Best Alskar Diamond Diamond Saw Blades in 2026

7IN HIGH PERF ABRAS BLADE

7IN HIGH PERF ABRAS BLADE

7IN HIGH PERF ABRAS BLADE

7/8-Inch, 5/8-Inch arbor

Designed to cut fast in most tile materials

Tensioned steel core for stability

FIT SIZE: 180 x 10 x 1.6 x 22.23 mm. Outer diameter: 7 inch / 180mm. Thickness: 1.6mm. With reducer washer suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.

WIDE APPLICATION: Universal for dry or wet cutting. The super thin tile blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, slate, and cement backer board.

HIGH PERFORMANCE: Turbo mesh rim offer fast and smooth cutting experience for you with minimal chipping. PEAKIT premium-grade 7" diamond saw blade ensures a longer service life.

Taller 12mm segments are designed for longer life and faster cutting

General purpose blade for use cutting cured concrete, block and brick

Laser welded to ensure the strongest joint possible

Ideal for cutting a variety of wall and floor tile

Can be used to dry or wet cut

For use with Milwaukee M12 FUEL 3 in. cut off tool (2522)

UNIVERSAL - 10" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Kerb. Our 10" angle grinder concrete blade can be used both for dry and wet cutting.

INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time.

DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone.

UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb.

INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time.

DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone.

5/8-Inch arbor

Designed for clean cuts in most tile materials

Tensioned steel core for stability

Engineered to cut: tile, granite, marble, brick, brick pavers, concrete block, limestone and slate

Continuous rim-Inchwet-Inch minimizes chipping

Arbor size of 0.625-Inch

Exact specifications assuring the user a wobble-free blade that produces smooth and precise cuts

General purpose blade for wet cutting of ceramic

Diamond blade for long-lasting performance with minimal chipping

Engineered to cut: tile, marble, Porcelain

Continuous rim-Inchwet-Inch minimizes chipping

Arbor size of 0.625-Inch

QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project.

3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade.

CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results.

Universal for dry or wet cutting.

Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you.

Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal.

Wet or dry cutting.

Diameter 14", Segment Height 3/8", Inner hole 1"-7/8“-5/8”

Super thin porcelain tile saw blade with free chips for cutting,Match with hand-held machine.

⚙ S&R Diamond Cutting Disc 7 inch, Diamond Saw Blade for porcelain, porcelain stoneware, hard tiles, granite ⚙

⚙️ WIDE USE ➤ Porcelain, fine stoneware, hard tiles, granite, marble

⚙️ HIGH QUALITY DIAMONDS ➤ Only high-quality steel cores and extremely impact-resistant and temperature-resistant diamonds are used for S&R diamond wheels

Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile

High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut

5/8 in. Arbor fits most brands of wet tile saws

★Efficient: Unique turbo mesh rim blade and X teeth provide fast, precise, smooth cutting.

★Ultra-thin: For fast cutting and low waste. These ultra-thin Reinforced turbo blades are our fastest cutting discs for hard materials.

★High Performances: Thicker center to avoid vibrations and wobbling. Stiffening flange in centre ensures straight cuts.

【SIZE:】 Outer Diameter: 125mm (5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" or 4/5" Arbor.

【GREAT DESIGN:】 The Turbo-Mesh rim provides extremely smooth cutting finish on porcelain, marble, and ceramic tile. The Mesh rim design allows for less friction and more efficient heat dispersion.

【HIGH PERFORMANCE:】 Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling.

Basic quality diamond and economical cutting value.

H8D - general purpose concrete

Diamond depth 440 In (11mm)

HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more.

LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs.

CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust.

Designed for fast cutting stone

The high grade blades employ specially engineered dimaond to insure long life while cutting fast

Designed narrow turbo rim insures maximum speed with minimum of chippage

★【High Quality】Super thin and unique X-style teeth for high performance, offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling.

★【Size】Outer Diameter: 115mm (4.5 inch). Core: 22MM(Come with 20MM Ring). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" and 4/5" Arbor.

★【Compatible with】It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting.

Premium-grade, thin-rim diamond blade for fast wet cutting of porcelain, ceramic, granite and marble tile

Ideal for high speed cutting of hard masonry tile

Unique diamond-shaped laser cutouts prevent blade wobble and keeps blade cooler for a longer life

Premium-grade, thin-rim diamond blade for fast wet cutting of porcelain, ceramic, granite and marble tile

Ideal for high speed cutting of hard masonry tile

Unique diamond-shaped laser cutouts prevent blade wobble and keeps blade cooler for a longer life

10mm Segment Height, 0. 070" Segment Width, 5/8" Arbor

This supreme continuous rim tile blade utilizes special grade diamond for consistently fast, smooth and chip-free cutting for the most challenging jobs

Smoothly cuts all types of ceramic tiles, quarry tiles, porcelain, marble and granite tiles.

American Made and Family Owned- DEVOUR is one of the few diamond blade brands that is still proudly manufactured in the USA. Unlike most of our competitors, we do all of the R&D, design, and production for our premium products right here in America by employees across the midwest.

Our superior materials provide up to 100x longer life & 3x faster cutting on rebar, cast iron, concrete, pavers, tile, granite, laminate, PVC,and more. Every DEVOUR blade starts with the highest quality diamonds and carbon steel. This helps prevent fracturing and/or shattering of the blades.

The Advantages of Low-Temperature Electroplating- DEVOUR’s Electroplating process is commonly used in the aerospace industry because of its unparalleled precision. DEVOUR’s high-quality diamonds are bonded at low temperatures, fixing them securely to the bit without the use of damaging heat &/or pressure.

Taller 13mm segments are designed for longer life and faster cutting

Up to 4x longer life than competitive blades

For cutting concrete, block, brick, pavers, and roof tiles

4. 5" Vacuum Brazed All Purpose Diamond Edge Wheels for Tubular Metals, Non-ferrous Metals, Masonry Products, Tiles, PVC and Wood

All purpose diamond cut off wheel

Advanced diamond technology provides extreme cutting in wood, tubular metals, non-ferrous metals, masonry products, tiles and pvc

DURABLE: OA-BRES diamond blade use fully hardened steel blade body with thickened center ring ensure the low amplitude and low noise of the product during high-speed, extra height 10mm segment, consistent diamond content and even distribution guarantees a long lifetime even in the most demanding materials.

HEIGH EFFECTIVE：1mm super thin diamond cutting wheel adopts advance pressing process, more quantities and higher-grade diamonds not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction, provide more efficient cutting.

APPLICATION: X-Teeth tile saw blade can be used for both dry and wet, fast and smooth cutting for ceramic, tile, concrete, stone, brick, masonry, block, pavements. However, wet cutting can significantly increase life of the blade.

【SPECIFICATION】: 14"x.125"x.590"/15mm. Segment height 15mm. Arbor 1”-20mm bushing

【LONG &FAST CUTTING】：The diamond saw blade use high grade diamond and a premium bond matrix deliver long lasting performance. Fast cutting speed, durable and long cutting life.

【SMOOTH & CLEAN CUTTING】:The slots of diamond saw blade can improve air flow, cutting dust, dissipate heat and remove slurry, maintain the cutting performance