Best Meike Digital Camera Battery Grips in 2025

<p>Neewer battery grip designed for EOS 70D/80D/90D

<p>Powered by up to two Battery Pack LP-E6, six AA-size/LR6 batteries(Battery are NOT included)

<p>Improved ergonomics for comfortable holding

Large capacity battery grip designed for EOS-c with improved ergonomics for comfortable holding.

h Powered by up to two Battery Pack LP-E6, six AA-size/LR6 batteries, or optional AC Adapter Kit ACK-E6

h Features a variety of operating controls: shutter button, Main Dial, multi-controller, AF point selection button, AE lock/FE lock button, AF start button, and multi-function button.

Extends shooting capacity for the EOS 6D Mark II

Provides an auxiliary shutter release button

Provides comfortable Handgrip for vertical format photography.

The Battery Side Door for Gopro 8 provide access to USB port while battery and SD card are safely covered by the door, without fearing the battery will fall out.

The Clip on Battery Cover offers charging type C port for charging Gopro 8, so you can use power bank together with it, perfect for continuous shooting especially for recording time lapse or video.[Note: Not waterproof]

The Battery Lid offers connection for Microphone Adapter to add external mic,perfect for motovlogger youtube vlogging.

Type: Battery grip for the CANON EOS 550D 600D 650D 700D / Rebel T2i T3i T4i T5i

Can hold 2pcs LP-E8 batteried or 6pcs AA Batteries.

Same function as original Canon battery grip BG-E8. High quality product with big discount from the original one

Brand New Pro Battery Grip for Nikon D3100 D3200 D3300 SLR Camera; NOTE: Battery Holder for AA Batteries is NOT included; The handle shutter button function cannot be used without using the shutter release

Hold 2 EN-EL14 rechargeable Li-ion batteries.

Vertical shutter with half-press function. More comfortable vertical shooting.

Loads two NP-FZ100 batteries (sold separately)

Dust- and moisture-resistant sealing

Rigid magnesium for durability

Hold the camera vertically and maintain access to the shutter release button, front and rear command dials, Q button, focus lever, AE-L button, af-l button and FM button

Holds two additional batteries to increase the maximum number of shots to 1, 100 (in normal mode).

Dust-resistant, water-resistant and capable of operating at temperatures as low as -10 DegreeC/14 DegreeF

BG-E14 Replacement Battery Grip Effectively doubles your shooting time

Battery cartridge plate holds 2 LP-E6, LP-E6N Lithium Ion batteries - Grip is securely attached to the camera via the standard tripod mount

Vertical shutter release - AA cartridge plate holds 6 AA batteries for added convenience

Handling: the attached handle on a compatible camera improves handling during portrait shots

Compatible – suitable for EOS R5 and EOS R6 cameras

Box contents: BG-R10 battery handle

MB-D17 is a Multi-Power Battery Pack for the D500

Supplied with: MS-D12EN Li-ion Rechargeable Battery Holder, MS-D12 AA Battery Holder, Holder Case, Contact Cap, User's Manual and Waranty

MB-D17 can be powered by eight AA batteries or by a single EN-EL 15 or EN-EL 18a Lithium Ion battery

Battery grip for Canon digital camera EOS R

Enables high-volume shooting using up to two battery packs (LP-E6N/LP-E6)

Improved camera connection

Access to Battery and Memory Card Without Taking the Off the Grip

Extra Large Finger Grip for Added Comfort and Stability

All Metal Construction is a Perfect Match to the Camera Body

Space for 2x np-fz100 batteries doubles the operation time

Same grip and controls to match the look and feel of the Alpha 7R IV

Same enhanced dust/moisture resistance1 as the Alpha 7R IV

Compatibility: The battery grip (Replacement for Sony VG-C3EM) is compatibal with Sony A9 A7III A7RIII Cameras; With a 1/4 inch bottom screw thread, you can attach it to the tripod(NOT compatible with Sony A7SIII)

Function: Professional edition with vertical-grip shutter-release button, front and rear dials, AF-ON button, AE-L button, Multi-selector, making vertical shooting as easy as horizontal shooting

VERTICAL SHOOTING: Attractive and convenient vertical shooting shutter release function, increases the shooting stability and enhances the handle feeling

Fitting one extra BLH‑1

Dust, splash and freeze proof

Dedicated arrow pad, control dials and function buttons

A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort.

Holds two Li-ion batteries or six AA Battery for extended shooting

Li-ion Battery Info: DC 8.4V (max); DC 7.2V (mean) 19.2Wh/2600mAh

ERGONOMIC NON-SLIP GRIP FOR THE BEST VERTICAL COMPOSITION - Allowing more control and comfort, Vello BG-N19-2 is made to upgrade professional photography to the next level; features a quality rubber grip for better camera handling

ENHANCES SHOOTING IN PORTRAIT ORIENTATION - This battery grip provides an alternate shutter release, main and sub command dials, and function and AF-ON buttons so you can reach them by the finger

SUPPORTS HIGHER FPS - Alternatively use the grip with the EN-EL18b rechargeable battery (not included) for longer shooting times and frame rates up to 9 FPS, so you can catch more brilliant shots with the additional 2 fps

For Sony A9 A7R III A7III camera with vertical-shooting function,best choice for portrait shooting

Support screen lock function, support lock display mode.use low-power LCD screen

The Timer can Set Delay Time,Exposure Time,Time Interval and Number of Shots

The Hand Grip is designed for Panasonic Lumix GX9 / GX7 Mark III, GX85 / GX7 Mark II, GX80, replaces Panasonic DMW-HGR2

Opening for Battery&Card: The large opening on the bottom allows you to remove the battery & memory card without taking off the grip

Arca Swiss Plate: The bottom adopts Arca Swiss Type quick release plate design, so it can be mounted to Arca Swiss System tripods directly

Made of premium aluminium alloy and microfiber leather - Provides a comfortable, stable and secure grip for long time usage

Can be used on universal tripod as it is dovetail QR baseplate(arca-swiss type) with an extra 1/4"-20 screw hole for universal tripod plate

Does not block the battery and memory access, it allows you access the battery and memory without taking it off

【Compatibility】Compatible with Sony A9 A7III A7RIII Cameras as VG-C3EM.

【Vertical Shooting】Built-in vertical-grip shutter-release button, front and rear dials, AF-ON button, AE-L button, Multi-selector,give same feeling as horizontal shooting, suitable for portrait shooting.

【Double Power】Hold 1 or 2 pcs NP-FZ100 battery backup, give longer shooting time, suitable for outdoor photography.

Specially designed for NIKON D7100 D7200 DSLR camera.

With all the functions as the same as the original MB-D15 battery grip.

Can hold 1 * EN-EL15 Battery or 6pcs AA battery.(Not Included.)

Add double power design for your horizontal or vertical shooting time ,whether you are shooting portrait ,action,nighttime,landscape,architecture,street,astronomy,interior,wedding etc

Own C1,C2,C3 custom button and AF(auto focus), MF(manual focus), AEL(AE lock),front and rear thumbwheel adjusted functions

2.4G 100M transmission distance LCD display timer remote control, can setting the delay time, exposure time, interval and number of sheets photo

Quick release battery grip can hold 1 or 2 pcs NP-FW50 battery backup, doubling the battery capacity for more shooting time.

A tripod socket on the bottom of the grip can be mount on a tripod, lightweight, horizontal and vertical shutter fit different shooting experience.

Same function on the grip as the camera, not affected any function of the original camera VG-C2EM Battery Grip.

Equipped with a shutter release button; (NOTE:The handle shutter button function cannot be used without using the shutter release)

Vertical shot becomes as easy as horizontal shooting

It can be powered either by one or two EN-EL14a rechargeable Li-ion batteries. (Battery not included)

Note:Campatible with: Eos 800D/T7i/X9i/77D/9000D ; NOT fit Canon T7 camera

Battery type: 2 pcs LP-E17 Lithium battery (Not included)

Vetical shooting:with vertical release shutter, vertical shooting is easy as horizontal shooting. (The front and rear ends of the grip are equipped with dials, and there are grip switch and shutter button on the side of the grip)

The USB charging pass-through door with lid is specially designed for GoPro HERO11/HERO10/HERO9 Black, ensuring that the camera can be charged during long-term shooting.

While opening a hole at the interface to facilitate plugging and unplugging of the data cable, a closable warehouse door is added.

In daily storage and use, it can effectively prevent the intrusion of foreign objects from causing damage to the data interface.

Jjc TA-GR2 thumbs Up grip is specially designed for Ricoh GR II

Provides a secure hold during shooting adds comfort while holding camera

Slides into camera's hot shoe does not interfere with controls

Specially designed for Fujifilm X-Pro3 X-Pro2 and X-Pro1

Provides a secure hold during shooting, adds comfort while holding camera

Slides into camera's hot shoe mount, silicone pad design for better protecting your camera