand 1,500-2,199 grams of pressure. With ANSI – A4 gloves, you can protect yourself from higher cutting hazards, such as assembly detail work, driving and working, package handling, warehouse work, wire handling, working outside etc. In addition, they are also great for woodworking, safety work, fishing, construction, gardening and other work scenes.